Cant find talkback on/ Di4001 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

geforcefx · 14-10-08, 10:08 PM

Iv seen most of the pics on were to cut the TRACK , & belive on this model u have to get inside the tuner to do this ..but im not sure how to take the tuner to bits , i dont want to brake anything! has anyone got any pics or could explaine how to get into the turner please so i can find the TALKBACK TRACK ! thx (as iv not seen any tuts on how to do this )

G77 · 15-10-08, 08:33 AM

the tuner comes off the main board. undo the nut which is around the cable input. there is then a screw holding the tuner to the pastic plug under the board. remove this. the tuner should then just slide off to the side of the box. if the box looks dusty and/or damp, you might need to use more force than usual to get it to come away from the boad as it might be stuck a bit with rust. your not going to break anything. just push it towards the side of the box with your thumbs while holding the side of the box with your fingers. you then manuover it towads the back of the box to get the cable supply thing out of the hole.

twist the bent bits of metal straight again and the lid of the tuner will come off. you have to be carefull doing this bit as the edges of the metal are very sharp!

geforcefx · 15-10-08, 07:54 PM

O.k m8 thx 4 the info ...i will let u know how i get on ...thx G77

Roco · 20-10-08, 01:49 AM

did you get it sorted mate? i know its hard to find when you arnt familiar with the boxes.
btw its the CIM(Cable interference module) , some call it the tuner though

geforcefx · 06-11-08, 08:54 AM

@ roco iv found it m8 ..well i ended up lifting the last pin/leg on the chip as shown .....all done ....iv took some pics of it ...........so if anyone else gets this prob ..ask me & i will post them if needed .... thx again Roco ...

lordoxford · 11-11-08, 03:53 PM

Hi Geforcefx!
Can I trouble you for a copy of the '4001 Tk-Bk pix, please?
Worth a thousand words, they say!!!
Cheers!!

Fizzy · 12-11-08, 07:31 PM

Hi mate can i also have a copy of the pics

thanks

geforcefx · 13-11-08, 09:31 AM

right guys ........ i have sent u both a pm /

RORYSON · 28-11-08, 05:23 PM

just a quick question. i'm wanting to find out the bk and ird off a paird card of which the box has been taken off streem. wanted to know if there is any way of the cable-co finding out if the card has been red if the card and box go back online...
..cheers..

madtrev5 · 28-11-08, 05:46 PM

dont mess with it if its a sbd box do a search thought the forums and you will get the answer u are looking for

14-10-08, 10:08 PM	#1 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Cant find talkback on/ Di4001 Iv seen most of the pics on were to cut the TRACK , & belive on this model u have to get inside the tuner to do this ..but im not sure how to take the tuner to bits , i dont want to brake anything! has anyone got any pics or could explaine how to get into the turner please so i can find the TALKBACK TRACK ! thx (as iv not seen any tuts on how to do this )

15-10-08, 08:33 AM	#2 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: Cant find talkback on/ Di4001 the tuner comes off the main board. undo the nut which is around the cable input. there is then a screw holding the tuner to the pastic plug under the board. remove this. the tuner should then just slide off to the side of the box. if the box looks dusty and/or damp, you might need to use more force than usual to get it to come away from the boad as it might be stuck a bit with rust. your not going to break anything. just push it towards the side of the box with your thumbs while holding the side of the box with your fingers. you then manuover it towads the back of the box to get the cable supply thing out of the hole. twist the bent bits of metal straight again and the lid of the tuner will come off. you have to be carefull doing this bit as the edges of the metal are very sharp!

15-10-08, 07:54 PM	#3 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: Cant find talkback on/ Di4001 O.k m8 thx 4 the info ...i will let u know how i get on ...thx G77

20-10-08, 01:49 AM	#4 (permalink)
Roco Senior Member Join Date: Dec 2006 Posts: 1,231 Thanks: 179 Thanked 135 Times in 128 Posts	Re: Cant find talkback on/ Di4001 did you get it sorted mate? i know its hard to find when you arnt familiar with the boxes. btw its the CIM(Cable interference module) , some call it the tuner though

06-11-08, 08:54 AM	#5 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: Cant find talkback on/ Di4001 @ roco iv found it m8 ..well i ended up lifting the last pin/leg on the chip as shown .....all done ....iv took some pics of it ...........so if anyone else gets this prob ..ask me & i will post them if needed .... thx again Roco ...

11-11-08, 03:53 PM	#6 (permalink)
lordoxford Junior Member Join Date: Nov 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Cant find talkback on/ Di4001 Hi Geforcefx! Can I trouble you for a copy of the '4001 Tk-Bk pix, please? Worth a thousand words, they say!!! Cheers!!

12-11-08, 07:31 PM	#7 (permalink)
Fizzy Junior Member Join Date: Sep 2008 Posts: 12 Thanks: 0 Thanked 1 Time in 1 Post	Re: Cant find talkback on/ Di4001 Hi mate can i also have a copy of the pics thanks

13-11-08, 09:31 AM	#8 (permalink)
geforcefx Senior Member Join Date: Jun 2008 Posts: 837 Thanks: 45 Thanked 31 Times in 30 Posts	Re: Cant find talkback on/ Di4001 right guys ........ i have sent u both a pm /

28-11-08, 05:23 PM	#9 (permalink)
RORYSON Senior Member Join Date: Feb 2008 Posts: 280 Thanks: 34 Thanked 7 Times in 5 Posts	Re: Cant find talkback on/ Di4001 just a quick question. i'm wanting to find out the bk and ird off a paird card of which the box has been taken off streem. wanted to know if there is any way of the cable-co finding out if the card has been red if the card and box go back online... ..cheers..

28-11-08, 05:46 PM	#10 (permalink)
madtrev5 Senior Member Join Date: Nov 2008 Location: brum Posts: 119 Thanks: 2 Thanked 2 Times in 2 Posts	Re: Cant find talkback on/ Di4001 dont mess with it if its a sbd box do a search thought the forums and you will get the answer u are looking for

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cant find services	tuan1978	Dreambox	23	01-07-08 08:39 PM
sammy 2100 talkback	slacky	Cable TV Chat	13	14-06-08 08:32 AM
Help can't see talkback of DI4001	abaaba	Cable TV Chat	15	29-04-08 10:43 PM
Help needed! Cant find Badr 3/4	jrahmad98	Satellite Help	3	03-04-07 07:03 PM