Samsung 2100 Newbie Question - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

Quantumkev · 25-06-08, 08:29 PM

Hi this is my first post. I am a total novice but am really interested in learning.

I previously bought a modded samsung 2100c. It then stopped working. Unfortunately I have lost the contact of the guy who set it up for me.

Underneath the box he has written on a label 3 seperate codes.
they are as follows:
a 16 digit alpha numeric code, an 8 digit alpha numeric code and a 4 digit code (the 4 digit i presume is the pin number)

It alreadu has a veiwing card in it. So my question is this. What equipment would I need in order for me to be able to get my box working again? The current state is that when i boot it up it keeps telling me that my card is not inserted properley.

Sorry if this answer has been answered anywhere else.

Thanks guys

spikebaby · 25-06-08, 08:33 PM

Quote:

Originally Posted by Quantumkev

Hi this is my first post. I am a total novice but am really interested in learning.

I previously bought a modded samsung 2100c. It then stopped working. Unfortunately I have lost the contact of the guy who set it up for me.

Underneath the box he has written on a label 3 seperate codes.
they are as follows:
a 16 digit alpha numeric code, an 8 digit alpha numeric code and a 4 digit code (the 4 digit i presume is the pin number)

It alreadu has a veiwing card in it. So my question is this. What equipment would I need in order for me to be able to get my box working again? The current state is that when i boot it up it keeps telling me that my card is not inserted properley.

Sorry if this answer has been answered anywhere else.

Thanks guys

firstly is your card inserted properly that is chip facing down....

and all you would need equipment wise is a infinity programmer ...and the rest is free ( well the information )

Quantumkev · 25-06-08, 08:37 PM

Yes the card is inserted with the chip facing down. any advice on what the codes are that were wqritten on the back of the box?

thanks the quick reply by the way

spikebaby · 25-06-08, 08:42 PM

the codes are the bk and ird these are required to pair rthe card to the stb, and when programmed on to the right image will open up the world of free tv

abaaba · 26-06-08, 06:09 AM

m8 get ur self a programmer and u r up running, 16 alpha numeric is the bk code 8 digit alpha numeris is IRD those are verry important number look after them.

freaky123 · 26-06-08, 06:06 PM

Theres a funcard tut in the downloads section m8

Quantumkev · 27-06-08, 11:23 PM

Hey guys,

After reading all threads, I was convinced that the guy who modded my box had NOT cut the talkback.
Read all threads and found that in the settings > technical stuff menu it stated that the dhcp retrun path was ON (hence the talkback had not been cut)
So found the 2 resistors and popped them off. Went back to the settings menu and low and behold, the return path was OFF. Hurrah
I geuss this is why my box has never really worked.

I've ordered my programmer so will wait and see if I'm successful in sorting my box once an for all.

Cheers for all the help so far guys

Quantumkev · 28-06-08, 02:19 PM

The saga continues.....

I received my programmer this morning. But, the reader is unable to recognise the viewing card. Also when usiig nagraedit4.1 i get the following error:
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful

After reading through the other posts i have come to the conclusion that my card is probably fried / copput / knackered!!!!

Would you agree?

Just to be sure I have ordered some spare funcards.

Marc · 28-06-08, 02:47 PM

Dont jump to the conclusion the card is knackered !!! It could quite easily be the setup of the programmer,
Have you set the progger into phoenix mode?? if not then it will return the same error as above?? make sure its in phoenix mode then try again,

Marc

Quantumkev · 28-06-08, 03:10 PM

I can't find any wherein the program to change to pheonix. The programmer is just called infinity USB.

25-06-08, 08:29 PM	#1 (permalink)
Quantumkev Junior Member Join Date: Jun 2008 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Samsung 2100 Newbie Question Hi this is my first post. I am a total novice but am really interested in learning. I previously bought a modded samsung 2100c. It then stopped working. Unfortunately I have lost the contact of the guy who set it up for me. Underneath the box he has written on a label 3 seperate codes. they are as follows: a 16 digit alpha numeric code, an 8 digit alpha numeric code and a 4 digit code (the 4 digit i presume is the pin number) It alreadu has a veiwing card in it. So my question is this. What equipment would I need in order for me to be able to get my box working again? The current state is that when i boot it up it keeps telling me that my card is not inserted properley. Sorry if this answer has been answered anywhere else. Thanks guys

25-06-08, 08:37 PM	#3 (permalink)
Quantumkev Junior Member Join Date: Jun 2008 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung 2100 Newbie Question Yes the card is inserted with the chip facing down. any advice on what the codes are that were wqritten on the back of the box? thanks the quick reply by the way

25-06-08, 08:42 PM	#4 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,339 Thanks: 27 Thanked 211 Times in 191 Posts	Re: Samsung 2100 Newbie Question the codes are the bk and ird these are required to pair rthe card to the stb, and when programmed on to the right image will open up the world of free tv __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.

26-06-08, 06:09 AM	#5 (permalink)
abaaba Senior Member Join Date: Apr 2008 Location: in front of the PC Posts: 653 Thanks: 94 Thanked 68 Times in 64 Posts	Re: Samsung 2100 Newbie Question m8 get ur self a programmer and u r up running, 16 alpha numeric is the bk code 8 digit alpha numeris is IRD those are verry important number look after them. __________________ All info is for educational!!!

26-06-08, 06:06 PM	#6 (permalink)
freaky123 Member Join Date: May 2008 Location: Midlands Posts: 37 Thanks: 0 Thanked 2 Times in 2 Posts	Re: Samsung 2100 Newbie Question Theres a funcard tut in the downloads section m8


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

27-06-08, 11:23 PM	#7 (permalink)
Quantumkev Junior Member Join Date: Jun 2008 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung 2100 Newbie Question Hey guys, After reading all threads, I was convinced that the guy who modded my box had NOT cut the talkback. Read all threads and found that in the settings > technical stuff menu it stated that the dhcp retrun path was ON (hence the talkback had not been cut) So found the 2 resistors and popped them off. Went back to the settings menu and low and behold, the return path was OFF. Hurrah I geuss this is why my box has never really worked. I've ordered my programmer so will wait and see if I'm successful in sorting my box once an for all. Cheers for all the help so far guys

28-06-08, 02:19 PM	#8 (permalink)
Quantumkev Junior Member Join Date: Jun 2008 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung 2100 Newbie Question The saga continues..... I received my programmer this morning. But, the reader is unable to recognise the viewing card. Also when usiig nagraedit4.1 i get the following error: Opening of COM1 was successful Reset failed Error reseting card, ATR string invalid Closing of COM1 was successful After reading through the other posts i have come to the conclusion that my card is probably fried / copput / knackered!!!! Would you agree? Just to be sure I have ordered some spare funcards.

28-06-08, 02:47 PM	#9 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 603 Thanks: 10 Thanked 154 Times in 127 Posts	Re: Samsung 2100 Newbie Question Dont jump to the conclusion the card is knackered !!! It could quite easily be the setup of the programmer, Have you set the progger into phoenix mode?? if not then it will return the same error as above?? make sure its in phoenix mode then try again, Marc

28-06-08, 03:10 PM	#10 (permalink)
Quantumkev Junior Member Join Date: Jun 2008 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung 2100 Newbie Question I can't find any wherein the program to change to pheonix. The programmer is just called infinity USB.