Unable to read Or Write MOSC - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

easyas123abc · 25-05-08, 12:48 AM

I have a mosc and wen I put it into the infinity usb its says "OS Card: Unknown ATR". There after I put program in vcp (phonenix) mode and try to read the card in Nagra 4.1 but I get the error below:

Opening of COM1 was successful
ATR String: *************************************
*************************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 5C
CamID: ********
Using BD3 Key: ***********************************
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Error changing decrypt keys
Write error encountered, attempting to restore original decrypt keys
ProviderID: 5C
CamID: ********
Attempting to login to BD3
Error, unabled to restore decrypt keys
Decrypt keys:*****************************************
**************************************
**************************************
**************************************
**************************************
Reading ROM11 failed
Closing of COM1 was successful

And if I try it again is displays this err msg.

Opening of COM1 was successful
ATR String: ********************************
*************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 81
CamID: 00 00 00 00
Using BD3 Key: ******************************************
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason

Also as this msg has come up I'm not able to read the "Data Editor" tab to get information.

Please advice...

Thanks

rizlaman · 25-05-08, 12:58 AM

Quote:

Originally Posted by easyas123abc

I have a mosc and wen I put it into the infinity usb its says "OS Card: Unknown ATR". There after I put program in vcp (phonenix) mode and try to read the card in Nagra 4.1 but I get the error below:

Opening of COM1 was successful
ATR String: *************************************
*************************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 5C
CamID: ********
Using BD3 Key: ***********************************
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Error changing decrypt keys
Write error encountered, attempting to restore original decrypt keys
ProviderID: 5C
CamID: ********
Attempting to login to BD3
Error, unabled to restore decrypt keys
Decrypt keys:*****************************************
**************************************
**************************************
**************************************
**************************************
Reading ROM11 failed
Closing of COM1 was successful

And if I try it again is displays this err msg.

Opening of COM1 was successful
ATR String: ********************************
*************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 81
CamID: 00 00 00 00
Using BD3 Key: ******************************************
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason

Also as this msg has come up I'm not able to read the "Data Editor" tab to get information.

Please advice...

Thanks

Iv had this error a few times but i just wrire again and its all write the only other thing looks like is card not open properly thats a strange one mate try giving card a good clean.

rizlaman · 25-05-08, 01:01 AM

The second read you showing is the sign i get wen not opened properly.

reddiesel · 25-05-08, 01:02 AM

You need to use patch file A3E-B09 in nagra 4.1 It will wipe bk, if you need bk try boxget pc2 first, both are in downloads.

easyas123abc · 25-05-08, 01:05 AM

Dude i cnt even write wnt let... tired giving it a clean still same place.

When i try to write i get this msg:

Opening of COM1 was successful
ATR String: ********************************
*************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 82
CamID: 00 00 00 00
Using BD3 Key: ******************************
Attempting to login to BD3
BD3 login failed
Writing ROM11 failed
Closing of COM1 was successful

Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason

Thankks

reddiesel · 25-05-08, 01:09 AM

Quote:

Originally Posted by easyas123abc

Dude i cnt even write wnt let... tired giving it a clean still same place.

When i try to write i get this msg:

Opening of COM1 was successful
ATR String: ********************************
*************************
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 82
CamID: 00 00 00 00
Using BD3 Key: ******************************
Attempting to login to BD3
BD3 login failed
Writing ROM11 failed
Closing of COM1 was successful

Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason

Thankks

Did you read my post above ?

easyas123abc · 25-05-08, 11:19 AM

Yep sorry, i guess your post was posted while I was writing my post.

Thanks for the speedy reply.

fieryfox · 25-05-08, 11:28 AM

you could try mrom to reset backdoor keys and then use nag

easyas123abc · 25-05-08, 12:20 PM

Thanks

I'm seeing this msg on nagra:

Efficiency: 38.3%, Packets: 214, Retries: 132, Restarts: 2, Time: 45.91s
Closing of COM1 was successful

As the efficiency is low... is bad?

Also what does the efficiency mean?

Would it also be possible to increase efficiency?

