haxorware 10.3 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

chef1 · 03-10-08, 03:34 AM

Got 250 today with haxorware 10.3

I cant seem to get the web interface to come up
the computer wont get an ip and when it does no web interface
do i have to telnet or something first or should it just log me straight in to the setup page

thanks Paul

666 · 03-10-08, 06:48 AM

have a look at this

666 · 03-10-08, 07:30 AM

also this,,not my work

Haxorware Settings
----------------------
Configuration:
---------------------
Settings-
General:
Factory Mode - Unticked
Disable Firmware Upgrades - Ticked
Force Network Access - Ticked
Tftp Enforce Bypass - Ticked
Disable IP Filters on Startup - Unticked
Current IP Filters Status - Optimized
Administration:
Control Panel IP Address - 192.168.100.1
DHCP Server - Ticked
Telnet Server - Unticked
Username - Root
Password - Admin
Frequency Settings:
Annex - Both
Plan - European
Preferred DS Freq 1 - 402750000 (this is for NTL, TW and others are different) i use 331000000
2 and 3 - 0
Upstream channel - dont change (will change on its own)
Addresses:
HFC MAC - Your Mac Address
Ethernet Mac - Dont touch
USB MAC - Copy your HFC MAC address, only this time change the last letter/number on it to 1 letter/number higher.
Serial Number - Dont Touch
Config File:
Server IP: Put whatever your server IP address you are using here, you can get it from DHCPforce.
Filename: Whastever you wish for your filename to use, if you want to force the 20mb option, then use - cmreg-ntlhm250-bund03.cm for NTL area, once again TW etc will be different.
Autoserve Enabled - Unticked
Stored cfg/store new config - no need to do anything here.
Baseline Privacy:
BPI - Disabled
Certificate - BPI Public Key
All the rest in the Baseline privacy section will not be touched.
And that is that, that should be everything done and you should now be able to get online.

chef1 · 03-10-08, 03:44 PM

Chears for the heads up

though my problem is that i cant access any menus to change the settings
do u think its a bad flash

toolzkit · 03-10-08, 11:41 PM

set you pc's network card to IP 192.168.100.10 & Subnet mask 250.250.250.0 and try your 192 page again, but change it back when finished.

andybr1ggs · 01-04-10, 12:15 PM

sometimes you will have this problem....can you try it in another PC.

03-10-08, 03:34 AM	#1 (permalink)
chef1 Senior Member Join Date: Aug 2007 Posts: 174 Thanks: 52 Thanked 45 Times in 41 Posts	haxorware 10.3 Got 250 today with haxorware 10.3 I cant seem to get the web interface to come up the computer wont get an ip and when it does no web interface do i have to telnet or something first or should it just log me straight in to the setup page thanks Paul

03-10-08, 07:30 AM	#3 (permalink)
666 SEARCH FFS Join Date: May 2008 Posts: 1,327 Thanks: 165 Thanked 241 Times in 192 Posts	Re: haxorware 10.3 also this,,not my work Haxorware Settings ---------------------- Configuration: --------------------- Settings- General: Factory Mode - Unticked Disable Firmware Upgrades - Ticked Force Network Access - Ticked Tftp Enforce Bypass - Ticked Disable IP Filters on Startup - Unticked Current IP Filters Status - Optimized Administration: Control Panel IP Address - 192.168.100.1 DHCP Server - Ticked Telnet Server - Unticked Username - Root Password - Admin Frequency Settings: Annex - Both Plan - European Preferred DS Freq 1 - 402750000 (this is for NTL, TW and others are different) i use 331000000 2 and 3 - 0 Upstream channel - dont change (will change on its own) Addresses: HFC MAC - Your Mac Address Ethernet Mac - Dont touch USB MAC - Copy your HFC MAC address, only this time change the last letter/number on it to 1 letter/number higher. Serial Number - Dont Touch Config File: Server IP: Put whatever your server IP address you are using here, you can get it from DHCPforce. Filename: Whastever you wish for your filename to use, if you want to force the 20mb option, then use - cmreg-ntlhm250-bund03.cm for NTL area, once again TW etc will be different. Autoserve Enabled - Unticked Stored cfg/store new config - no need to do anything here. Baseline Privacy: BPI - Disabled Certificate - BPI Public Key All the rest in the Baseline privacy section will not be touched. And that is that, that should be everything done and you should now be able to get online. __________________ All information is for educational purposes only, hacking is illegal Last edited by 666; 03-10-08 at 07:32 AM.

03-10-08, 03:44 PM	#4 (permalink)
chef1 Senior Member Join Date: Aug 2007 Posts: 174 Thanks: 52 Thanked 45 Times in 41 Posts	Re: haxorware 10.3 Chears for the heads up though my problem is that i cant access any menus to change the settings do u think its a bad flash

03-10-08, 11:41 PM	#5 (permalink)
toolzkit Night owl twit twoo :P Join Date: Sep 2008 Posts: 570 Thanks: 90 Thanked 65 Times in 46 Posts	Re: haxorware 10.3 set you pc's network card to IP 192.168.100.10 & Subnet mask 250.250.250.0 and try your 192 page again, but change it back when finished.

01-04-10, 12:15 PM	#6 (permalink)
andybr1ggs Senior Member Join Date: Dec 2007 Location: leeds Posts: 419 Thanks: 56 Thanked 61 Times in 49 Posts	Re: haxorware 10.3 sometimes you will have this problem....can you try it in another PC.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Haxorware Prob	Tommy88	Cable Modems	3	30-03-09 11:49 PM
Sb 5101 haxorware wont locklon!	james-warez	Cable Modems	5	14-12-08 04:48 PM
New Firmware for Motorola Surfboard 5101E, Anyone tried it?	AciidSn3ak3r	Cable Modems	33	17-09-08 07:40 PM
trying the new haxorware	666	Cable Modems	0	03-09-08 01:42 PM