macs

[gaz0123456]

hi all,

iv got some macs, some of them have got HFCP IP but none of them have got TFTP IP, do i need the TFTP IP? i dont know what to do with them, can i use them or have i got to swap them? thanks

[aviz06]

Originally Posted by gaz0123456

hi all,

iv got some macs, some of them have got HFCP IP but none of them have got TFTP IP, do i need the TFTP IP? i dont know what to do with them, can i use them or have i got to swap them? thanks

what do they start with, 62***** or sumat..

Yes u need the TFTP Address, and use ur own cause this is vital to get u on net..

[gaz0123456]

all the mac's start with 00 and the HFCP IP start with 86 and 82. i know the TFTP IP for my area but dont know where to enter it? i would bo greatfull for any help thanks.

[aviz06]

Originally Posted by gaz0123456

all the mac's start with 00 and the HFCP IP start with 86 and 82. i know the TFTP IP for my area but dont know where to enter it? i would bo greatfull for any help thanks.

Just open up AMBIT TOOL, and enter it under TFTP Server IP, U Dont put the HFCP IP, it picks that up Automatically..

[gaz0123456]

sorry to come across a little bit thick but what will the ambit tool do?

[aviz06]

it inputs all ur configs that u need to get ur modem online once its been flashed..

[gaz0123456]

so is that all i need to do, is to put the correct information in the right box?
modem- ambit 250

area- uk n*l(ex cw)

fimware- infinite fw (whats the difference)?

connect- serial max232

modem ip-

com port- 1

username- admin

password- infinite


(uncheck)- cm_annex 3 fix
(check)- set MAC addresses
(check)- override TFTP cfg
(check)- Disable BPI



modem MAC address ( working mac sniff out from differnt ubr)?

USB NIC MAC address ?????

TFTP server IP- 80.5.160.23 ( stoke-on-trent)

TFTP filename- unreg.cm ( whats the difference )?


then after all that just press APPLY?

thanks for all the help

[zedsdead]

have u tried the 250 configurator (c)boltar (is that the same boltar on this board ?)
these are the setting that work in bolton ex-cw

tuner type 19
annex mode 3
ds freq 586750000
admin status 2
config file dont matter to me because i cant force a config anymore, but try cmreg-ntlhm250-bund03.cm
tftip u know that already
force config this one depends on if forcing works or not
telnet enabled needs a tick or u cant telnet next time
dl tries 0
i would change the telnet user name and password (see the change button next to user name)

[gaz0123456]

ill try that then let you know how i get on thanks mate