Starview 4 Super USB – Cannot extend to multiple TVs using different modulator Types - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Radge10 · 28-09-08, 01:02 PM

Hi,
I have a Starview 4 Super USB and I am running extensions through my signal splitter/booster to two bedrooms in the house (using coax cable).
In the AV Output Settings I had Video Output set to “RGB” and Modulator Type set to “PAL-G”.
This worked fine for extension TV number 1 but on TV number 2 there was no sound. I changed the Modulator Type to “PAL-I” and then TV number 2 worked but there was no sound on TV number 1.
Is there any way round this? Can you change the settings on the Starview box its self or maybe change something on the extension TVs? I previously run SKY + through the same splitter/booster and both extension TVs worked fine.

videoman · 29-09-08, 12:52 PM

have you tried to retune the TV 1 to the correct sound both sets use PALI in the UK so both sets should work try retunning?

Radge10 · 29-09-08, 02:19 PM

Quote:

Originally Posted by videoman

have you tried to retune the TV 1 to the correct sound both sets use PALI in the UK so both sets should work try retunning?

I tried re-tunning but no joy at all. Only 1 fequency shows a picture.

Radge10 · 29-09-08, 11:41 PM

Videoman, I have now solved the problem. One of the TVs was configured for use in USA. Threw me a but that the same thing never happened with Sky! Cheers for your help though, you put me on the right track

28-09-08, 01:02 PM	#1 (permalink)
Radge10 Member Join Date: Sep 2008 Posts: 36 Thanks: 8 Thanked 4 Times in 4 Posts	Starview 4 Super USB – Cannot extend to multiple TVs using different modulator Types Hi, I have a Starview 4 Super USB and I am running extensions through my signal splitter/booster to two bedrooms in the house (using coax cable). In the AV Output Settings I had Video Output set to “RGB” and Modulator Type set to “PAL-G”. This worked fine for extension TV number 1 but on TV number 2 there was no sound. I changed the Modulator Type to “PAL-I” and then TV number 2 worked but there was no sound on TV number 1. Is there any way round this? Can you change the settings on the Starview box its self or maybe change something on the extension TVs? I previously run SKY + through the same splitter/booster and both extension TVs worked fine.

29-09-08, 12:52 PM	#2 (permalink)
videoman Junior Member Join Date: Jun 2008 Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Starview 4 Super USB – Cannot extend to multiple TVs using different modulator Ty have you tried to retune the TV 1 to the correct sound both sets use PALI in the UK so both sets should work try retunning?

29-09-08, 11:41 PM	#4 (permalink)
Radge10 Member Join Date: Sep 2008 Posts: 36 Thanks: 8 Thanked 4 Times in 4 Posts	Re: Starview 4 Super USB – Cannot extend to multiple TVs using different modulator Ty Videoman, I have now solved the problem. One of the TVs was configured for use in USA. Threw me a but that the same thing never happened with Sky! Cheers for your help though, you put me on the right track

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
the box super starview 3	tony allen	Starview	12	17-04-11 02:41 AM
Starview 4 Super USB – Schedule a Recording	Radge10	Starview	14	18-02-10 09:23 PM
Starview 4 super usb...!!!	grifda	Starview	10	03-11-08 03:16 PM
starview 3 super	DUG1972	Starview	6	22-09-08 04:43 PM
Starview 3 The Box Super - Clones?	trademark2k6	Starview	0	22-07-08 05:06 PM