help new to the site - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

Andy07111 · 12-06-08, 09:29 PM

can any 1 help me i have a eurovox max v and found its a clone and im getting peaa on the panel anything i can do 2 fix it plz

lucky13 · 12-06-08, 11:07 PM

have replied to you here Ronsters Guide To Flashing Box For Newbies

satsmo · 12-06-08, 11:38 PM

Sorry to cut in Lucky and yes I seen your relpy. PEAA means its a protection error message the guy says he has a clone he will have to reflash with the clonesafe firmware, I have seen this on many clone boxes flashed with genuine firmware. It may even require a hard boot flash with clonesafe, but it will work.

Andy07111 · 13-06-08, 01:22 AM

thay you both and do u know were i can get the clonesafe firmware from

satsmo · 13-06-08, 01:36 AM

Sorry I did not realise you said you had a Max V clone, ( read too many posts and hence the bad eyesight). What firmware revision have you tried?

Andy07111 · 13-06-08, 01:38 AM

hi ive tried to reflash using the same firmware dont really know much about the clones so i cant find any firmware

satsmo · 13-06-08, 01:50 AM

There is none for the Max V, (I thought you had a previous model), what revision date was the Kuro firmware you used? And are you sure its a clone?

I am off to bed but will look in tomorrow.

Andy07111 · 13-06-08, 01:58 AM

i used the kuro v3 10/4/08

satsmo · 13-06-08, 01:07 PM

Have you tried any pre Kuro updates. I know they dont AU but worth a try.

Andy07111 · 13-06-08, 02:18 PM

were would i find the older 1s and would they be ok

12-06-08, 09:29 PM	#1 (permalink)
Andy07111 Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 3 Thanked 0 Times in 0 Posts	help new to the site can any 1 help me i have a eurovox max v and found its a clone and im getting peaa on the panel anything i can do 2 fix it plz

12-06-08, 11:07 PM	#2 (permalink)
lucky13 LOOK-KEY 13!!!! Join Date: Jun 2007 Posts: 2,000 Thanks: 11 Thanked 439 Times in 372 Posts	Re: help new to the site have replied to you here Ronsters Guide To Flashing Box For Newbies __________________ Every forum has rules - read them to know them!

12-06-08, 11:38 PM	#3 (permalink)
satsmo Senior Member Join Date: Sep 2007 Posts: 1,191 Thanks: 11 Thanked 227 Times in 208 Posts	Re: help new to the site Sorry to cut in Lucky and yes I seen your relpy. PEAA means its a protection error message the guy says he has a clone he will have to reflash with the clonesafe firmware, I have seen this on many clone boxes flashed with genuine firmware. It may even require a hard boot flash with clonesafe, but it will work. Last edited by satsmo; 13-06-08 at 01:34 AM.

13-06-08, 01:22 AM	#4 (permalink)
Andy07111 Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 3 Thanked 0 Times in 0 Posts	Re: help new to the site thay you both and do u know were i can get the clonesafe firmware from

13-06-08, 01:36 AM	#5 (permalink)
satsmo Senior Member Join Date: Sep 2007 Posts: 1,191 Thanks: 11 Thanked 227 Times in 208 Posts	Re: help new to the site Sorry I did not realise you said you had a Max V clone, ( read too many posts and hence the bad eyesight). What firmware revision have you tried?


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

13-06-08, 01:38 AM	#6 (permalink)
Andy07111 Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 3 Thanked 0 Times in 0 Posts	Re: help new to the site hi ive tried to reflash using the same firmware dont really know much about the clones so i cant find any firmware

13-06-08, 01:50 AM	#7 (permalink)
satsmo Senior Member Join Date: Sep 2007 Posts: 1,191 Thanks: 11 Thanked 227 Times in 208 Posts	Re: help new to the site There is none for the Max V, (I thought you had a previous model), what revision date was the Kuro firmware you used? And are you sure its a clone? I am off to bed but will look in tomorrow.

13-06-08, 01:58 AM	#8 (permalink)
Andy07111 Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 3 Thanked 0 Times in 0 Posts	Re: help new to the site i used the kuro v3 10/4/08

13-06-08, 01:07 PM	#9 (permalink)
satsmo Senior Member Join Date: Sep 2007 Posts: 1,191 Thanks: 11 Thanked 227 Times in 208 Posts	Re: help new to the site Have you tried any pre Kuro updates. I know they dont AU but worth a try.

13-06-08, 02:18 PM	#10 (permalink)
Andy07111 Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 3 Thanked 0 Times in 0 Posts	Re: help new to the site were would i find the older 1s and would they be ok

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changes to front of site	brian	Site Announcements & Feedback	5	02-05-08 09:13 AM
Potential Site Changes	brian	Site Announcements & Feedback	2	14-07-07 06:48 PM
Site redesign	brian	Site Announcements & Feedback	2	21-06-07 09:22 PM
Utilize THIS SITE!	kellijosudz	Site Announcements & Feedback	0	30-03-06 11:49 PM