unlooping

[sharkbait559]

i keep getting timeout errors with w.e andtried changing rec timeout but still nothin , earlier it read for a while then had a reading error, can anyone help and is sidewinder just for powersync?

[reddiesel]

Originally Posted by sharkbait559

i keep getting timeout errors with w.e andtried changing rec timeout but still nothin , earlier it read for a while then had a reading error, can anyone help and is sidewinder just for powersync?

Your settings must be wrong, what script are you using and what rev is card ?
I think sidewinder was designed for powersync, i have tried it on my T911 and it runs ok but didnt seem to be much success, mike data is the one i mainly use.

[sharkbait559]

Tried mikedata and bod script and reads getting cam id for log file them timeout from 2a command.

the cards a rom 11 bod

[sharkbait559]

and when i did try sidewinder it said the card was unlocked but when i read it in nagra>>>>nothing.

how do you run vcc?

[reddiesel]

Originally Posted by sharkbait559

and when i did try sidewinder it said the card was unlocked but when i read it in nagra>>>>nothing.

how do you run vcc?

Just run it in winex like a script, adjust to get straight ------ at the vc you want, there is a tut with it.

[sharkbait559]

but when i try to run it i get the same error with any other script i run?

[sharkbait559]

IT says its unlocked now but when i read it in nagra it says reading ifs ailed and reading rom 11 failed like usual, this is what it says in win exploror>>>>>
TRYING NEW DELAY....
G/D = 0096
G/T = 9
VCC = 05 The Pot setting = 0.09278
Hits = 2424
Script Running Time 0 Hrs:4 Min:14 Sec
Modified by MIKEDATA (MAY 2007)
---------++-+-++--+--++++-+-+-+++++Hit05/06-+----+--+-+-+++-+-+--+--+--+-+---++-+-+---++--+--+-++++--+--+-+---Hit04/06-+++--++-Hit04/08+--++--+--+-----------++-+++++-----+++-Hit03/08-+--+++-++++++--+++++--+---+--+++-+-----+---+--+----+Hit03/06++++++------++--++-+++++--+-++++++-+-++++-+--+-+--++---+---+-+++--++-++--+--+-----++--++-+---+---+-+-+-++-+-+++--+++-++--+-+--++-++-----+++++--+---+++---+--+++---++-++++-+-----+-+++-++-+++-+++-++-

TRYING NEW DELAY....
G/D = 0097
G/T = 9
VCC = 04 The Pot setting = 0.08438
Hits = 2828
Script Running Time 0 Hrs:5 Min:3 Sec
Modified by MIKEDATA (MAY 2007)
--+--+----90Yes
================================================== =======
BootLoader 90 00 RSP Received!!
Your 5401 Rom 11 RevB0D should now be unlocked.
Your IRD Is:3E******
Hackable.cc and DigitalWorldz.com And wizardmods.co.uk
Flash= ????.
VCC= 03(~6.75764705882308E-02 Vdc)
Glitch Type=08
Glitch Delay= 0097
Started Glitching At 3:00:48 PM 6/28/2008
Glitched Card At 3:07:04 PM On The 6/28/2008
================================================== =======
Done In 0:6:15
After
2838 Hits
This Is Original A86 & B0D Script Modified By MIKEDATA
================================================== =======
Script C:\DOCUME~1\luke\LOCALS~1\Temp\Rar$DR00.117\MIKEDA TA & CHARTMAN A86 AND BOD SCRIPT MAY 2007 A86.xvb Transmission Completed

[sharkbait559]

can you read the card in the unlooper because im taking it out and reading it in the progger?

[Marc]

No you cannot read the card in the unlooper you must read it in the programmer

Marc

[sharkbait559]

ive got 2 rom 11 BOD's and same thing happens , it says its unlooped but it isnt when i read it in nagra.

anyone got any theories?