Sammy 2110 (problems) please help!! - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

imybash · 06-06-08, 03:06 PM

Hi all,
Need some help, i got a sammy 2110, with a piared card. Iv managed to glitch the card and get the BK off, but im having problems getting any channels, i only get FTA channels.. others channel info appears but i dont get a picture.
I did notice when i plugged the box in, the pin and netid were reset??? so i set the netid from the engineers menu? seams to have worked coz its remebered it, same with the pin? iv tried a MOSC and Funcard4 but no joy. in the tech stuff menu card status is OK (does that mean its a paired card)?
i also have noticed when i go to the engineers menu that installation status page 5 says possible problems underneath it says CM lock Status (Unlocked).... also on page 9 Docsis upsteam everything is blank aprt from last locked power which is 53?
Note i have a samsnug chip programmer but dont know how to use it? if needed
any help would be nice?
thanks...

spikebaby · 06-06-08, 03:27 PM

oes your bk start 9d 56 if so fake bk

imybash · 06-06-08, 03:31 PM

no bk is 5EB07**FA**9674D, anyhows wouldnt the box report the card as not being paired?

spikebaby · 06-06-08, 03:38 PM

double check it when you write it .
also ird goes .. .. .. 3e

imybash · 06-06-08, 03:39 PM

have done! could it be something to do with the upstream? or the chip/netid

spikebaby · 06-06-08, 03:51 PM

set therites and expirey in standard tier to 21 23

then force a update on the syb by holding all 2 top buttons l r and up

kian02 · 06-06-08, 03:56 PM

think you may need to check dates on image m8 and that u used one for right area the upstream means no tb if you aint cut it then prob tw as box form dif area wont lock in your area with them

rawsy · 06-06-08, 07:51 PM

the card would show up as ok if the ird was correct, the bk could still be wrong

imybash · 06-06-08, 09:03 PM

hmm yes i think that might be the case i have contacted the seller and she explained, that she had 2 boxes and the card could have been mixed up, but the bad thing is that the other box was also sold on ebay ! iv emailed the buyer and the seller to see if they still have access to the card? fingers crossed

homer@shack · 07-06-08, 10:45 AM

convert the bar code numder 104********* fron decimal to hex using windze calc in scientific mode

check dec box is checked
enter nunber eg. 1043617400
check the hex box and ird will be displayed, 3e345678 for the above example.

if this matches the card either you or the person you got box from has messed up. if it dont hope the ebay buyer gets back to you with good news.

06-06-08, 03:06 PM	#1 (permalink)
imybash Member Join Date: May 2008 Posts: 67 Thanks: 2 Thanked 8 Times in 7 Posts	Sammy 2110 (problems) please help!! Hi all, Need some help, i got a sammy 2110, with a piared card. Iv managed to glitch the card and get the BK off, but im having problems getting any channels, i only get FTA channels.. others channel info appears but i dont get a picture. I did notice when i plugged the box in, the pin and netid were reset??? so i set the netid from the engineers menu? seams to have worked coz its remebered it, same with the pin? iv tried a MOSC and Funcard4 but no joy. in the tech stuff menu card status is OK (does that mean its a paired card)? i also have noticed when i go to the engineers menu that installation status page 5 says possible problems underneath it says CM lock Status (Unlocked).... also on page 9 Docsis upsteam everything is blank aprt from last locked power which is 53? Note i have a samsnug chip programmer but dont know how to use it? if needed any help would be nice? thanks...

06-06-08, 03:27 PM	#2 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,190 Thanks: 23 Thanked 189 Times in 174 Posts	Re: Sammy 2110 (problems) please help!! oes your bk start 9d 56 if so fake bk

06-06-08, 03:31 PM	#3 (permalink)
imybash Member Join Date: May 2008 Posts: 67 Thanks: 2 Thanked 8 Times in 7 Posts	Re: Sammy 2110 (problems) please help!! no bk is 5EB07FA9674D, anyhows wouldnt the box report the card as not being paired?

06-06-08, 03:38 PM	#4 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,190 Thanks: 23 Thanked 189 Times in 174 Posts	Re: Sammy 2110 (problems) please help!! double check it when you write it . also ird goes .. .. .. 3e

06-06-08, 03:39 PM	#5 (permalink)
imybash Member Join Date: May 2008 Posts: 67 Thanks: 2 Thanked 8 Times in 7 Posts	Re: Sammy 2110 (problems) please help!! have done! could it be something to do with the upstream? or the chip/netid


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

06-06-08, 03:51 PM	#6 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,190 Thanks: 23 Thanked 189 Times in 174 Posts	Re: Sammy 2110 (problems) please help!! set therites and expirey in standard tier to 21 23 then force a update on the syb by holding all 2 top buttons l r and up

06-06-08, 03:56 PM	#7 (permalink)
kian02 Member Join Date: Dec 2006 Posts: 77 Thanks: 2 Thanked 14 Times in 14 Posts	Re: Sammy 2110 (problems) please help!! think you may need to check dates on image m8 and that u used one for right area the upstream means no tb if you aint cut it then prob tw as box form dif area wont lock in your area with them __________________ What i post is for research purposes only and not to steel pay tv its ILLEGAL if iv helped in any way pleas click thanks

06-06-08, 07:51 PM	#8 (permalink)
rawsy Senior Member Join Date: May 2008 Posts: 261 Thanks: 17 Thanked 45 Times in 45 Posts	Re: Sammy 2110 (problems) please help!! the card would show up as ok if the ird was correct, the bk could still be wrong

06-06-08, 09:03 PM	#9 (permalink)
imybash Member Join Date: May 2008 Posts: 67 Thanks: 2 Thanked 8 Times in 7 Posts	Re: Sammy 2110 (problems) please help!! hmm yes i think that might be the case i have contacted the seller and she explained, that she had 2 boxes and the card could have been mixed up, but the bad thing is that the other box was also sold on ebay ! iv emailed the buyer and the seller to see if they still have access to the card? fingers crossed

07-06-08, 10:45 AM	#10 (permalink)
homer@shack Member Join Date: May 2008 Posts: 39 Thanks: 1 Thanked 3 Times in 3 Posts	Re: Sammy 2110 (problems) please help!! convert the bar code numder 104********* fron decimal to hex using windze calc in scientific mode check dec box is checked enter nunber eg. 1043617400 check the hex box and ird will be displayed, 3e345678 for the above example. if this matches the card either you or the person you got box from has messed up. if it dont hope the ebay buyer gets back to you with good news.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trouble reconnecting tb on Sammy 2110	Stevo86	Cable TV Chat	16	27-05-08 07:46 PM
Sammy 2110 stuck in update loop!	Stevo86	Cable TV Chat	8	25-05-08 02:01 PM
sammy 2110	ulfbaz	Cable TV Chat	9	17-05-08 10:57 PM
virgin media sammy 2110 weird problem	rizla83	Cable TV Chat	9	28-04-08 09:21 AM
No Sky movies on my 2110 Sammy	javed	Cable TV Chat	11	29-06-07 08:38 PM