Is my Rom11-bod Card fooked ?

[Roco]

Here goes , i ran my card through tiny-unlooper using a script to unlock rom11-b0ds & it was successful. I tried reading my card in nagra but i still couldnt get my bk ect. I tried unlocking again & the same thing happens.


I had a go with xncs but wasnt to sure what i was at




Now when i try to run vcc-analyser in winexplorer i get this :

Executing Script: C:\Users\roco\Desktop\mick data tiny files\Chartman VCC Analyzer v4.xvb
Can't initialize port com1:


Executing Script: C:\Users\roco\Desktop\mick data tiny files\Chartman VCC Analyzer v4.xvb
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 03 00

VCC 20: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
VCC Floor..: 00

Script C:\Users\roco\Desktop\mick data tiny files\Chartman VCC Analyzer v4.xvb Transmission Completed


Executing Script: C:\Users\roco\Desktop\mick data tiny files\Chartman VCC Analyzer v4.xvb
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 03 00

VCC 20: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
VCC Floor..: 00

Script C:\Users\roco\Desktop\mick data tiny files\Chartman VCC Analyzer v4.xvb Transmission Completed


.................................................. .................................................. ..

When i try to run the unlocker script i get this :

Card Didn't Response Correctly-Please Reset Your Dual Unlooper By The Reset Button Before Starting The Script Again,Or Your Card May Be Looped-Check In NagraEdit 4.1
Script Will Now Exit..Oh Deer

Script C:\Users\roco\Desktop\mick data tiny files\MIKEDATA & CHARTMAN BOD SCRIPTJan 2008 .xvb Transmission Completed

.................................................. .................................................. ...

When i try to read in nagra i get this :

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful


is my card fooked are still ok?

Thanks

[Roco]

What is SetIFS ?cheers

[takka]

i get the same with my tiny unlooper if anyone can help please do feels like i wasted money on somethin that dont or wont work

[reddiesel]

It looks like your vcc is way out, it should have been already set for mike data script, did you try adjusting it ?, are you sure it unlooped ? try boxget pc2 for bk, you might have to run it through mron you will lose bk though.

[Roco]

hi red i was hopeing you would be along today,fortuntly i got it sorted.
I didnt ajust the vcc,it just went like that on its own , iv ajusted it now though,lol

after everything I tried one of them chepo usb serial adapters from ebay & it read fine in nagra.

ird matches my box & boxkey starts b7 , that should be ok?

cheers mate

[reddiesel]

Originally Posted by Roco

hi red i was hopeing you would be along today,fortuntly i got it sorted.
I didnt ajust the vcc,it just went like that on its own , iv ajusted it now though,lol

after everything I tried one of them chepo usb serial adapters from ebay & it read fine in nagra.

ird matches my box & boxkey starts b7 , that should be ok?

cheers mate

Oh excellent, so the usb adapter worked, i thought they didnt, well thats a bonus, well done m8.

[Roco]

yea i was quite surprised myself , i got a port rep & pci card when all i needed was a usb adapter ,lol

I'll be back though when doing another few cards because getting the pot set is doing my head.

bed time , cya about mate

[abaaba]

am tryin to open this rom11 card my sidewinder just stucks on here.


any ideas will b appreciated.

[bramleyandy]

ive had that a few times just close the programme and open again often works for me

[abaaba]

it doesnt work 4me tried couple of times