how to use libby - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

spikebaby · 07-07-08, 06:41 PM

How To Use Libby

Turn on pc and get the box somewhere near you but NOT plugged in at all.
Open Libdebug (Libby) and load the correct config (cfg) file for your box making sure that the config file is pre programmed with the correct net id for your area.
Plug the lead from your pc into the rs232 socket of the box, this will be a scart lead if your box is a 4000. DO NOT APPLY POWER TO BOX YET.
Now click "Execute command" in the libby window.
Quickly apply power to the cable box. After a few seconds you should see a load of data appear in the bottom right window of Libby.
Look in the top left (white) window of libby and scroll down to NET ID, click the + sign to the left of it and then look for your area.
Double click on your area and some data will appear in the top right window of libby, double click the area again.
At this point you could reset the pin on your box if you do not know it, just double click "clear sram" in the top left window of libby.
Exit Libby and plug in the cable feed e.t.c and go straight to engineers menu to check that NET ID has changed. Whilst there you should enter a new pin if you cleared sram. If the net id is not the one required Just run through the process again as sometimes you need to do it twice.

HOW TO EDIT A LIBBY CONFIG FILE

If you need to edit Libby with the correct NET I.D for your area then here's how to do it.

Download the correct config (cfg) file for your model of box.
Right click on the downloaded file and select "open with" then click notepad.
Scroll down the opened file until you see:

:Network ID
Set Network ID
4061*****
Set Network ID
4061*****
The * represent the net id so just delete the last 5 digits and replace them with your own NET I.D.
Click FILE in the top left corner and select "save as"
In the filename box call the file whatever you like but make sure that you add .cfg to the end of the filename so it might look like 2000.cfg
In the "save as file type" box be sure to change this from text documents to "all files", now hit the save button and save it where you can find it.
Open the Libby programme and load your file.
big thanks to boss for this tut

cabuukar · 07-07-08, 10:06 PM

thanks spikebaby but what boxes can u set the netid using libby, is it all, or some certain boxes.

cheers M8

ouzi1212 · 07-07-08, 10:07 PM

boxes that have an rs 232 port at the back, like pace 1000s, 2000s & 4001s.

spikebaby · 07-07-08, 10:17 PM

1000,,2000 1000b

4000 you can still use libby but you need a scart to seriel lead as well

cabuukar · 07-07-08, 10:21 PM

Sorry am little bit thick here, but do i need both rs 232 & scart to seriel lead. and also is it 4000 and 4001.

I got di4001n can i reset the netid using libby.

reddiesel · 07-07-08, 11:22 PM

Quote:

Originally Posted by cabuukar

Sorry am little bit thick here, but do i need both rs 232 & scart to seriel lead. and also is it 4000 and 4001.

I got di4001n can i reset the netid using libby.

You can but you shouldnt need to with 4001 it sets its own net id.

reddiesel · 08-07-08, 01:10 AM

Another good post spike made a sticky.

AyeRight · 03-08-08, 05:44 PM

Quote:

Originally Posted by reddiesel

You can but you shouldnt need to with 4001 it sets its own net id.

I have the DI4001N model and am getting an Er20 error any ideas on how to remedy this?

Thanks,

AyeRight

07-07-08, 10:06 PM	#2 (permalink)
cabuukar Senior Member Join Date: Apr 2008 Location: in front of the PC Posts: 371 Thanks: 61 Thanked 49 Times in 48 Posts	Re: how to use libby thanks spikebaby but what boxes can u set the netid using libby, is it all, or some certain boxes. cheers M8 __________________ NOTHIN S FREE UNLESS!!!!!!!

07-07-08, 10:07 PM	#3 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 799 Thanks: 6 Thanked 165 Times in 161 Posts	Re: how to use libby boxes that have an rs 232 port at the back, like pace 1000s, 2000s & 4001s.

07-07-08, 10:17 PM	#4 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,137 Thanks: 22 Thanked 183 Times in 168 Posts	Re: how to use libby 1000,,2000 1000b 4000 you can still use libby but you need a scart to seriel lead as well __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.

07-07-08, 10:21 PM	#5 (permalink)
cabuukar Senior Member Join Date: Apr 2008 Location: in front of the PC Posts: 371 Thanks: 61 Thanked 49 Times in 48 Posts	Re: how to use libby Sorry am little bit thick here, but do i need both rs 232 & scart to seriel lead. and also is it 4000 and 4001. I got di4001n can i reset the netid using libby. __________________ NOTHIN S FREE UNLESS!!!!!!!

08-07-08, 01:10 AM	#7 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,848 Thanks: 32 Thanked 234 Times in 221 Posts	Re: how to use libby Another good post spike made a sticky.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
libby software	ulfbaz	Cable TV Chat	2	21-05-08 05:18 PM
as anyone got the libby 1000 files	mickstar12	Other Cable Boxes	0	20-05-08 07:56 PM
net id using libby	fez	Cable TV Chat	5	19-04-08 01:48 PM
Libby + Com Port Help PLZ	faisalpandu	Cable TV Chat	9	24-01-08 03:48 PM
sa4000 and ditv2000 libby questions	atlas2l8v	Cable TV Chat	1	05-12-07 02:34 AM