Changing Netid Problem On Pace 4000!!

[zaneleggett]

hI GUYS TRYING TO CHANGE NET ID ON PACE 4000 I HAVE DONE IT TWICE ON TWO OTHER BOXES WITH NO PROBS BUT I HAVE TWO BOXES LEFT AND SEEM TO BE SOMETHING WRONG ANY IDEAS?

I HAVE TRIED DIFFERENT CARDS?

I USE THE NETID PROGRAM TO PROGRAM THE CARD WITH A INFINITY?

CHEERS

[rizlaman]

Originally Posted by zaneleggett

hI GUYS TRYING TO CHANGE NET ID ON PACE 4000 I HAVE DONE IT TWICE ON TWO OTHER BOXES WITH NO PROBS BUT I HAVE TWO BOXES LEFT AND SEEM TO BE SOMETHING WRONG ANY IDEAS?

I HAVE TRIED DIFFERENT CARDS?

I USE THE NETID PROGRAM TO PROGRAM THE CARD WITH A INFINITY?

CHEERS

Are you shore bk is def right because it comes down to this normaly or it could be down to the way its written its got to be done in a certain way cant remember of the top of my head sure some one will help thoe.

[zaneleggett]

I use a Jtag and a pogo?

[rizlaman]

Originally Posted by zaneleggett

I use a Jtag and a pogo?

4000 dont give fake bks i dont think wats exacly is it doing wat page are you going to wen put card in engerneirs menu?

[zaneleggett]

Right i pogo'd it again and its the right bk etc

i load the menu and wait then put the card in and nothing. i try to change a few pages but doent make a difference!!

[rizlaman]

Originally Posted by zaneleggett

Right i pogo'd it again and its the right bk etc

i load the menu and wait then put the card in and nothing. i try to change a few pages but doent make a difference!!

flick down to page1 it might do it then,it must be wrong bk if it dont work.
wat version of net id maker you useing?

[zaneleggett]

Hi im using NetIDv2 i have done it now but doing exactly the same? but this time it worked? strange

thanks for your help guys

[Cupid Stunt!]

When you have your 3 files for your fun card, namely - exteeprom.hex, inteeprom.hex and your flash.hex do the following in the order explained and it will not fail my friend!

Erase the card fully, then write each file individually to the card starting with exteeprom.hex [This file may also erase card as it written].

Next write to card the inteeprom.hex.

Then your flash.hex

NOW THE IMPORTANT BIT:

When writing the flash to the card, it's more than likely corrupted the inteeprom.hex file [on the card]. So... now rewrite to the card the inteeprom.hex.

So then, 3 files and written to the card individually starting with exteep then inteep and then the flash, and finishing off with inteep as it may be corrupt.

Before booting box into eng/diag screen, completely power-down, pull jumper, boot into eng/diag, select screen that displays network id [at the same time you can check to make sure PIN, NetID etc... have been cleared], put jumper back on [be scareful were ya put ya pinkies - no zapping allowed], insert fun card.

If all is in order the box will re-boot/update.

When complete insert viewing card and re-boot again.

ENJOY!

If you get the same again mate, PM me. I have the no.1 tut here that will clear it up.

[zaneleggett]

Cheers Buddy thats really help full!!

whilst your there i have a pace 1000 im doing as well but i got the nagra of off it and out it into the database but no luck!!

can you help?

[Cupid Stunt!]

Have you sorted this one now mate?