B0 Error

[easyas123abc]

Hey, I have tired to prg my funcard (funcard 2) but have had no luck.... After spending half the day reading post after post. I found out that my card is locked/blocked.

In the eng menu I get a code which says RevB04.

Can someone please shine some light....

[Tesla]

When you say you have had no luck do you mean you are not able to program the card or you can program the card but it dosent work?

[Marc]

If your trying to read your funcard in nagraedit then thats why!!
Just use your programmers software to program the FILES to the card, create your external eep using either toxic or nagra andsave as a bin file,
Locate the latest flash file for your provider,
Open programmer software
Load EXTEEP file (toxic or nagra file you created)
Load FLASH (area file)
Write EXT FIRST
Write FLASH LAST

Job done,

Marc

[easyas123abc]

Dudeee (Marc) i have tired that like 10 millions time in every possible way... I program my card and still no result...

Telse - I can program my card using infinity but it dose not work.

Wen I go into the eng menu is say RevB04

[Marc]

It will say Rev B04 thats the revision on the image your using on the card lol thats normal,
The image yourusing, what are you creating it with? ie nagra or toxic?
If nagra have you checked the rights and expire dates on standard tier8??
Are you using the right files (ext and flash) for your area?? there are 4 possible sets you could use?
Are you converting the ext image from bin to hex ? if so then DONT just prog the bin file,theres no other reason why it wouldnt work, and also b04 isnt locked!!!

Marc

[easyas123abc]

Dudee

Iam using nagra 4.1 in phoneix mode infinity

This is what I see in teir 8

Modification Date = 1C 21 = (Nagra Date Convertor 1/1/2006)
Begin Date = 19 29 = (Nagra Date Convertor 9/9/2004)
Expire Date = 39 9F = (Nagra Date Convertor 12/31/2020)
Rights Date = 21 22 = (Nagra Date Convertor 9/2/2008)


The flash I'm using is from biq Mac 8th April Prue ntffL "Funcard fix AU Released 14/04/08 " Under card files. Is this correct as I'm in ntffL area?

In nagra the image is saved as extenstion .bn11 wen saving I change the extenstion to .bin

Pleaseeeeeeeee let there be light.....

[Marc]

Well if the rights is 9/2 then its expired and needs changing although i suspect youll find it is in fact 02/09/2008 as nagra date puts the format in us format (MM/DD/YYYY) in which case its ok at the moment but will go off on 2nd september this year.
What area are you in??
It maybe the files your usiung are in fact wrong,are you sure your in pure ntl and not excw?
If your getting nothing but a blank screen with no error messages then id say bk is wrong,
When you enter the ird how are you entering it??
just enter it as it appears so fior instance 121B2241 dont enter it in reverse,
Are you using a camid (shouldnt matter at the moment but will do.....if pure use prefix 24****** use numbers 0-9 and letters A-F)
In nagra are you changing the save file type as: to ALL FILES at the bottom otherwise it will save it as a bn11.bin.bn11 !!!
The revision B04 is normal that is the revision of the file on the card ie the nagra file thats ok and normal,its either a netid problem,a file problem,or a box problem,
How did you get your bk?? if its a 1000 box then pm me the ird and ile check the DB for you,

Marc

[easyas123abc]

Hi Thanks

I'm in a pure ntl area
Nope there is no blank screen... wen the card goes in it loaded up with some code on the box ap:random number and LP:random number and then either goes to channel 999 or 101 but mostly 999 I wait about 30 min and try changing channel but is say smart card error.

I have entered my ird backward and forward but still no result

This is my cam id in nagra:

{Code Space} CAM ID: 13 01 19 57
{Low Provider Info} CAM ID: 13 01 19 57
{High Provider Info} CAM ID: 13 01 19 57
Which 1s from the above do I need to change if any?

At the end the image only contains the extenstion .bin example image.bin

Is the flash which I'm using from my previous post?

Your advice is much appericated brooo.

[Marc]

Change camid to 24 then whatever you want after it, ie 24A16481 and see how it goes,, if not then id say netid is wrong mate,what is the netid in the engineers menu and also is defualt freq correct

[easyas123abc]

Dube I have just pm you with the netid and freq...

Which out of the three cam id do I change.

Wen I turn the bx on it display these codes

pl21
pl 03
ap 10
ap 21
ap 31
ap 50
ap 53

Some of them stay on and some changing in accedning order but the last is ap 53 and then it goes to chn 999 and display a msg "ur smart crd may nt be inserted proplerly... etc" If msg is also displayed wen i up the bx to update and it change channel.