Serious help needed flashing max v box

[littlemadams]

i have just had my box flashed and have gone through the three symbol rates and autoscanned after each but I still only get a max of 50 channels when before the box was flashed I had access to 200+. Can anyone tell me what is going wrong and what I should be seeing on the nagra vision screen - should there be various codes /none r just mine? i thought I had cracked this box milarky but now am totally bamboozled Thanks

[smoggy]

Originally Posted by littlemadams

i have just had my box flashed and have gone through the three symbol rates and autoscanned after each but I still only get a max of 50 channels when before the box was flashed I had access to 200+. Can anyone tell me what is going wrong and what I should be seeing on the nagra vision screen - should there be various codes /none r just mine? i thought I had cracked this box milarky but now am totally bamboozled Thanks

I take it you didn't save a channel data file before flashing

the menu/yellow button sometimes shows no keys but if you go in the long way, Menu/Language Settings and key in 1968 twice you will see the codes

Do a factory reset menu/config/clear data and do a full powerscan on the correct symbolrate

[andybrock]

Originally Posted by littlemadams

i have just had my box flashed and have gone through the three symbol rates and autoscanned after each but I still only get a max of 50 channels when before the box was flashed I had access to 200+. Can anyone tell me what is going wrong and what I should be seeing on the nagra vision screen - should there be various codes /none r just mine? i thought I had cracked this box milarky but now am totally bamboozled Thanks

Ensure cable feed is in RF in-use adapter supplied

Turn on the box and press menu
Press the right button to highlight CONFIG.
Use the down arrow to highlight CLEAR DATA.
Press OK and when asked for PIN enter 1004.(Or 0000)
Use the down button to highlight FACTORY DEFAULT and press OK on the remote control.
Select 1 for V**** /T******t or 2 for V*****/N** and press OK twice.
Press the right arrow to select FULL SCAN and press OK on the remote control.
Wait until all channels have been founds,can take a while.

regarding EMM Capture and Emulation for Eurovox
These 2 options come up when you type in 1968 twice in the language settings
I believe both need enabling?Could some one confirm?

[Bandit1.3]

Hi i have just notice that craige you say you leave the box in standby it needs to be turned on for the pc to see it not on standby so power the box up it should find it hope read this right .

[jaysbee666]

Ensure cable feed is in RF in-use adapter supplied

Turn on the box and press menu
Press the right button to highlight CONFIG.
Use the down arrow to highlight CLEAR DATA.
Press OK and when asked for PIN enter 1004.(Or 0000)
Use the down button to highlight FACTORY DEFAULT and press OK on the remote control.
Select 1 for V**** /T******t or 2 for V*****/N** and press OK twice.
Press the right arrow to select FULL SCAN and press OK on the remote control.
Wait until all channels have been founds,can take a while.

regarding EMM Capture and Emulation for Eurovox
These 2 options come up when you type in 1968 twice in the language settings
I believe both need enabling?Could some one confirm?

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>



Yes both EMM Capture and Emulation need enabling...jay.............. Ps above work was provided by AndyBrock

[andybrock]

Originally Posted by jaysbee666

Ensure cable feed is in RF in-use adapter supplied

Turn on the box and press menu
Press the right button to highlight CONFIG.
Use the down arrow to highlight CLEAR DATA.
Press OK and when asked for PIN enter 1004.(Or 0000)
Use the down button to highlight FACTORY DEFAULT and press OK on the remote control.
Select 1 for V**** /T******t or 2 for V*****/N** and press OK twice.
Press the right arrow to select FULL SCAN and press OK on the remote control.
Wait until all channels have been founds,can take a while.

regarding EMM Capture and Emulation for Eurovox
These 2 options come up when you type in 1968 twice in the language settings
I believe both need enabling?Could some one confirm?

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>



Yes both EMM Capture and Emulation need enabling...jay.............. Ps above work was provided by AndyBrock

Thanks for confirming Jay

[satsmo]

Why does EMM need to be enabled?

[stevenpc]

Originally Posted by satsmo

Why does EMM need to be enabled?

emm or emmulator does what a card with keys does if its not activated the box is a freeview box

[hairyleaf]

Ehh, perhaps I'm reading this wrong but in step 1 you say you are connecting the box to the PC and leaving in standby, why are you leaving it in standby? It needs to be on before you run the program. It will go through a downloading stage and finally a writing stage, wait till you get the downloading successful message Then set up your box to your TV and cable feed.
Then do a Fast Install from the Menu