Writing to card error! Mosc

[londongeeza]

Hi, i have a smt2110c with a MOSC card, that recently went. I can read the card no problem and modify the image i got 'ntl_full pack'. But when i attempt to write to the card i get this (i am using Phoenix mode 3.68 and nagraedit 4.1)

"Opening of COM7 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 33 32 4B
ROM Revision: 010
EEPROM Revision: RevA32
ProviderID: 5C
CamID: 24 ** ** **
Using BD3 Key: 4E ** ** ** ** ** ** 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: ED ** ** ** ** ** ** ** 55 66 77 88 99 ED CA 5E
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Attempting to login to BD0
Disabling card
Restart in progress
Restart in progress
Restart in progress
Writing ROM10 failed
Closing of COM7 was successful"

Anyone got any ideas??? All help is very much appreciated

[bramleyandy]

i see you have used the dc2 file from edcase how many times have you tryed to write the image as sometimes you have to write several times to work if not give the chip on the card a clean and try again or run the dc2 file again then try m8

[londongeeza]

Hi Andy, thanks for the reply mate. Ive tried lots of times now and cleaned the card fully. Is it something ive done wrong? When i done it first time, i still tried the card in the box, and it loaded but no channels (only FTA). Im at a loss now

[bramleyandy]

it wont work m8 as it got nawt wrote to it yet have yu tryed to mrom it m8 with settings 180 0 180 click repair and try and gaincontroll of the card

[londongeeza]

How is it i mrom the card mate? I'll then try it with the settings you gave. Does it look asthough ive fried the card? Or can it be salvaged with just nagra and infinity? (coz thatz all i got )

[bramleyandy]

na m8 card seems ok just try mrom and if the settings dont work just keep trying diffren delays sometimes its a pain but you will get there eventually

[londongeeza]

I cant seem to get mrom to work on my Vista machine. Ive been searching lots of forums, and its all to do with the 'mscomm32' file apparently. Ive placed into my reg but no joy. Ive tried to register it in command promt using 'regsvr32 mscomm32' but no luck either. Is there an alternate program or sum kinda of fix i can use??? Cheers!

[londongeeza]

I got it working, changed the settings to run as admin!!

[RORYSON]

just a quick question. i'm wanting to find out the bk and ird off a paird card of which the box has been taken off streem. wanted to know if there is any way of the cable-co finding out if the card has been red if the card and box go back online...
..cheers..