Go Back   Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums > Tech Forums > Digital TV > UK Cable > Cable boxes > Eurovox



Eurovox Eurovox forum for Eurovox help and support: Eurovox, Eurovox max, etc

Reply
 
LinkBack Thread Tools
Old 26-09-08, 09:30 AM   #1 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 24
Thanks: 5
Thanked 0 Times in 0 Posts
Default Wondering what to do with the wires

Hello all. Thought i would introduce myself. Im new to this forum and after being told by a friend that if i get a eurovox and a virgin media connection into my house then i could get all the channels. Over the last couple of days i have been reading through this forum and looking on ebay for the cheapest eurovox. I think i understand how to set everything up.

However, i was speaking to the parents last night and i asked them as we have a vm connection for the house have we got a white box where the wires meet on the wall.They said no, as the technician that came along shoudl have put a new box on but to save time he just run a wire into the house.

My question is. Can i still put a splitter to this single wire trhat is running into the house or would i have to call vm and get one of these boxes fitted. Where about does the splitter get used in the process?? Some sort of diagram of how the setup would look would be great if anyone has one to send me??

I hope that all of this has made sense to at least someone.

A reply would be great. Thanks.
Wayne
Wpickett is offline   Reply With Quote
Old 26-09-08, 10:00 AM   #2 (permalink)
Senior Member
 
yusuf_gaz's Avatar
 
Join Date: Sep 2008
Posts: 1,964
Thanks: 116
Thanked 623 Times in 525 Posts
Default Re: Wondering what to do with the wires

Hi

You can put a splitter on this cable and use it as long as the feed is live.

As you are saying you are going to get VM connection then they will put white box in.

Regards
yusuf_gaz is offline   Reply With Quote
Old 26-09-08, 10:07 AM   #3 (permalink)
Senior Member
 
AciidSn3ak3r's Avatar
 
Join Date: Aug 2007
Location: Leeds
Posts: 1,125
Thanks: 46
Thanked 95 Times in 84 Posts
Default Re: Wondering what to do with the wires

yusuf_gaz, he already says he's got a VM connection, they just didnt put the little white box on. I take it you have the Broadband or TV with vi**in already then?
Yeah if you just got the cable then add a splitter onto it.
But before you connect the splitter together you need to do a power scan.
This is best done with a direct connection.
So if you take the cable coming into your house and link it your Eurovox and then go through the process of doing a PowerScan (The powerscan allows you to search for the most transponders in your area) then you will be able to connect everything back up once this has finished.
Hope this helps
AciidSn3ak3r is offline   Reply With Quote
The Following User Says Thank You to AciidSn3ak3r For This Useful Post:
Wpickett (26-09-08)
Old 26-09-08, 11:02 AM   #4 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 24
Thanks: 5
Thanked 0 Times in 0 Posts
Default Re: Wondering what to do with the wires

Thanks alot guys. Yeah i already got a current connection with virgin which is the basic tv package. One last question though. I know this has probably been covered in this forum
but what do i need. I take it i would need the eurovox, a splitter and some coaxil cable??

Would you recommend the Eurovox PVR EX5000?

Thanks again.
Wayne
Wpickett is offline   Reply With Quote
Old 26-09-08, 11:23 AM   #5 (permalink)
Senior Member
 
smoggy's Avatar
 
Join Date: Apr 2008
Location: North East England
Posts: 2,780
Thanks: 240
Thanked 882 Times in 792 Posts
Default Re: Wondering what to do with the wires

the pvr model will do all what the other models do with the added option of fitting a drive to record etc.
it will get you all the channels without the hard drive but its there if need be, you have to decide if the few extra quid is worth that option.

if you have no broadband and you are having the boxes next to each other
disconnect the cable from your box and screw it to the splitter then you will need two cables with f connectors on each end both of these cables screw to the out of the splitter, one going to the Vermin box the other to the EV the one going to the EV will need a little push fit connector which normally comes with the box

EDIT : if you buy off lincsat a member of this forum he will sort you out with everything you need.

Last edited by smoggy; 26-09-08 at 11:26 AM.
smoggy is offline   Reply With Quote
Old 26-09-08, 11:29 AM   #6 (permalink)
Senior Member
 
Join Date: Jul 2008
Posts: 203
Thanks: 9
Thanked 52 Times in 43 Posts
Default Re: Wondering what to do with the wires

hi wpickett,,

be very carefull where you source your cable box from,,
it is not all about cost.
back up service,,warrenty is very important,,
and also cheap can mean CLONES!!,,suddenly that 20 quid you have saved becomes unimportant,,

will you be able to flash the eurovox with different software ok?,,as many suppliers only supply boxes with fta (free to air) software on them,,
remember you will have to learn to be able to flash the box because of future updates,,

avoid purchasing cheap splitters,,coax,,connectors as these can cause problems,,

go for rg6 (double shielded) coax should be fine,,
bumble is offline   Reply With Quote
Old 26-09-08, 01:12 PM   #7 (permalink)
Senior Member
 
AciidSn3ak3r's Avatar
 
Join Date: Aug 2007
Location: Leeds
Posts: 1,125
Thanks: 46
Thanked 95 Times in 84 Posts
Default Re: Wondering what to do with the wires

Also go for a Konig splitter. I have had them and they are still working
AciidSn3ak3r is offline   Reply With Quote
Old 26-09-08, 02:04 PM   #8 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 24
Thanks: 5
Thanked 0 Times in 0 Posts
Default Re: Wondering what to do with the wires

Hey guys. Well i have placed an orderwith Linksat. I onlypurchased the box without any hard drive first to get it working then will buy a hard drive when i get use to using it. Are linksats boxes ready to go or free to air? Sorry about all the questions. ONly knew about this about 4 days ago.

Cheers
wayne
Wpickett is offline   Reply With Quote
Old 26-09-08, 02:38 PM   #9 (permalink)
Senior Member
 
AciidSn3ak3r's Avatar
 
Join Date: Aug 2007
Location: Leeds
Posts: 1,125
Thanks: 46
Thanked 95 Times in 84 Posts
Default Re: Wondering what to do with the wires

Erm i think i read somewhere that Lincsat may put on an updated firmware if you ask him to. Drop him an eMail to find out
AciidSn3ak3r is offline   Reply With Quote
Old 26-09-08, 05:18 PM   #10 (permalink)
Member
 
Join Date: Sep 2008
Posts: 88
Thanks: 11
Thanked 1 Time in 1 Post
Default Re: Wondering what to do with the wires

What job does the white box do? Is there a difference between having one and not?
teartray is offline   Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
hi was wondering how to channel update without losing order of channels? Kiz Eurovox 2 07-08-08 11:25 PM
echostar AD3000IP WIRES jaylah Satellite Help 2 10-01-08 11:39 PM
Untidy wires everywhere Bubba.fatass Home Media 1 21-07-07 08:48 PM
GC wires Danniet Nintendo 2 30-10-06 04:24 PM
wondering default ip for sporster 1.75 ultra tam2oo5 Dreambox 0 23-09-06 03:51 AM


All times are GMT +1. The time now is 11:29 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.