unlooping touble plz help - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

sharkbait559 · 07-08-08, 08:25 PM

getting these errors in windows explorer try to unloop a rom 11 bod>>>

Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
MIKEDATA DUAL UNLOOPER AND CHARTMAN WIZARD UNLOOPER SCRIPT VER 2.0 ROM10 REV A86 AND ROM11 BOD
The Current IRD On The Card Is:9D9DCD45
===Here-We-Go-Again===
Your Vcc Should Be Set To 19 Or 1B (Around 1A Is Best)!!! For The Rev A86 Only
Start glitching 5401 Rom 11 RevB0D at 20:02:42 07/08/2008
Flash : ????, Glitch Type : 06-09
Delay : 0090, VCC : 30(~0.94118 Vdc): ---------------------------------------------------------------------------------------------------------------------------------------------------+--------------------------------------------------+------------------------------------------------+----------------------------------------------+-------------------------+--+--+-----+-+---++--++-+-+-----+----+-+-+-+--+-------+----+++-+++++++------++--++-

TRYING NEW DELAY....
G/D = 0091
G/T = 9
VCC = 01 The Pot setting = 0.01158
Hits = 404
Script Running Time 0 Hrs:0 Min:0 Sec
Modified by MIKEDATA (MAY 2007)
++---+-+++-+-+-------+++-++-++-+----++++--++--+-++-+-++-+--++---+-+++--++++--+---+----++-+--+--+++++-+---+--+-+---+-+++---++----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

TRYING NEW DELAY....
G/D = 0092
G/T = 9
VCC = FFFFFFD8 The Pot setting = -0.78362
Hits = 808
Script Running Time 0 Hrs:0 Min:20 Sec
Modified by MIKEDATA (MAY 2007)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HitFFFFFFB8/06-------------HitFFFFFFB7/08--------------------------------------HitFFFFFFB2/09-------------------------------------------------------------------------------------------------------------------------------

TRYING NEW DELAY....
G/D = 0093
G/T = 9
VCC = FFFFFFA0 The Pot setting = -1.88962
Hits = 1212
Script Running Time 0 Hrs:0 Min:42 Sec
Modified by MIKEDATA (MAY 2007)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
Script Error on Line 149
Sc.GetByte: Requested Byte Exceeds Last Read Request

and

TRYING NEW DELAY....
Glitch Delay = 00EB
VCC = FFFFFFB3
Glitch Type = 8

---RstFFFFFFB3-----------------------------------------------------------------------------------------------------------------------------------------
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
Script Error on Line 171
Sc.GetByte: Requested Byte Exceeds Last Read Request

there was more rst's on the 2nd one but it wont show it

sharkbait559 · 07-08-08, 08:38 PM

got it guys i tried mikdtata script again and it poped in 3 secs, now its got a flase bk on it, gonna need to use led sim, at least the cards open

bramleyandy · 10-08-08, 01:23 PM

is the bk stsrting 6d m8

sharkbait559 · 10-08-08, 01:27 PM

yyeah m8 i now its false because easyasabc123 told me a flase bk and it matches it, i got it ok now any used led sim

bramleyandy · 10-08-08, 03:18 PM

sound stuff m8 glad you sored

spikebaby · 10-08-08, 05:14 PM

your pot is far to low on the unlooper

sharkbait559 · 10-08-08, 08:15 PM

it still did it the 3rd time, but with false bk

jimbo · 10-08-08, 08:19 PM

outcome good anyway lol

Cupid Stunt! · 14-08-08, 01:39 PM

Dont forget to disable any antivirus software and script blocking on windows matey... I'm planning a post on the subject!

