TM5400 CI+ USB: message "error occured"

[vdums]

Hello,

i have buy the receiver Technomate 5400 CI+USB and when i try to record the TV on my USB stick i have the error "erro occured".
My USB stick is a 1Go Kingston.

I have try to format my USB key in FAT16 or FAT32, but in both case, the record does'nt works.

Can you help me ?
Is it my receiver which have a problem ?

Thanks a lot for your help

[reddiesel]

Originally Posted by vdums

Hello,

i have buy the receiver Technomate 5400 CI+USB and when i try to record the TV on my USB stick i have the error "erro occured".
My USB stick is a 1Go Kingston.

I have try to format my USB key in FAT16 or FAT32, but in both case, the record does'nt works.

Can you help me ?
Is it my receiver which have a problem ?

Thanks a lot for your help

You probably need to download PVR ready software from www. technomate.com and flash it to your reciever, then press usb button, scroll down to management, then in there scroll to format, press ok , then yes, then it should record.

[vdums]

thanks a lot for your answer but i don't know what it is the "PVR ready software".

I have downloaded the last firmware for the 5400 on the Technomate web site and i have upload it on my receiver but i have always the same error when i try to record on an USB key.

I search but i don't find a "PVR ready software" to download on the Technomate web site.

Can you give me most precision about this or can you give an internet link to download the rigth software.

Thanks.

[reddiesel]

It should be on the 5400+ usb download, if you have it you should have management after data transfer in the usb menu, if its just the unscrambled channels that wont record and the fta ones are ok,It should work by using the timer, try press epg on remote, press red button for timer,select event 1, go down and select a start and finish time, set record on and power off to on, then press menu and save, then it should work.
If your using darkman patch the later ones can cause this problem they recommend using earlier patch 1.08 with latest softcam keys, you can get it from alsat, you will lose some channels though.

[vdums]

In fact, my receive have the good firmwre for the USB.
I have try to record on a FTA channel and it works , but i have try another time on a crypted channel and it doesn't works.

So, i have try to record a crypted channel with a programmation (via EPG touch) but i have always the same error "error occured".

For resume, i can record a FTA channel but i can't record a crypted channel

I will try to contact Technomate support to resolve my problem.

Thank you for your help.

[muppetshow]

Hi Vdums,
I am having the same problems as yours ?
Did you get any answer from Technomate ?

Many thanks

M.

[deewee]

Originally Posted by muppetshow

Hi Vdums,
I am having the same problems as yours ?
Did you get any answer from Technomate ?

Many thanks

M.

Just checked out the forum after an absence.

If you were trying to record an encrypted channel, then that is the error message you will get. You can only record encrypted programmes if you use an earlier version of the software patch from the a*s*t website:-
http://****t.co.uk/forum/attachment....6&d=1196512990

If that is not the problem then perhaps you need to (re)format the usb stick in fat32.

[muppetshow]

Hi,
Any luck anybody with this problem ?

I have contacter Technomate from who I got I reply regarding channel list export/import but nothing else ?

Anyway to get the previous version back ? The one I had was from novembre 2007 if I a am correct.

Tx in advance for any help?


M.