Samsung 2110c Mosc Card help - t911 ulooper

[mancmw]

this is probably been asked before but iv read up as much as possible and really confused my self now lol so ill just post it up here and see what you all say firstly i have a samsung 2110 it has a card with it which i know is paired as i put it in on the ENG menu and it comes up green with ok. Now the part im confused on how do i get the BK i know the ird i just need the BK i have a t911 unlooper but have no idea how to use it. and a infinity usb please help me out ask me anything and ill tell u lol run through this with me Lol cheers

[reddiesel]

Originally Posted by mancmw

this is probably been asked before but iv read up as much as possible and really confused my self now lol so ill just post it up here and see what you all say firstly i have a samsung 2110 it has a card with it which i know is paired as i put it in on the ENG menu and it comes up green with ok. Now the part im confused on how do i get the BK i know the ird i just need the BK i have a t911 unlooper but have no idea how to use it. and a infinity usb please help me out ask me anything and ill tell u lol run through this with me Lol cheers

Open winexplorer and click on open script then load script, mike data script is a good one depending on revision, you can check revision with programmer in 4.1 or it will tell you when you start running the script, bod etc , if unlooper is new it will need to be flashed newd11 is good, you may need to set the vcc, vcc analyser is the one for that it has tut with it, sidewinder is an all in one programme you can use instead of winexplorer as well, you may need to alter configuration settings in winex depending on what version you have, i hope thats not too confusing, try it and let us know whats happening.

[Roco]

Red is there any plug & play unloopers which dont need pot set?


cheers

[reddiesel]

Originally Posted by Roco

Red is there any plug & play unloopers which dont need pot set?


cheers

The Tiny comes ready set up for its own version of mike data script, from fleet computer systems.
vcc isnt as hard to set up as you may think, you just turn the screw on the pot till you get the right reading with vcc analyser.

[mancmw]

k so after flashing the t911 iv moved the switches to 2 and 5 and the other switch to the right. i then open the script and i get:

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Card Didn't Reset - Please Reset Your Dual Unlooper By The Reset Button before Starting The Script Again
Script Will Now Exit...oh Dear

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 149
Sc.GetByte: Requested Byte Exceeds LAst Read Request

any ideas what im doing wrong ?

[reddiesel]

Originally Posted by mancmw

k so after flashing the t911 iv moved the switches to 2 and 5 and the other switch to the right. i then open the script and i get:

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Card Didn't Reset - Please Reset Your Dual Unlooper By The Reset Button before Starting The Script Again
Script Will Now Exit...oh Dear

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 149
Sc.GetByte: Requested Byte Exceeds LAst Read Request

any ideas what im doing wrong ?

Click on config and increase rec timeout, i use 650, click on magnifying glass to reset atr, then try it. Have you set vcc ?

[mancmw]

the person i brought the t911 said the pot was already set but i suppose i could give it a try if its easy ? i have the filefor it on here and ill give that a try thanks
ill update as sooon as i find out

[mancmw]

my vcc is set to 1a ? my card is a rom11 bod i think and i just ran the mikedata and in the box it says
Hit30/09

Should i press someting or just leave it ?

when using a different script im getting unable to identify provider ? i just re ran the mikedata and i get a pop up saying similar i know this cards works as in the box it says ok?

[reddiesel]

The mike data should open that easily, it should start running out a series of random ++++ with a few hit like you had in between, just let it run till it starts beeping and you get a yes, try in config ... rec timeout 650...byte delay 10...reset delay 100...data baud 115200...reset baud 115200...parity none....stop bits 1. make sure you have the right comm port set.

[mancmw]

im thinking the com port must be set correct as i set the vcc analyzer ? the script was running for over 24 hours now and still just said the hit number thing but before that it did say a load of pop up boxes. i stopped that and have now opened sidewinder which i dont really get do i just let it run it says:

I'm Using a flashed newd11x on the t911 i set the vcc with vcc analyzer and put the card in opened sidewinder and get:

port detector>
Detected COM:1

Loader inspector


Testing....(this is just changing from like 04 to 0a etc)

and Pink stars are apearing Is this what is supposed to happen ? im going to leave this running and see what happens