Eurovox MaxV

[red_devil]

i have a MaxV here that wont work when i do a powerscan the Level and Quality both say 80% but the box doesnt pick up any TP's. My Eurovox Blue works with no problems so i guess there is a fault with the box anyone know what it may be?.

[lincsat]

First thing to try is to check all the connections, remove the splitter and even try copying the channel list from your Blue box to the Max V

[frankieyeha]

make sure ur putting the ariel in the rite hole.

[red_devil]

Hey guys i checked all the connections and they were fine i also copied the channel list from the Blue Box to the MaxV but every channel says No Signal even though the level and Quality both sit at 81% after about 5minutes it will say Searching for signal but nothing seems to be working. i got the box from a friend who purchased a new one after this one stopped working. he doesnt know what happened to it just that it used to work fine but one day all the channels stopped working.

[lost_boy]

What is the firmware on the box?!??

[red_devil]

The firmware on the box is Kuro V3 Final from 18/04/2008 wen i got the box it had the firmware from october 2007 on it and i thought that maybe flashing with the new software would have fixed the problem but it didnt.

[frankieyeha]

make sure ur lead goung in to ur box has no bends and kinks has to be dead str8 r it will not find a signal try holding it in when its on to see wot happens also check ur skart leads.

[redrobo197]

Are you scanning with the correct symbol rate for your provider.