Loading Problems Ss Enigma

[brin_1307]

I have flashed the nokia dbox2 with SS ENIGMA v3 it has flashed ok worked it for about a hour but then wen i tried to turn box bak on the loading screen appears then goes straight to standby, when i turn standby off the loading screen loads up again but bak to standby.

Is this because it is a dogdy image or is it an internal problem so my dbox2 is broken. Can i use DBOX IFA to reflash my box with a null cable or has my DBOX2 had it not sure if it is broken or not!!

I dont have a null cable right now but will buy one if it works.

Please Help!!

[Rodboy]

Follow my instructions in post 3 of this thread and it will bring your box back to life. Flash with a neutrino image first m8.

Easy Guide help needed

[brin_1307]

Originally Posted by Rodboy

Follow my instructions in post 3 of this thread and it will bring your box back to life. Flash with a neutrino image first m8.

Easy Guide help needed

CANT TURN BOX ON TO CONNECT VIA CROSSOVER FTP A NEUTRINO IMAGE!!!!!!!!!!

[brin_1307]

Iv Read Thread Thanx M8 Will Give It A Go Cheers Bud

[Rodboy]

Leave the box on standby then m8., Follow the instructions, you may need to try a few times but it WILL flash, it's a matter of timing !! Get the missus to do the plug pulling.

[brin_1307]

Originally Posted by Rodboy

Leave the box on standby then m8., Follow the instructions, you may need to try a few times but it WILL flash, it's a matter of timing !! Get the missus to do the plug pulling.

i get this window up with lots of setting like box ip n stuff shud i jus leave that the same m8 ( grey box after i clik ok)
btw appreciate the help thanx

[Rodboy]

Thats the dbox boot manager window. Just leave that alone, you should see some activity along the bottom bar of this screen when flashing is in progress.

Good luck

[brin_1307]

soz m8 but another problem it loads then the box turns off and nothins is happenin in dbox ifa , u know the grey window with settings in them shud i click on Start! button on that

[Rodboy]

Try switching off then on at the mains a few times to see if it kicks in. Other than that keep trying, as I said before it can take a good few tries to get it to go. Be patient mate it will flash. Also as soon as you get something on your LCD ( eg Lade Software or Flashing ) then you know your box is flashing.......wait five minutes and make sure all activity on the bottom bar of bootmanager has stopped, disconnect your network and off then on at the wall.

Keep at it mate, I know it can be a pain but you should get it to kick in after 5 or 6 attempts !!??

[brin_1307]

Originally Posted by Rodboy

Try switching off then on at the mains a few times to see if it kicks in. Other than that keep trying, as I said before it can take a good few tries to get it to go. Be patient mate it will flash. Also as soon as you get something on your LCD ( eg Lade Software or Flashing ) then you know your box is flashing.......wait five minutes and make sure all activity on the bottom bar of bootmanager has stopped, disconnect your network and off then on at the wall.

Keep at it mate, I know it can be a pain but you should get it to kick in after 5 or 6 attempts !!??

THANX M8 BUT DO I HAVE 2 PRESS START! BUTTON ON THE GREY SETTINGS WINDOW, WILL KEEP AT IT THANX ALOT