Mosc card problems - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

londongeeza · 09-10-08, 09:47 PM

Hi, i had my Mosc card open and working in nagra and phoenix. Trouble is, i wrote to the card and put it in the box (only got fta) and now when tryin to re-write again i get

Attempting to login to BD0
Disabling card
Restart in progress
Restart in progress
Restart in progress
Writing ROM10 failed
Closing of COM7 was successful"

Since then, used Mrom as recommended by user on this forum to repair the card. Got it repaired using 200,0,200 delay and get the message card should be repaired! Problem now is it wont read in Nagra at all. "Opening of COM7 failed" (which is the correct port).

In Mrom i cant open the card only repair it ("Error reading card" displayed). Does that have anything to do with it?
I appreciate all your time and effort, honestly

yusuf_gaz · 09-10-08, 09:52 PM

Hi

You need your com port of your proggy software and nagra mrom etc using same com port usually com 1 or 2.

Regards

G77 · 09-10-08, 09:54 PM

it dont look good mate

londongeeza · 09-10-08, 10:22 PM

"it dont look good mate" Nooooooooooooo

All the ports are assigned to 7 Yusuf, and it did work before! Please dnt tell me ive fried the card! What if i reset the card? Would that help???

G77 · 09-10-08, 10:31 PM

if its the correct port, the leds on the proggy will be flashing as it tries to read. will it not read at all in nagra? have you tried the pencil rubber method?

londongeeza · 09-10-08, 11:01 PM

I just unplugged everything, re-installed software and reset my computer and now it reads! Funny.... .....i'll crack on and keep you guys posted!! Thanks loads, (dnt suppose you got any idea's on how to stop the banks from collapsing?) Lol

londongeeza · 09-10-08, 11:10 PM

Ok, im back into the card, modified the image saved and attempted to write but back to this again...

Attempting to login to BD0
Disabling card
Restart in progress
Restart in progress
Restart in progress
Writing ROM10 failed
Closing of COM1 was successful

What can it be???? I'm perplexed, baffled, confused!

G77 · 09-10-08, 11:31 PM

does it read ok?

londongeeza · 09-10-08, 11:35 PM

It reads fine!!!

londongeeza · 09-10-08, 11:40 PM

Hmmmm, an interesting development. Ive continued writing to the card (around 15+ times) and now i get this

Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Error sending BackDoor 0 EMM
Write error encountered, attempting to restore original decrypt keys
ProviderID: 40
CamID: 1B 83 F0 D8
Attempting to login to BD3
Decrypt keys successfully restored
Writing ROM10 failed
Closing of COM1 was successful

Does that mean anything???

09-10-08, 09:47 PM	#1 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Mosc card problems Hi, i had my Mosc card open and working in nagra and phoenix. Trouble is, i wrote to the card and put it in the box (only got fta) and now when tryin to re-write again i get Attempting to login to BD0 Disabling card Restart in progress Restart in progress Restart in progress Writing ROM10 failed Closing of COM7 was successful" Since then, used Mrom as recommended by user on this forum to repair the card. Got it repaired using 200,0,200 delay and get the message card should be repaired! Problem now is it wont read in Nagra at all. "Opening of COM7 failed" (which is the correct port). In Mrom i cant open the card only repair it ("Error reading card" displayed). Does that have anything to do with it? I appreciate all your time and effort, honestly

09-10-08, 09:52 PM	#2 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: Mosc card problems Hi You need your com port of your proggy software and nagra mrom etc using same com port usually com 1 or 2. Regards

09-10-08, 09:54 PM	#3 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Mosc card problems it dont look good mate

09-10-08, 10:22 PM	#4 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mosc card problems "it dont look good mate" Nooooooooooooo All the ports are assigned to 7 Yusuf, and it did work before! Please dnt tell me ive fried the card! What if i reset the card? Would that help???

09-10-08, 10:31 PM	#5 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Mosc card problems if its the correct port, the leds on the proggy will be flashing as it tries to read. will it not read at all in nagra? have you tried the pencil rubber method?

09-10-08, 11:01 PM	#6 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mosc card problems I just unplugged everything, re-installed software and reset my computer and now it reads! Funny.... .....i'll crack on and keep you guys posted!! Thanks loads, (dnt suppose you got any idea's on how to stop the banks from collapsing?) Lol

09-10-08, 11:10 PM	#7 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mosc card problems Ok, im back into the card, modified the image saved and attempted to write but back to this again... Attempting to login to BD0 Disabling card Restart in progress Restart in progress Restart in progress Writing ROM10 failed Closing of COM1 was successful What can it be???? I'm perplexed, baffled, confused!

09-10-08, 11:31 PM	#8 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: Mosc card problems does it read ok?

09-10-08, 11:35 PM	#9 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mosc card problems It reads fine!!!

09-10-08, 11:40 PM	#10 (permalink)
londongeeza Junior Member Join Date: Oct 2008 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mosc card problems Hmmmm, an interesting development. Ive continued writing to the card (around 15+ times) and now i get this Attempting to login to BD3 BackDoor login verified Dumping Dataspace Error sending BackDoor 0 EMM Write error encountered, attempting to restore original decrypt keys ProviderID: 40 CamID: 1B 83 F0 D8 Attempting to login to BD3 Decrypt keys successfully restored Writing ROM10 failed Closing of COM1 was successful Does that mean anything???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help on reading mosc card	big up	Cable TV Chat	19	15-03-09 10:28 PM
jus unpooled card Should I use a non public MOSC image	KD1	Cable TV Chat	4	29-05-08 08:39 PM
mosc card	mancmw	Cable TV Chat	3	17-04-08 07:16 PM
bk and ird from a mosc card	the kize	Cable TV Chat	0	06-11-07 07:15 PM
MOSC Card help needed	mainblazer123	Cable TV Chat	5	20-08-07 12:18 AM