pace 1000 picture freeze - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

easyas123abc · 27-07-08, 01:56 AM

Hey my sis has just got a pace 1000 and cut tk and programmed a fun card with au.

The box is well ventled and it seems to freeze on channel, when this happends the box cnt be turned off via remote or any channel change, has to be unplugged from main to reboot.

She has told me that the old stb did have a 6db foward path at the back. Which is now taken off.

Any idea what it could be...

Thanks

reddiesel · 27-07-08, 02:06 AM

Have a look in eng menu at signal, too much can be as bad as not enough, have a look also if attenuation is set to high or low in menu.

easyas123abc · 27-07-08, 08:14 AM

Thanks...

What should the signal roughly be?

Goodman · 27-07-08, 01:12 PM

Signal : Good

spikebaby · 27-07-08, 02:56 PM

put the forward path attenuater back on you may be close to the cab, or to far away...if your signal is to low you will loose the bbc channels or itv etc just black screen

tdubman · 29-07-08, 04:34 AM

change ur default freq 411.000 also the isolator may be analog take it out of line

easyas123abc · 02-08-08, 02:33 PM

Quote:

Originally Posted by Goodman

Signal : Good

Cheers...

In the eng menu on pg 13 is says on mine SNR Estimate 30.db and changes between 28 - 31 and says in green SNR OK

I'm able to change the channel freq on the same page using the channel up and down keys.

tdubman · 04-08-08, 03:55 PM

change default on page 1

Ant1942 · 05-08-08, 07:54 PM

Either use a rom10 or Rom11 or change the Rom10/Rom11 image
you use for the Ext EEProm in your FunCard.
I think that you will find that this sorts it out.
It only seems to happen in Pace box using FunCards.
Ant1942

easyas123abc · 06-08-08, 12:06 AM

Thanks would I jus go by changing the extension?

27-07-08, 01:56 AM	#1 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	pace 1000 picture freeze Hey my sis has just got a pace 1000 and cut tk and programmed a fun card with au. The box is well ventled and it seems to freeze on channel, when this happends the box cnt be turned off via remote or any channel change, has to be unplugged from main to reboot. She has told me that the old stb did have a 6db foward path at the back. Which is now taken off. Any idea what it could be... Thanks

27-07-08, 02:06 AM	#2 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,614 Thanks: 175 Thanked 949 Times in 832 Posts	Re: pace 1000 picture freeze Have a look in eng menu at signal, too much can be as bad as not enough, have a look also if attenuation is set to high or low in menu.

27-07-08, 08:14 AM	#3 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Re: pace 1000 picture freeze Thanks... What should the signal roughly be?

27-07-08, 01:12 PM	#4 (permalink)
Goodman Senior Member Join Date: Jul 2007 Posts: 270 Thanks: 18 Thanked 35 Times in 35 Posts	Re: pace 1000 picture freeze Signal : Good __________________ Sometimes one pays most for the things one gets for nothing Sooner or Later we will beat Virgin again

27-07-08, 02:56 PM	#5 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: pace 1000 picture freeze put the forward path attenuater back on you may be close to the cab, or to far away...if your signal is to low you will loose the bbc channels or itv etc just black screen __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.

29-07-08, 04:34 AM	#6 (permalink)
tdubman ipost what iknow not read Join Date: Jul 2008 Posts: 707 Thanks: 66 Thanked 129 Times in 110 Posts	Re: pace 1000 picture freeze change ur default freq 411.000 also the isolator may be analog take it out of line

04-08-08, 03:55 PM	#8 (permalink)
tdubman ipost what iknow not read Join Date: Jul 2008 Posts: 707 Thanks: 66 Thanked 129 Times in 110 Posts	Re: pace 1000 picture freeze change default on page 1

05-08-08, 07:54 PM	#9 (permalink)
Ant1942 Time Traveller Join Date: Aug 2008 Location: 3rd Rock from the Sun Posts: 31 Thanks: 0 Thanked 4 Times in 4 Posts	Re: pace 1000 picture freeze Either use a rom10 or Rom11 or change the Rom10/Rom11 image you use for the Ext EEProm in your FunCard. I think that you will find that this sorts it out. It only seems to happen in Pace box using FunCards. Ant1942

06-08-08, 12:06 AM	#10 (permalink)
easyas123abc Senior Member Join Date: May 2008 Posts: 344 Thanks: 51 Thanked 18 Times in 18 Posts	Re: pace 1000 picture freeze Thanks would I jus go by changing the extension?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how do i obtain box key from Ntl / pace 1000 / 200 / d14000n	stoneddragon	Cable TV Chat	386	01-06-10 06:13 PM
Pace Ditv 1000 stuck in 'Pace' mode	ziyu	Cable TV Chat	20	14-04-09 09:38 PM
Help with pace 1000	diyman	Cable TV Chat	14	29-03-08 10:00 PM
cutting talkback pace 1000 ditv	yelnats	Cable TV Chat	2	13-09-07 10:07 PM
Pace DiTV 1000 Phase 1b	Ciwan	Cable TV Chat	15	27-08-07 08:23 PM