samsung 2100c - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

killer07 · 19-06-08, 10:54 AM

helo cxan anyone help me ive been doing boxes jtagging, ledd simming ect but now everytime i try doing a 2100c box with jtag using bk 2.2 it just keeps say error cable disconnected can any1 help please has the bk changed.

thank you
killer

spikebaby · 19-06-08, 01:29 PM

Use Ocd Commander Or Sdt ( Samsung Debug Tool)

killer07 · 22-06-08, 01:50 PM

can you explain because the problem im having has only really started since the new update on boxes

abaaba · 22-06-08, 01:52 PM

Quote:

Originally Posted by killer07

can you explain because the problem im having has only really started since the new update on boxes

b4 u jtag first check what software ur box is there is 3.5 and 3.6 depending on which software urs on u need to get that bytes.

u also seem to have connection problem, try connecting the jtag straight to the pc with out any other cables. make sure the box is in debug mode too.

killer07 · 22-06-08, 01:56 PM

Quote:

Originally Posted by cabuukar

b4 u jtag first check what software ur box is there is 3.5 and 3.6 depending on which software urs on u need to get that bytes.

u also seem to have connection problem, try connecting the jtag straight to the pc with out any other cables. make sure the box is in debug mode too.

by bytes do you mean in bk 2.2 tool/jtag/edit config is it them in there mate also where will i get the bytes from and how do i check what software is on box

regards
killer

abaaba · 22-06-08, 02:09 PM

u can check the software by going into ingineers menu and look for softwares. the bytes u can get them here but first what software its. and in bk 2.2 tool/jtag/edit config1 and config2 is where u put the bytes.

u can get into engineers menu by holding the up and down button till u see ld:14 and let go of it

ish1965 · 23-06-08, 04:55 PM

I am trying to go to Eng menu, when holding both up & down button then putting power on, it quickley jumps from LD3 to LD20 then get stuck there.

thanks in advance

spikebaby · 23-06-08, 05:01 PM

Quote:

Originally Posted by ish1965

I am trying to go to Eng menu, when holding both up & down button then putting power on, it quickley jumps from LD3 to LD20 then get stuck there.

thanks in advance

ld 20 shows no signal coming in, you hold both buttons while plugging the electrical lead in then count to 10 let go and even without a feed in you will still get it

ish1965 · 23-06-08, 06:28 PM

no luck it stuck on Ld20 & N*L home screen, i left it for 1hr, it want change

spikebaby · 23-06-08, 06:36 PM

you hold the up and down buttons while plugging the elec lead in until ld14 appears then let go

just tried it and it still works

19-06-08, 10:54 AM	#1 (permalink)
killer07 Member Join Date: Jun 2008 Posts: 42 Thanks: 1 Thanked 3 Times in 3 Posts	samsung 2100c helo cxan anyone help me ive been doing boxes jtagging, ledd simming ect but now everytime i try doing a 2100c box with jtag using bk 2.2 it just keeps say error cable disconnected can any1 help please has the bk changed. thank you killer

19-06-08, 01:29 PM	#2 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: samsung 2100c Use Ocd Commander Or Sdt ( Samsung Debug Tool) __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.

22-06-08, 01:50 PM	#3 (permalink)
killer07 Member Join Date: Jun 2008 Posts: 42 Thanks: 1 Thanked 3 Times in 3 Posts	Re: samsung 2100c can you explain because the problem im having has only really started since the new update on boxes

22-06-08, 02:09 PM	#6 (permalink)
abaaba Senior Member Join Date: Apr 2008 Location: out of this world Posts: 1,366 Thanks: 223 Thanked 170 Times in 157 Posts	Re: samsung 2100c u can check the software by going into ingineers menu and look for softwares. the bytes u can get them here but first what software its. and in bk 2.2 tool/jtag/edit config1 and config2 is where u put the bytes. u can get into engineers menu by holding the up and down button till u see ld:14 and let go of it __________________ All info s 4educational purposes only! La liga, UCL, Kings Cup, Club World Cup, Spanish Super Cup & European Super Cup champions.

23-06-08, 04:55 PM	#7 (permalink)
ish1965 Junior Member Join Date: May 2008 Posts: 23 Thanks: 14 Thanked 0 Times in 0 Posts	Re: samsung 2100c I am trying to go to Eng menu, when holding both up & down button then putting power on, it quickley jumps from LD3 to LD20 then get stuck there. thanks in advance

23-06-08, 06:28 PM	#9 (permalink)
ish1965 Junior Member Join Date: May 2008 Posts: 23 Thanks: 14 Thanked 0 Times in 0 Posts	Re: samsung 2100c no luck it stuck on Ld20 & N*L home screen, i left it for 1hr, it want change

23-06-08, 06:36 PM	#10 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: samsung 2100c you hold the up and down buttons while plugging the elec lead in until ld14 appears then let go just tried it and it still works __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.