07-08-08, 08:25 PM	#1 (permalink)
sharkbait559 Technology Forums Join Date: Feb 2008 Location: Wales - Pure NTL Posts: 835 Thanks: 42 Thanked 67 Times in 65 Posts	unlooping touble plz help getting these errors in windows explorer try to unloop a rom 11 bod>>> Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script MIKEDATA DUAL UNLOOPER AND CHARTMAN WIZARD UNLOOPER SCRIPT VER 2.0 ROM10 REV A86 AND ROM11 BOD The Current IRD On The Card Is:9D9DCD45 ===Here-We-Go-Again=== Your Vcc Should Be Set To 19 Or 1B (Around 1A Is Best)!!! For The Rev A86 Only Start glitching 5401 Rom 11 RevB0D at 20:02:42 07/08/2008 Flash : ????, Glitch Type : 06-09 Delay : 0090, VCC : 30(~0.94118 Vdc): ---------------------------------------------------------------------------------------------------------------------------------------------------+--------------------------------------------------+------------------------------------------------+----------------------------------------------+-------------------------+--+--+-----+-+---++--++-+-+-----+----+-+-+-+--+-------+----+++-+++++++------++--++- TRYING NEW DELAY.... G/D = 0091 G/T = 9 VCC = 01 The Pot setting = 0.01158 Hits = 404 Script Running Time 0 Hrs:0 Min:0 Sec Modified by MIKEDATA (MAY 2007) ++---+-+++-+-+-------+++-++-++-+----++++--++--+-++-+-++-+--++---+-+++--++++--+---+----++-+--+--+++++-+---+--+-+---+-+++---++---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- TRYING NEW DELAY.... G/D = 0092 G/T = 9 VCC = FFFFFFD8 The Pot setting = -0.78362 Hits = 808 Script Running Time 0 Hrs:0 Min:20 Sec Modified by MIKEDATA (MAY 2007) -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HitFFFFFFB8/06-------------HitFFFFFFB7/08--------------------------------------HitFFFFFFB2/09------------------------------------------------------------------------------------------------------------------------------- TRYING NEW DELAY.... G/D = 0093 G/T = 9 VCC = FFFFFFA0 The Pot setting = -1.88962 Hits = 1212 Script Running Time 0 Hrs:0 Min:42 Sec Modified by MIKEDATA (MAY 2007) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script Script Error on Line 149 Sc.GetByte: Requested Byte Exceeds Last Read Request and TRYING NEW DELAY.... Glitch Delay = 00EB VCC = FFFFFFB3 Glitch Type = 8 ---RstFFFFFFB3----------------------------------------------------------------------------------------------------------------------------------------- Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script Script Error on Line 171 Sc.GetByte: Requested Byte Exceeds Last Read Request there was more rst's on the 2nd one but it wont show it

07-08-08, 08:38 PM	#2 (permalink)
sharkbait559 Technology Forums Join Date: Feb 2008 Location: Wales - Pure NTL Posts: 835 Thanks: 42 Thanked 67 Times in 65 Posts	Re: unlooping touble plz help got it guys i tried mikdtata script again and it poped in 3 secs, now its got a flase bk on it, gonna need to use led sim, at least the cards open

10-08-08, 01:23 PM	#3 (permalink)
bramleyandy Senior Member Join Date: Jan 2008 Location: leeds Posts: 392 Thanks: 43 Thanked 64 Times in 62 Posts	Re: unlooping touble plz help is the bk stsrting 6d m8

10-08-08, 01:27 PM	#4 (permalink)
sharkbait559 Technology Forums Join Date: Feb 2008 Location: Wales - Pure NTL Posts: 835 Thanks: 42 Thanked 67 Times in 65 Posts	Re: unlooping touble plz help yyeah m8 i now its false because easyasabc123 told me a flase bk and it matches it, i got it ok now any used led sim

10-08-08, 03:18 PM	#5 (permalink)
bramleyandy Senior Member Join Date: Jan 2008 Location: leeds Posts: 392 Thanks: 43 Thanked 64 Times in 62 Posts	Re: unlooping touble plz help sound stuff m8 glad you sored

10-08-08, 05:14 PM	#6 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: unlooping touble plz help your pot is far to low on the unlooper __________________ All information supplied is for educational purposes only, hacking or defrauding your cable supplier is illegal.

10-08-08, 08:15 PM	#7 (permalink)
sharkbait559 Technology Forums Join Date: Feb 2008 Location: Wales - Pure NTL Posts: 835 Thanks: 42 Thanked 67 Times in 65 Posts	Re: unlooping touble plz help it still did it the 3rd time, but with false bk

10-08-08, 08:19 PM	#8 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,008 Thanks: 254 Thanked 891 Times in 554 Posts	Re: unlooping touble plz help outcome good anyway lol __________________ i now keep copies of some posts before they are deleted, this is a private matter.

14-08-08, 01:39 PM	#9 (permalink)
Cupid Stunt! A Crank Yanker! Join Date: Apr 2008 Location: Ding-Dang-Dooo! Posts: 185 Thanks: 6 Thanked 16 Times in 16 Posts	Re: unlooping touble plz help Dont forget to disable any antivirus software and script blocking on windows matey... I'm planning a post on the subject! __________________ *Always a smile to shine you along!*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unlooping problem	takka	Cable TV Chat	15	25-07-08 04:36 PM
unlooping	sharkbait559	Cable TV Chat	33	28-06-08 09:17 PM
unlooping question	sharkbait559	Cable TV Chat	1	02-04-08 11:48 PM
Boxkeys, JTag's and unlooping...	lijl1971	Cable TV Chat	5	01-04-08 04:58 PM
unlooping	adjbeatbox	Cable TV Chat	1	09-09-07 07:06 PM