wellon vp 280 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

big up · 16-07-08, 04:06 PM

can someone please tell me how to read the box key out off pace 2000 box i got the both atmels out off the box how do i read it now need someones help

sal · 16-07-08, 06:36 PM

if you got a willem programmer that cant take the tsop directly then you will need to buy a zif adaptor that will fit it.usualy willem programmers are supplied with programme used to read the chip on the pc.

heres what the zif adaptor looks like:Item number: 220255852200 just type the number into ebay search.

they are tsop48

i use a willem programmer but,i use it for tsop32 which is the epprom chip inside the hitachi drives supplied in xbox360.

yoiu can read the hex in the programmes buffer but,thee are tutorials around that cover what you should look for.

also i think you have to resolder them back on.

big up · 16-07-08, 06:43 PM

i got the wellon vp 280 with 48pin adaptor and am trying to read atmel chip from pace 2000 box how do i set it up to read atmel chip for bk

big up · 16-07-08, 07:15 PM

yes i no resoldering them back will be a pain but i need the bk first

Sgt. Bilko · 17-07-08, 12:36 AM

Hello big up, have you sussed the reading of the Atmels yet?

I can't help with the Wellon programmer but hopefully once you have the software for it installed then it should just be a case of selecting the device (probably AT49LV1614) from the menus and pressing the read button. Can't be as difficult as with the Willem as it does not seem to have any dip switches or jumpers to connect...but I might be wrong.

Once you have successfully read both chips, they should be 2mb each I think, then read my thread about the 2000 tsop's from a few days ago and that should get your IRD and BK.

Would be interested to know how you get on with the Wellon...I can read them no probs with Willem but cannot seem to successfully erase or program them

More tinkering required perhaps or just faulty chips.

Bilko.

big up · 17-07-08, 01:49 AM

for some reason am haveing problem with this programmer it saying that the atmel chip not sitting propely so i tryed the second chip it show the same and the legs are same to so must be something wrong with the programmer

16-07-08, 04:06 PM	#1 (permalink)
big up Senior Member Join Date: Apr 2007 Posts: 222 Thanks: 5 Thanked 3 Times in 3 Posts	wellon vp 280 can someone please tell me how to read the box key out off pace 2000 box i got the both atmels out off the box how do i read it now need someones help

16-07-08, 06:36 PM	#2 (permalink)
sal xbox360 modder Join Date: Mar 2008 Location: bradford west yorkshire Posts: 199 Thanks: 12 Thanked 13 Times in 13 Posts	Re: wellon vp 280 if you got a willem programmer that cant take the tsop directly then you will need to buy a zif adaptor that will fit it.usualy willem programmers are supplied with programme used to read the chip on the pc. heres what the zif adaptor looks like:Item number: 220255852200 just type the number into ebay search. they are tsop48 i use a willem programmer but,i use it for tsop32 which is the epprom chip inside the hitachi drives supplied in xbox360. yoiu can read the hex in the programmes buffer but,thee are tutorials around that cover what you should look for. also i think you have to resolder them back on. Last edited by sal; 16-07-08 at 06:45 PM.

16-07-08, 06:43 PM	#3 (permalink)
big up Senior Member Join Date: Apr 2007 Posts: 222 Thanks: 5 Thanked 3 Times in 3 Posts	Re: wellon vp 280 i got the wellon vp 280 with 48pin adaptor and am trying to read atmel chip from pace 2000 box how do i set it up to read atmel chip for bk

16-07-08, 07:15 PM	#4 (permalink)
big up Senior Member Join Date: Apr 2007 Posts: 222 Thanks: 5 Thanked 3 Times in 3 Posts	Re: wellon vp 280 yes i no resoldering them back will be a pain but i need the bk first

17-07-08, 12:36 AM	#5 (permalink)
Sgt. Bilko Junior Member Join Date: May 2008 Posts: 14 Thanks: 0 Thanked 3 Times in 3 Posts	Re: wellon vp 280 Hello big up, have you sussed the reading of the Atmels yet? I can't help with the Wellon programmer but hopefully once you have the software for it installed then it should just be a case of selecting the device (probably AT49LV1614) from the menus and pressing the read button. Can't be as difficult as with the Willem as it does not seem to have any dip switches or jumpers to connect...but I might be wrong. Once you have successfully read both chips, they should be 2mb each I think, then read my thread about the 2000 tsop's from a few days ago and that should get your IRD and BK. Would be interested to know how you get on with the Wellon...I can read them no probs with Willem but cannot seem to successfully erase or program them More tinkering required perhaps or just faulty chips. Bilko.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

17-07-08, 01:49 AM	#6 (permalink)
big up Senior Member Join Date: Apr 2007 Posts: 222 Thanks: 5 Thanked 3 Times in 3 Posts	Re: wellon vp 280 for some reason am haveing problem with this programmer it saying that the atmel chip not sitting propely so i tryed the second chip it show the same and the legs are same to so must be something wrong with the programmer