eurovox max v clone compatible firmware

[sparktikus]

what firmware is compatible with clone max v boxes
thanks

[ronster]

Theres a clone safe bin file in the downloads section

Not sure if its only for blue boxes though

[gadgetfiend]

yep there is no clone safe firmware for the max-v m8 not an official 1 anyway i think the clones use the official f/w with limited success.

[sparktikus]

gadgetfriend
i noticed you said in a previous post you had compatible firmware
what is this
\or most compatible??
thanks

[gadgetfiend]

which post are you reffering to m8.

[lincsat]

I've just been sent a Clone MAX V to try and update for someone.

The main differences are: Rubber feet on the clone, a big "Security protected" sticker on the bottom and an obviously photocopied instruction book.

There is no response on the serial port to a UFL, Voxer or DnUpman, but the keys do A/U despite the firmware already on it being reported as from March 08.

[HONCHO]

if you have a clone you just use the red or black normal firmware and jtag when eva it falls over it takes a while for it to currupt the bootloader anyways

youi could also if you have a red put the bluetsop on and flash with blie clone safe firmware

[gadgetfiend]

Originally Posted by HONCHO

you could also if you have a red put the bluetsop on and flash with blue clone safe firmware

That wouldnt work as the blue firmware wether its clonesafe or official f/w does not contain the appropriate tuner driver for the red max as they are totally different tuners, you will get a no signal message on all channels m8.

[sparktikus]

Originally Posted by lincsat

I've just been sent a Clone MAX V to try and update for someone.

The main differences are: Rubber feet on the clone, a big "Security protected" sticker on the bottom and an obviously photocopied instruction book.

There is no response on the serial port to a UFL, Voxer or DnUpman, but the keys do A/U despite the firmware already on it being reported as from March 08.

Lincsat i have one of these boxes that have obviously gone out now with new keyroll. No response from serial port! flashes constantly betwen version 2.10 detected and com 1
Is there any way i can get new firmware onto this box
can i get it loaded from another way other than rs232 port
thanks

[carterjohn]

Originally Posted by lincsat

I've just been sent a Clone MAX V to try and update for someone.

The main differences are: Rubber feet on the clone, a big "Security protected" sticker on the bottom and an obviously photocopied instruction book.

There is no response on the serial port to a UFL, Voxer or DnUpman, but the keys do A/U despite the firmware already on it being reported as from March 08.

The only thing ive ever managed to load into a clone max v is a cdf file,pain in the ass entering keys but at least you have the latest channels!