2100c 3.6 debug mode / Downgrade

[callum16]

Sorry to be a pain i have asked this before
Will my 2100c on 3.6 go into debug mode?
because i cant get it to and i am told it wont.

it was on 3.5, so i jtagged, got thrown a rong code, programmed a card to that code and in testing it, it updated.

So when do i jtag? was told to boot box up as normal with cable feed
and then jtag, but this just wont work.

i have also read an earlier thread about forcing a downgrade by changing net id to an area still on 3.5, but to program the exteep i need bk?

PLEASE HELP LOL

Thanks Callum

[spikebaby]

jtag it on stream with the latest bytes, you do not have to put it in dbug mode

[callum16]

so your saying, power up as normal, with cable feed in, put on bbc 1
then its fine to jtag?

? ? ? ?

thanks

is the ntl pure byte - 0x00895934

[ouzi1212]

Boot the box up with jtag connected, no cable feed. Wait till display shows LD:20. Press and hold down arrow button on front of box for about 5 seconds or release when display reaches LD:40, this will take the box to debug mode.

[callum16]

thanks to all, done it

[spikebaby]

Originally Posted by ouzi1212

Boot the box up with jtag connected, no cable feed. Wait till display shows LD:20. Press and hold down arrow button on front of box for about 5 seconds or release when display reaches LD:40, this will take the box to debug mode.

he is running 3.6 you cannot do it that way mate, it has a different boot loading system and sequence now

[tech53]

So How Exactly Did You Do It,as It's Totally Bending My Head Tried Every Way Poss, Just Keep Getting Message Unable To Put Device Into Background Mode..please!! Help

[rizlaman]

eny i know of eny areas still on 3.5 softwear if so can i have net id?

[i did it]

jtaged a 2100 on 3.6 yesterday same way as before wait till ap52 then box is in debug mode & jtag away
hope this helps clear things up abit
regards