Thanks

Marc · 25-05-08, 05:17 PM

The likelyhood is the card has a blocker on it being that revision,altho the provider id looks odd?
If you dont want the details then try mrom, if not then unloop it,

Marc

25-05-08, 12:48 AM	#1 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Unable to read Or Write MOSC I have a mosc and wen I put it into the infinity usb its says "OS Card: Unknown ATR". There after I put program in vcp (phonenix) mode and try to read the card in Nagra 4.1 but I get the error below: Opening of COM1 was successful ATR String: *********************************** ********************************* ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 5C CamID: **** Using BD3 Key: ******************************* Attempting to login to BD3 BackDoor login verified Dumping Dataspace Error changing decrypt keys Write error encountered, attempting to restore original decrypt keys ProviderID: 5C CamID: **** Attempting to login to BD3 Error, unabled to restore decrypt keys Decrypt keys:************************************* ********************************** ********************************** ********************************** ********************************** Reading ROM11 failed Closing of COM1 was successful And if I try it again is displays this err msg. Opening of COM1 was successful ATR String: **************************** ********************* ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 81 CamID: 00 00 00 00 Using BD3 Key: **************************************** Attempting to login to BD3 BD3 login failed Reading ROM11 failed Closing of COM1 was successful Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason Also as this msg has come up I'm not able to read the "Data Editor" tab to get information. Please advice... Thanks

25-05-08, 01:01 AM	#3 (permalink)
rizlaman modfather Join Date: May 2008 Posts: 586 Thanks: 18 Thanked 65 Times in 58 Posts	Re: Unable to read Or Write MOSC The second read you showing is the sign i get wen not opened properly.

25-05-08, 01:02 AM	#4 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: Unable to read Or Write MOSC You need to use patch file A3E-B09 in nagra 4.1 It will wipe bk, if you need bk try boxget pc2 first, both are in downloads.

25-05-08, 01:05 AM	#5 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Re: Unable to read Or Write MOSC Dude i cnt even write wnt let... tired giving it a clean still same place. When i try to write i get this msg: Opening of COM1 was successful ATR String: ****************************** ********************* ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 82 CamID: 00 00 00 00 Using BD3 Key: **************************** Attempting to login to BD3 BD3 login failed Writing ROM11 failed Closing of COM1 was successful Please not that the "*" sign is not displayed in Nagra this is just put by me for any security reason Thankks

25-05-08, 11:19 AM	#7 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Re: Unable to read Or Write MOSC Yep sorry, i guess your post was posted while I was writing my post. Thanks for the speedy reply.

25-05-08, 11:28 AM	#8 (permalink)
fieryfox Junior Member Join Date: Apr 2008 Posts: 3 Thanks: 4 Thanked 1 Time in 1 Post	Re: Unable to read Or Write MOSC you could try mrom to reset backdoor keys and then use nag

25-05-08, 12:20 PM	#9 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Re: Unable to read Or Write MOSC Thanks I'm seeing this msg on nagra: Efficiency: 38.3%, Packets: 214, Retries: 132, Restarts: 2, Time: 45.91s Closing of COM1 was successful As the efficiency is low... is bad? Also what does the efficiency mean? Would it also be possible to increase efficiency? Thanks

25-05-08, 05:17 PM	#10 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 647 Thanks: 18 Thanked 182 Times in 143 Posts	Re: Unable to read Or Write MOSC The likelyhood is the card has a blocker on it being that revision,altho the provider id looks odd? If you dont want the details then try mrom, if not then unloop it, Marc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW J-TAG 3.6 BYTES please read before the questions are asked	spikebaby	Cable TV Chat	24	17-10-09 09:31 PM
Obtaining IRD / BK From MOSC Card Using Dynamite+	stick_dog	Cable TV Chat	3	20-04-08 08:26 PM
V+ - Mosc or what? doesnt go past powering up. After everythin was working	zxcvbnnm	Cable TV Chat	10	05-03-08 06:36 PM
Probs setting up mythtv	jontydog	Satellite TV on PC	36	27-08-06 07:15 PM
Unlocking Solutions - What they do with an opinion.	Realist	Unlocking	0	18-09-05 11:38 AM