Unable to get AU working - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

TogaForComfort · 12-10-08, 05:29 PM

Hi all

Last thing for me to do is getting the AU working.
Everything works fine when I enter the keys manually so I know my setup is good.
Here is what I have done to create an AU card
1.Prepared card.
2.Used the AU fix as my flash file
3.reated the Ext EEprom as I did when making a non AU card but did not enter any keys.
4.Left the card in for about an hour whilst BBC1 was playing.

Channels are not playing.
am I missing something?

TwinTown · 12-10-08, 06:55 PM

Quote:

Originally Posted by TogaForComfort

Hi all

Last thing for me to do is getting the AU working.
Everything works fine when I enter the keys manually so I know my setup is good.
Here is what I have done to create an AU card
1.Prepared card.
2.Used the AU fix as my flash file
3.reated the Ext EEprom as I did when making a non AU card but did not enter any keys.
4.Left the card in for about an hour whilst BBC1 was playing.

Channels are not playing.
am I missing something?

leave on an encrypted channel like sly sports, can take up to 15 mins if all correct

TogaForComfort · 12-10-08, 07:42 PM

Cheers TwinTown.

That did the trick. Has a feeling it would be something simple.

maverick007 · 15-10-08, 03:39 PM

What setup do you have? I am struggling with a AU card too the card works with keys but if i leave my keys out and leave it on a encrpted channel it never updates.

I have a floppydtv-c card and blue zeta (I have a spare too) with joker 0.79 set with default box key and encryption on NAG not all.
In ex tw using progdbv/dvn veiwer and fire dtv none of them seem to update the card!!!

What settings are you running?

TogaForComfort · 15-10-08, 09:26 PM

Same as you except I'm using VMC instead of Progdvb or dvn viewer. and I'm in an ex-ntl area.
I created the original Ext flash file using Toxic7.
Entered cam ID using the first two digits for my area followed by random characters, the boxkey and a random IRD
All I did was create the file again but without putting in the Key 0 and Key 1.
Following TwinTowns suggestion of leaving it on an encrypted channel for 15 mins.
When you first go to and encrypted channel you will see a black screen, when the keys update the channel begins playing.

I'm new to this so I'm not really in a position to offer much in the way of help. I'm sure there are others that will see this and have some ideas

maverick007 · 15-10-08, 09:30 PM

what were the first two digits for your area? and where could i find mine?

TogaForComfort · 18-10-08, 12:09 AM

it's in this post: flash file 6 post in
27 for cw, 2C for tw or 24 for pure

Some people say you need the cam other say you don't. I have always used it just in case.

12-10-08, 05:29 PM	#1 (permalink)
TogaForComfort Member Join Date: Sep 2008 Posts: 65 Thanks: 12 Thanked 4 Times in 4 Posts	Unable to get AU working Hi all Last thing for me to do is getting the AU working. Everything works fine when I enter the keys manually so I know my setup is good. Here is what I have done to create an AU card 1.Prepared card. 2.Used the AU fix as my flash file 3.reated the Ext EEprom as I did when making a non AU card but did not enter any keys. 4.Left the card in for about an hour whilst BBC1 was playing. Channels are not playing. am I missing something?

12-10-08, 07:42 PM	#3 (permalink)
TogaForComfort Member Join Date: Sep 2008 Posts: 65 Thanks: 12 Thanked 4 Times in 4 Posts	Re: Unable to get AU working Cheers TwinTown. That did the trick. Has a feeling it would be something simple.

15-10-08, 03:39 PM	#4 (permalink)
maverick007 Junior Member Join Date: Oct 2008 Posts: 21 Thanks: 1 Thanked 1 Time in 1 Post	Re: Unable to get AU working What setup do you have? I am struggling with a AU card too the card works with keys but if i leave my keys out and leave it on a encrpted channel it never updates. I have a floppydtv-c card and blue zeta (I have a spare too) with joker 0.79 set with default box key and encryption on NAG not all. In ex tw using progdbv/dvn veiwer and fire dtv none of them seem to update the card!!! What settings are you running?

15-10-08, 09:26 PM	#5 (permalink)
TogaForComfort Member Join Date: Sep 2008 Posts: 65 Thanks: 12 Thanked 4 Times in 4 Posts	Re: Unable to get AU working Same as you except I'm using VMC instead of Progdvb or dvn viewer. and I'm in an ex-ntl area. I created the original Ext flash file using Toxic7. Entered cam ID using the first two digits for my area followed by random characters, the boxkey and a random IRD All I did was create the file again but without putting in the Key 0 and Key 1. Following TwinTowns suggestion of leaving it on an encrypted channel for 15 mins. When you first go to and encrypted channel you will see a black screen, when the keys update the channel begins playing. I'm new to this so I'm not really in a position to offer much in the way of help. I'm sure there are others that will see this and have some ideas

15-10-08, 09:30 PM	#6 (permalink)
maverick007 Junior Member Join Date: Oct 2008 Posts: 21 Thanks: 1 Thanked 1 Time in 1 Post	Re: Unable to get AU working what were the first two digits for your area? and where could i find mine?

18-10-08, 12:09 AM	#7 (permalink)
TogaForComfort Member Join Date: Sep 2008 Posts: 65 Thanks: 12 Thanked 4 Times in 4 Posts	Re: Unable to get AU working it's in this post: flash file 6 post in 27 for cw, 2C for tw or 24 for pure Some people say you need the cam other say you don't. I have always used it just in case.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remote not working - Eurovox Max Red	yursaduian	Eurovox	2	30-12-09 12:48 PM
Updated Eurovox working fine for a few weeks now remote won't and sound disappears!	abbas_ali	Eurovox	3	10-05-08 11:57 PM
10_04_08 Firmware patch Max Blue not working	JohnT	Eurovox	8	19-04-08 01:02 PM
Channels not working!	AmitUK	Eurovox	2	20-03-08 05:44 AM
Probs setting up mythtv	jontydog	Satellite TV on PC	36	27-08-06 07:15 PM