ambit 250 and jtag - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

bartski · 28-05-08, 12:15 AM

hello, i can't find tutorial for ambit 250, i have to lift the chip and use jtag cable because got a new fw, but don't know where jtag points are or there is some different way on 250? if somebody got tut

send me pls.

i did it · 28-05-08, 10:39 AM

if you are lifting the chip use a willem with tsop 48 on then re-programme the chip
no need to jtag ( dont think you can tbh )
regards

bartski · 28-05-08, 08:48 PM

i know that i can use a willem prog. but i heard that people doing 250 with jtag so that i want to try something new

Boltar · 28-05-08, 11:40 PM

You can jtag the 200's with a black cat but you will need to remove the tsop on the 250, if you need help removing and re-programming pm me.

tagtech2008 · 29-05-08, 12:35 AM

the 250 can be jtagged but beleive me when i say its a pain in the arse you need to cut a hole in the back of the modem to access the pinouts of the bcm directly theres pics of it floating about from when i originally traced the pinouts and posted in another forum i can be done but its easier to lift the tsop if youve got a willem to hand.

bartski · 29-05-08, 08:22 PM

ok, thanks for info, i thought that it is easy to do bu jtag, so i'll stay on willem

gaz0123456 · 31-05-08, 01:05 PM

can any one tell me what the connections are on the 250 5 pin (tx rx - +) thanks

bartski · 03-06-08, 09:36 PM

GND TXD Vcc RXD GND, BCM on right side

28-05-08, 12:15 AM	#1 (permalink)
bartski Junior Member Join Date: May 2008 Posts: 10 Thanks: 1 Thanked 0 Times in 0 Posts	ambit 250 and jtag hello, i can't find tutorial for ambit 250, i have to lift the chip and use jtag cable because got a new fw, but don't know where jtag points are or there is some different way on 250? if somebody got tut send me pls.

28-05-08, 10:39 AM	#2 (permalink)
i did it Member Join Date: May 2008 Posts: 45 Thanks: 0 Thanked 7 Times in 7 Posts	Re: ambit 250 and jtag if you are lifting the chip use a willem with tsop 48 on then re-programme the chip no need to jtag ( dont think you can tbh ) regards

28-05-08, 08:48 PM	#3 (permalink)
bartski Junior Member Join Date: May 2008 Posts: 10 Thanks: 1 Thanked 0 Times in 0 Posts	Re: ambit 250 and jtag i know that i can use a willem prog. but i heard that people doing 250 with jtag so that i want to try something new

28-05-08, 11:40 PM	#4 (permalink)
Boltar Junior Member Join Date: May 2008 Posts: 29 Thanks: 0 Thanked 3 Times in 3 Posts	Re: ambit 250 and jtag You can jtag the 200's with a black cat but you will need to remove the tsop on the 250, if you need help removing and re-programming pm me. __________________ AKA Overburnit - Cable King.

29-05-08, 12:35 AM	#5 (permalink)
tagtech2008 Junior Member Join Date: May 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: ambit 250 and jtag the 250 can be jtagged but beleive me when i say its a pain in the arse you need to cut a hole in the back of the modem to access the pinouts of the bcm directly theres pics of it floating about from when i originally traced the pinouts and posted in another forum i can be done but its easier to lift the tsop if youve got a willem to hand.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

29-05-08, 08:22 PM	#6 (permalink)
bartski Junior Member Join Date: May 2008 Posts: 10 Thanks: 1 Thanked 0 Times in 0 Posts	Re: ambit 250 and jtag ok, thanks for info, i thought that it is easy to do bu jtag, so i'll stay on willem Last edited by bartski; 29-05-08 at 10:23 PM.

31-05-08, 01:05 PM	#7 (permalink)
gaz0123456 Member Join Date: Dec 2007 Posts: 82 Thanks: 1 Thanked 2 Times in 2 Posts	Re: ambit 250 and jtag can any one tell me what the connections are on the 250 5 pin (tx rx - +) thanks

03-06-08, 09:36 PM	#8 (permalink)
bartski Junior Member Join Date: May 2008 Posts: 10 Thanks: 1 Thanked 0 Times in 0 Posts	Re: ambit 250 and jtag GND TXD Vcc RXD GND, BCM on right side Last edited by bartski; 03-06-08 at 09:39 PM.