ambit 200 connection problem TCP CONNECTION FAILURE - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

mainblazer123 · 25-05-08, 09:24 PM

HI THERE COULD ANY ONE HELP ME WITH THIS? I HAVE FLASHED THE 200 WITH ALL THE FIRMWARE BUT WHEN I TRY TO CONNECT TO ambitconfig0.971beta IT COME BACK WITH TCP CONNECTION FAILURE

.....

WHAT COULD THIS BE

666 · 25-05-08, 09:26 PM

try serial if you got 1

mainblazer123 · 25-05-08, 09:41 PM

I Did Try That But Gave Me A Different Problem

666 · 25-05-08, 09:56 PM

im not to clever on this 1 but make sure you got a ip brfore you connect ambitconfig0.971beta

mainblazer123 · 25-05-08, 09:58 PM

What Do You Mean

666 · 25-05-08, 10:00 PM

check you got a ip, its not half way through the boot like 0000

mainblazer123 · 25-05-08, 10:14 PM

Ok Cheers Ill Give It Ago......

When I Try To Connect To
192.168.100.1:1337 It Dont Connect To That Aswell

aviz06 · 26-05-08, 12:44 AM

re-flash your modem again with the firmware, (13.5full.stealth.bin) then use AMBIT TOOLS!! That should Work... Try and Read the Manual Closely!!!

madadd · 26-05-08, 11:13 AM

Hi

It sounds as though there is no IP, connect using hyperterm and set IP.

Type the following:
cd /cm_hal
scan_stop

then

cd /non-vol/doc
dhcp_settings

then follow instructions for setting IP.

If you look in the haynes manual under Ambit250 it shows you.

I found that the Ambit tool sets the incorrect modem setting for PureN*l, so i configured mannually, just as easy and gives you a better knowledge of the modem software and settings.

madadd

mainblazer123 · 26-05-08, 07:57 PM

cheers ill try that thanks alot

25-05-08, 09:24 PM	#1 (permalink)
mainblazer123 Senior Member Join Date: Aug 2007 Posts: 162 Thanks: 2 Thanked 6 Times in 5 Posts	ambit 200 connection problem TCP CONNECTION FAILURE HI THERE COULD ANY ONE HELP ME WITH THIS? I HAVE FLASHED THE 200 WITH ALL THE FIRMWARE BUT WHEN I TRY TO CONNECT TO ambitconfig0.971beta IT COME BACK WITH TCP CONNECTION FAILURE..... WHAT COULD THIS BE

25-05-08, 09:26 PM	#2 (permalink)
666 yous the bloody search bu Join Date: May 2008 Posts: 567 Thanks: 19 Thanked 86 Times in 80 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE try serial if you got 1

25-05-08, 09:41 PM	#3 (permalink)
mainblazer123 Senior Member Join Date: Aug 2007 Posts: 162 Thanks: 2 Thanked 6 Times in 5 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE I Did Try That But Gave Me A Different Problem

25-05-08, 09:56 PM	#4 (permalink)
666 yous the bloody search bu Join Date: May 2008 Posts: 567 Thanks: 19 Thanked 86 Times in 80 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE im not to clever on this 1 but make sure you got a ip brfore you connect ambitconfig0.971beta

25-05-08, 09:58 PM	#5 (permalink)
mainblazer123 Senior Member Join Date: Aug 2007 Posts: 162 Thanks: 2 Thanked 6 Times in 5 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE What Do You Mean


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

25-05-08, 10:00 PM	#6 (permalink)
666 yous the bloody search bu Join Date: May 2008 Posts: 567 Thanks: 19 Thanked 86 Times in 80 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE check you got a ip, its not half way through the boot like 0000

25-05-08, 10:14 PM	#7 (permalink)
mainblazer123 Senior Member Join Date: Aug 2007 Posts: 162 Thanks: 2 Thanked 6 Times in 5 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE Ok Cheers Ill Give It Ago...... When I Try To Connect To 192.168.100.1:1337 It Dont Connect To That Aswell

26-05-08, 12:44 AM	#8 (permalink)
aviz06 Member Join Date: May 2008 Posts: 92 Thanks: 5 Thanked 12 Times in 10 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE re-flash your modem again with the firmware, (13.5full.stealth.bin) then use AMBIT TOOLS!! That should Work... Try and Read the Manual Closely!!!

26-05-08, 11:13 AM	#9 (permalink)
madadd Member Join Date: Oct 2007 Posts: 59 Thanks: 0 Thanked 0 Times in 0 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE Hi It sounds as though there is no IP, connect using hyperterm and set IP. Type the following: cd /cm_hal scan_stop then cd /non-vol/doc dhcp_settings then follow instructions for setting IP. If you look in the haynes manual under Ambit250 it shows you. I found that the Ambit tool sets the incorrect modem setting for PureN*l, so i configured mannually, just as easy and gives you a better knowledge of the modem software and settings. madadd

26-05-08, 07:57 PM	#10 (permalink)
mainblazer123 Senior Member Join Date: Aug 2007 Posts: 162 Thanks: 2 Thanked 6 Times in 5 Posts	Re: ambit 200 connection problem TCP CONNECTION FAILURE cheers ill try that thanks alot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ambit 250 - 250 configurator - no connection problem	VJ_UK	Cable Modems	4	12-02-08 12:25 AM
Connection Problem	MyModemIsBroke	Cable Modems	1	05-01-08 11:35 AM
Bios Bleeps	Tee_111	PC Software	1	28-08-07 01:32 PM
Advanced Windows skills	AhmedMostafa257	Internet	12	23-04-06 09:32 AM
Dun code for windows	Realist	PC Hardware	4	06-03-06 03:36 AM