what do i do? - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

clarkyj · 06-06-08, 08:04 PM

i am now gwtting this ????

Opening of COM2 was successful
ATR String: 3F FF 95 00 FF 91 811 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 00 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM2 was successful

what now ??

sharkbait559 · 06-06-08, 08:29 PM

You need to unlock it with an unlooper.

easyas123abc · 07-06-08, 09:06 AM

i;ve jus brought an unlooper and i also have the scripts.

This is my msg:

Opening of COM1 was successful
ATR String: &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 5A
CamID: 2C F2 E7 31
Using BD3 Key: &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Attempting to login to BD3
Reading ROM11 failed
Closing of COM1 was successful

What do I need to do next, also i was told the atmel is already flashed to ndx11.

Thanks

Steve67474 · 07-06-08, 11:26 AM

get TBCs sidewinder program and connect your unlooper then put card in and run sidewinder sit back and it should unlock. you may have to adjust trim pot to between 1a and 1f VCC. no scripts needed as this is a standalone program and works well for me

easyas123abc · 07-06-08, 11:31 AM

How do i adjust the pot all i have is the holes and it says pot.

I have the wizard unlooper, also what should the clock phase be mine is
1 = off
2 = on
3 = off
4 = off

Thanks

easyas123abc · 07-06-08, 12:50 PM

Guys... Please advice.

spikebaby · 07-06-08, 01:05 PM

2 should be on for unlooping the rest down, use the bod script, what have you flash av you used newd11x

spikebaby · 07-06-08, 01:08 PM

the pot is the little screw just above where you put the card in turn it slowly while script is running

easyas123abc · 07-06-08, 02:15 PM

Cheers spikebaby for the reply.

The flash is nxd11x... also i have been advised to use sindwinder for the bk and ird.

The screw which i turn is it clock wise or anit clock wise.
Also how much do i turn it, do i tighten all the way and slowly open or vise versa.

Cheers

06-06-08, 08:04 PM	#1 (permalink)
clarkyj Senior Member Join Date: Dec 2007 Posts: 241 Thanks: 3 Thanked 7 Times in 7 Posts	what do i do? i am now gwtting this ???? Opening of COM2 was successful ATR String: 3F FF 95 00 FF 91 811 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 44 3C ROM Revision: 011 EEPROM Revision: RevB0D SetIFS failed Using BD3 Key: 4E 69 70 00 45 72 20 49 73 20 61 20 62 75 54 74 Reading ROM11 failed Closing of COM2 was successful what now ??

06-06-08, 08:29 PM	#2 (permalink)
sharkbait559 hacker! Join Date: Feb 2008 Location: south wales Posts: 702 Thanks: 32 Thanked 53 Times in 53 Posts	Re: what do i do? You need to unlock it with an unlooper.

07-06-08, 09:06 AM	#3 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 341 Thanks: 51 Thanked 18 Times in 18 Posts	Re: what do i do? i;ve jus brought an unlooper and i also have the scripts. This is my msg: Opening of COM1 was successful ATR String: &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& ROM Revision: 011 EEPROM Revision: RevB0D ProviderID: 5A CamID: 2C F2 E7 31 Using BD3 Key: &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Attempting to login to BD3 Reading ROM11 failed Closing of COM1 was successful What do I need to do next, also i was told the atmel is already flashed to ndx11. Thanks

07-06-08, 11:26 AM	#4 (permalink)
Steve67474 Member Join Date: Jun 2008 Posts: 47 Thanks: 0 Thanked 4 Times in 4 Posts	Re: what do i do? get TBCs sidewinder program and connect your unlooper then put card in and run sidewinder sit back and it should unlock. you may have to adjust trim pot to between 1a and 1f VCC. no scripts needed as this is a standalone program and works well for me

07-06-08, 11:31 AM	#5 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 341 Thanks: 51 Thanked 18 Times in 18 Posts	Re: what do i do? How do i adjust the pot all i have is the holes and it says pot. I have the wizard unlooper, also what should the clock phase be mine is 1 = off 2 = on 3 = off 4 = off Thanks


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

07-06-08, 12:50 PM	#6 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 341 Thanks: 51 Thanked 18 Times in 18 Posts	Re: what do i do? Guys... Please advice.

07-06-08, 01:05 PM	#7 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,316 Thanks: 26 Thanked 208 Times in 190 Posts	Re: what do i do? 2 should be on for unlooping the rest down, use the bod script, what have you flash av you used newd11x

07-06-08, 01:08 PM	#8 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,316 Thanks: 26 Thanked 208 Times in 190 Posts	Re: what do i do? the pot is the little screw just above where you put the card in turn it slowly while script is running

07-06-08, 02:15 PM	#9 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 341 Thanks: 51 Thanked 18 Times in 18 Posts	Re: what do i do? Cheers spikebaby for the reply. The flash is nxd11x... also i have been advised to use sindwinder for the bk and ird. The screw which i turn is it clock wise or anit clock wise. Also how much do i turn it, do i tighten all the way and slowly open or vise versa. Cheers