Blank screen on Laky Pro - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

ttz668 · 19-08-08, 12:58 PM

Hello

I have been using the Laky pro from it's first issue (well about 6months)

It runs fine except that when you change channels the screen is blank more often than not. Sound is always fine.
If you then go up a channel and back a few times you eventually get a picture.
It was fine at first because I was back up and running, but now it's a bit of a pain.

Anyone know of a solution to this.

it's a DBOX2.

Thanks in advance

David

humforce · 19-08-08, 01:09 PM

Quote:

Originally Posted by ttz668

Hello

I have been using the Laky pro from it's first issue (well about 6months)

It runs fine except that when you change channels the screen is blank more often than not. Sound is always fine.
If you then go up a channel and back a few times you eventually get a picture.
It was fine at first because I was back up and running, but now it's a bit of a pain.

Anyone know of a solution to this.

it's a DBOX2.

Thanks in advance

David

sounds like ucode prob try diffrent version

ttz668 · 19-08-08, 03:03 PM

Thanks for the input.

Do you mean a different version of UCODE or Laky Pro ??

David

humforce · 19-08-08, 04:28 PM

Quote:

Originally Posted by ttz668

Thanks for the input.

Do you mean a different version of UCODE or Laky Pro ??

David

ucode.

Rodboy · 19-08-08, 04:29 PM

Quote:

Originally Posted by ttz668

Thanks for the input.

Do you mean a different version of UCODE or Laky Pro ??

David

Never used this image for a while..........try pressing the blue button to see if ucode selection is in that menu structure. When you find it switch from 014 to 001A or vice versa to see if that helps.......your box will reboot after a ucode change !!

ttz668 · 19-08-08, 09:17 PM

Tried several ucodes they all give the same issue.

Anybody got any other suggestions

David

m_forit · 19-08-08, 09:36 PM

try the new image by paphosAL in the d/l section here mate its a good 1 ive used it since its been out and never had any probs mate give it a go, oh dont forget to save the emus for ur image first and the roms n keys mate gl and let us know how you get on

Rodboy · 20-08-08, 11:41 AM

AL's image is not in the downloads section on this site.

Try going into settings > driver and boot options and turn use hardware sections off.
Also in the same dbox menu make sure use spts mode is also set to off.

ttz668 · 20-08-08, 08:09 PM

I went to this screen and both items were set to off.

However i set them to On then back to off.

The problem now seems to have been resolved.

Many thanks for all your help

David

curly4393 · 25-08-08, 05:40 PM

I had same prob never really bothered me, but tried this fix and I think it's done the job

19-08-08, 12:58 PM	#1 (permalink)
ttz668 Junior Member Join Date: Aug 2008 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Blank screen on Laky Pro Hello I have been using the Laky pro from it's first issue (well about 6months) It runs fine except that when you change channels the screen is blank more often than not. Sound is always fine. If you then go up a channel and back a few times you eventually get a picture. It was fine at first because I was back up and running, but now it's a bit of a pain. Anyone know of a solution to this. it's a DBOX2. Thanks in advance David

19-08-08, 03:03 PM	#3 (permalink)
ttz668 Junior Member Join Date: Aug 2008 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Blank screen on Laky Pro Thanks for the input. Do you mean a different version of UCODE or Laky Pro ?? David

19-08-08, 09:17 PM	#6 (permalink)
ttz668 Junior Member Join Date: Aug 2008 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Blank screen on Laky Pro Tried several ucodes they all give the same issue. Anybody got any other suggestions David

19-08-08, 09:36 PM	#7 (permalink)
m_forit Senior Member Join Date: May 2008 Posts: 118 Thanks: 6 Thanked 26 Times in 23 Posts	Re: Blank screen on Laky Pro try the new image by paphosAL in the d/l section here mate its a good 1 ive used it since its been out and never had any probs mate give it a go, oh dont forget to save the emus for ur image first and the roms n keys mate gl and let us know how you get on

20-08-08, 11:41 AM	#8 (permalink)
Rodboy Senior Member Join Date: Jun 2008 Posts: 563 Thanks: 30 Thanked 133 Times in 117 Posts	Re: Blank screen on Laky Pro AL's image is not in the downloads section on this site. Try going into settings > driver and boot options and turn use hardware sections off. Also in the same dbox menu make sure use spts mode is also set to off.

20-08-08, 08:09 PM	#9 (permalink)
ttz668 Junior Member Join Date: Aug 2008 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Blank screen on Laky Pro I went to this screen and both items were set to off. However i set them to On then back to off. The problem now seems to have been resolved. Many thanks for all your help David

25-08-08, 05:40 PM	#10 (permalink)
curly4393 Member Join Date: Dec 2007 Posts: 54 Thanks: 1 Thanked 6 Times in 6 Posts	Re: Blank screen on Laky Pro I had same prob never really bothered me, but tried this fix and I think it's done the job

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blank Screen	jacka	Cable TV Chat	8	26-05-08 09:54 PM
Screen Goes Blank	DYLANBALLYER	Laptops	1	15-04-08 11:08 PM
blank screen	slacky	Cable TV Chat	22	03-12-07 07:45 PM
Never seen this before - LCD + Screen blank	naddex	DBox/Dreambox	31	28-11-07 05:18 PM
SS2 ProgDVB - Blank Screen - Why?	Jimdefruit	Satellite TV on PC	21	09-04-06 06:34 PM