Eurovox Max V 2008 - Dead Box! JTag? PLEASE HELP!!!!

[damienc]

Originally Posted by HONCHO

is the box a clone

is there any error messages on display

do you have a parrell port on pc and all files needed yes ?

yes as far as i know its a cloned box there was a message on the screen just b4 it went of cant remember what it said now and yes i have a parrell port ive bought a jtag it can with a disc but i donno how to do it

will the jtag bring it back to life?? thanks

[HONCHO]

yeah it should do m8 search youtube with warzeuwant as keyword there is a video tut on there on what to do also you will need to open the box and check what chip is in it intell or st to find out what prog to use when jtaging

[damienc]

Originally Posted by HONCHO

yeah it should do m8 search youtube with warzeuwant as keyword there is a video tut on there on what to do also you will need to open the box and check what chip is in it intell or st to find out what prog to use when jtaging

im not to good at this kinda thing so how do i know what chip set i have now im gonna sound stupid here lol but how do i jtag it do i put the 9pin cable from the pc in to the back of the eurovox? or do i need to take it from pc to the jtag thing? sorry if i sound silly but i dont have a clue what im doing lol

[HONCHO]

ok m8 u need todo this

REPAIR Eurovox Max V Black TSOP

Connect JTAG and Power up EuroVox

Start JKEYS

Click on "Development Panel"
Click OK to ingore the warning.

** SEE BELOW IF YOU GET AN ERROR HERE **

If all goes well you will get into the development panel.

In the user functions box:

Type in the address: 80000000
Click on "Load to . . ."

Select the file "unlock_28FxxxC3.bin"

Click "Trigger User"

Close the current window.

Click on "Flash Programming"

Choose the model number as: DXD426RD (1 Chip-GLA)


In the section on the right:

Leave the box above set to "Full"

Click "Erase"

Select YES. This will take a minute to erase.

Click on "Program"

Select YES to "Program at address 0x7FE00000, size 0x200000?"

Choose your TSOP file

Sit and wait for OK to become active, then click it.

Close JKEYS and power the box down.

Disconnect your JTAG

Power the box on. If all has gone well then it should boot up ready for you to rescan for your channels.




*** If you get an error trying to get into the devleopment windows ****

Power the box down and run SkyMax v2.2
Power the box up
Press start.

This seems to reset the box when JKEYS cannot connect (DCU errors).

Close SkyMax and start JKEYS and try again.

[damienc]

Originally Posted by HONCHO

ok m8 u need todo this

REPAIR Eurovox Max V Black TSOP

Connect JTAG and Power up EuroVox

Start JKEYS

Click on "Development Panel"
Click OK to ingore the warning.

** SEE BELOW IF YOU GET AN ERROR HERE **

If all goes well you will get into the development panel.

In the user functions box:

Type in the address: 80000000
Click on "Load to . . ."

Select the file "unlock_28FxxxC3.bin"

Click "Trigger User"

Close the current window.

Click on "Flash Programming"

Choose the model number as: DXD426RD (1 Chip-GLA)


In the section on the right:

Leave the box above set to "Full"

Click "Erase"

Select YES. This will take a minute to erase.

Click on "Program"

Select YES to "Program at address 0x7FE00000, size 0x200000?"

Choose your TSOP file

Sit and wait for OK to become active, then click it.

Close JKEYS and power the box down.

Disconnect your JTAG

Power the box on. If all has gone well then it should boot up ready for you to rescan for your channels.




*** If you get an error trying to get into the devleopment windows ****

Power the box down and run SkyMax v2.2
Power the box up
Press start.

This seems to reset the box when JKEYS cannot connect (DCU errors).

Close SkyMax and start JKEYS and try again.

i cant power the box up there is no power in it its dead no lights nothing sorry if im being thick here lol but does the lead go from the pc to the jtag or in the back of the box thanks

[HONCHO]

for a jtag you need a parrelell port opn the pc or lappy m8 then you connect the jtag to pc and also eurovox via the headers on main board and finaly the ground clip then you are set to go

[damienc]

Originally Posted by HONCHO

for a jtag you need a parrelell port opn the pc or lappy m8 then you connect the jtag to pc and also eurovox via the headers on main board and finaly the ground clip then you are set to go

ok you say power up the eurovox but there is no power in it????what do i do

also where are the jkeys where can i find them

cant your just get a taxi and come do it for me lol

[damienc]

just wanna thanks every1 who tryed to help me i finaly got the box up and running today im happy again now lol

thanks