pace 1000 resetting pin, i dont know the pin

[sassbs11]

Hi bro's again well remember that box you helped me out with i dont know the pin, i read through some tut and it seems you can do it by nagraedit but i cant get nagraedit to work on my card as some of you already know,
so my question is how can i get or reset my pin number on my pace 1000?

p.s. xncs also doesnt work on my card

[i did it]

you do not set pin in nagra m80
reset the box ( pull jumper ) then set the pin in em and do the id if in pure id will auto set if not use a fun to do it

[afcwomble]

Originally Posted by sassbs11

Hi bro's again well remember that box you helped me out with i dont know the pin, i read through some tut and it seems you can do it by nagraedit but i cant get nagraedit to work on my card as some of you already know,
so my question is how can i get or reset my pin number on my pace 1000?

p.s. xncs also doesnt work on my card

Try the default PIN 0000 or 1234 and see if that gets you in(if it's set?)If not go into eng menu and look on page 1 where PIN is-if its ---- you can navigate down and set it there to what you want-if it's **** then it has been set. You can clear it by pulling red jumper for 30 secs and replacing-you will have to set Def Freq for your area and then do NetID and PIN with Funcard (or Atmega) setter or use libby connected via cable.

[sassbs11]

Originally Posted by afcwomble

Try the default PIN 0000 or 1234 and see if that gets you in(if it's set?)If not go into eng menu and look on page 1 where PIN is-if its ---- you can navigate down and set it there to what you want-if it's **** then it has been set. You can clear it by pulling red jumper for 30 secs and replacing-you will have to set Def Freq for your area and then do NetID and PIN with Funcard (or Atmega) setter or use libby connected via cable.

How do i set the net id and def freq? is it through nagra edit? because i cant get that to work, i have usb infinity could i do it through that?

[sal]

you can set the freq in eng menu with the remote but,only after you reset it,just pull the red jumper off the motherboard,its near the battery,pull it off for 10secs then put it back on.if you cant set netid with card or if your not in an area where it will do it when connected to cable (tw is an area where you cant set netid automaticaly with the cable line,so is c&w if i am not mistaken) then libby is the only other way,you just need a rs232 cable to connect the box to your pc.