Erasing A Rom11 B09 Card Help Please

[stevier]

Hello everyone, i'm quite new to this so please bare with me!!

I have a Rom11 B09 card and can only read it so far (see below) but i have no use for the info on it and would like to reimage it, i have the 2 numbers needed on the bottom of my cable box which is my old old samsung 2100c (i own this one).

I have most of the software available and also infinity usb unlimited but am not really clued up on what to do to clean the card ready for the new info and yes i know how to set up infinity for virtual mode etc etc lol??

As i said, i already have the numbers needed for the card because i had it rechipped last year and all was well until it went off about 2 weeks ago!!

Thanking everyone in-advance and also for a GREAT WEBSITE!!

Stevier

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 82
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 82
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

[blakey_8]

ur card is locked mate. if u want more help, ill send a pm with all the info u need to do a b09? i did mine eventually and its now unlocked (without an unlooper).

[ksenghani]

use blocker remover script but that will wipe the card best way is via xncs to get bk then clean card using mrom or other tools

[pello]

m8 just glitch the card if you have a 2110 and you remove bk the box will not work use a unlooper m8 then mess about with the card .

[stevier]

Please note i don't need anything from the Rom 11 B09 card because all the info is on the bottom of the box which we have already had someone else do it for me about a year ago!! I Just need a completey clean card ready to take an image and thats the problem i have (Getting the card ready to take new image) This is all i can get from the card Using nagra 4.1:- Got This Using Infinity Usb Unlimited 2.71 Opening of COM1 was successful ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 39 41 ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 82 CamID: 00 00 00 00 Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74 Attempting to login to BD3 BD3 login failed Reading ROM11 failed Closing of COM1 was successful Opening of COM1 was successful ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 39 41 ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 54 CamID: 27 84 17 E5 Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74 Attempting to login to BD3 BackDoor login verified Dumping Dataspace Error sending BackDoor 0 EMM Write error encountered, attempting to restore original decrypt keys ProviderID: 82 CamID: 00 00 00 35 Attempting to login to BD3 BD3 login failed Error, unabled to restore decrypt keys Decrypt keys: 10 E6 78 2B E2 7A 02 E1 90 D9 CD DA 12 21 C4 56 BF 16 B8 44 85 04 CF E5 86 06 3A 58 B1 B5 D4 F9 86 5D FF 87 A7 EA 54 D1 40 7D F1 D8 B1 D1 6A 41 BA 85 6B 45 DD B7 37 1A 9A 06 0A 0A 14 E0 6E 96 39 9B AC E7 A2 CC D5 41 62 56 FF E8 29 CC 41 93 2D D5 66 C3 43 07 A1 Reading ROM11 failed Closing of COM1 was successful ATR = 3FFF9500FF918171A04700444E415350303131205265764230 3941 Eeprom revision: DNASP011 RevB09 Got This Using Infinity Usb Unlimited 2.61 Opening of COM1 was successful ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 39 41 ROM Revision: 011 EEPROM Revision: RevB09 SetIFS failed Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74 Reading ROM11 failed Closing of COM1 was successful Opening of COM1 was successful ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 39 41 ROM Revision: 011 EEPROM Revision: RevB09 ProviderID: 82 CamID: 00 00 00 00 Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74 Attempting to login to BD3 BD3 login failed Reading ROM11 failed Closing of COM1 was successful I dont need any of the info on the card, i just need a program that will wipe the card completely so that i can put a new image on it!! Also Tried mrom (2nd string failure) Tried xncs 1.8 (no atr send from card) Regards Stevier

[true_devil]

ok mate your on the right track there with mron..you just need the right delays. try 180 0 180 amd it will work. just do it a couple of times and i gurantee itll work.i unlocked many cards that way.since you dnt need the infor its perfect. try those delays and when i get home ill double check it for you.

just reset and try doing it a few times.

[mad-man]

use the bo9_a3e d2c blocker remover as said in previouse post.

[true_devil]

well to be honest mate, unless you've got the actual working script its preety useless....and the person who developed the script doesnt want it released.

[yusuf_gaz]

Originally Posted by true_devil

well to be honest mate, unless you've got the actual working script its preety useless....and the person who developed the script doesnt want it released.

Hi m8

Thats not the case it has been released, if you need it let me know.

You are on the right track, by the looks of your last try in nagra I would try to get back in with xncs go to backdoor keys and note them down or write new ones and input them when nagra asks for it.

Between mrom xncs and nagra you will get into the card as it stands now.

Regards

[stevier]

Ok, Thanks to Blakey for helping me read the card in mrom which for anyone having similar problems then i set the settings to 350, 0, 350 and it worked a treat as is below!!

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 40
CamID: 11 11 11 11
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: B6 6B 07 66 02 62 39 A6 A4 34 F6 69 50 FE 66 07
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM11 successful
Card read successfully
Efficiency: 89.4%, Packets: 141, Retries: 15, Time: 29.58s
Closing of COM1 was successful

Now in xncs 1.8 it reads:-

Unsuficient bytes for atr(5),not a nagra card.
ATR=21C10100E1
Sorry...Not Dumping card.

Any ideas anyone??, i just want to image the card thats all lol!!!

In Rom Studio 1.6i it reads:-

Ghost Not Found, Do You Want To Read The Card By Nagraedit Method? I Answer Yes and then it ask me for Login BDO Pasword?? What one do i enter please??

Thanks everyone for being so patient!!

Stevier