How to program a Diablo Cam

[Mickha]

The first thing you have to do is download the Cas Studio software, for your Cas programmer, which is needed to program a Diablo Cam:
_http://www.duolabs.com/casstudio.html
Do not connect your Cas programmer until after you have installed the drivers, it makes it easier for your computer to install them.

Once they are installed connect your Cas programmer to your computer using just the USB cable, this is all you require.

Next you need to download the latest Underworld file, this is currently underworld 138 and can be found in the satellite folder, Diablo sub folder.
For the link go to the Satellite Help & Support section and look for the Download Link thread.
Copy underworld138.dup to your computer desktop, as it makes it easier to find for programming.

Programming the Diablo is quite easy:
Insert your Cam carefully into the Cas programmer.
Start up the CIS 8.5c software, you should have a shortcut icon on your desktop.
Click on the Cam Module tab, and the 2 Diablo Cam icons, this starts up the Diablo software.
It should automatically be set to the Upgrade Cam tab.
Click on the little icon, with 3 dots, at the end of the File Name: address bar.
Navigate to your desktop, underworld138.dup and click open.
A green light should now appear on the Start Update icon, click this and wait for the Cam to finish programming.

Once complete click the yellow Exit icon, this will bring you back to CIS 8.5c.
You now need to adjust the configuration settings.
Click on the Utilities tab, and the Common Interface Host icon.
You should now see underworld 138 displayed, click enter.
Enter the Configuration folder and change the following:
Emulators to ON.
N2 AU to ON.
Emulators priority to 1 Emu 2 Card.
Once complete exit the software and remove your Cam.

With your Cam programmed you can currently open the following main packages:
Premiere 19E
DigitAlb 16E, except the HD channels.
Polsat 13E
Digi TV 1W
Canal Digital 1W.

For full details of all the channels available, on these packages, copy and paste these links into your browser, minus the underscore _

_http://www.lyngsat.com/packages/digi.html
_http://www.lyngsat.com/packages/canaldigitaal19.html Only the Irdeto 2 encrypted channels on this package.