REQ: Help StarView

[raster]

Hay all,

1st off let me say that I have looked over 40+ pages thrying to find info and dont seem to find what I am looking for so I am not posting to Req help.

I picked up a star view box tonight. Box seems to be working fine but some chanals are locked. I read something saying I shuld do this.

Originally Posted by jaysbee666

Press Menu on the remote, then press 1 5 7 0 , OK
scroll down to EMU and turn from OFF to ON exit exit
go on to sly sports 1 and let the INFO update

Now I got the box off some kid. It was in the box and came with modem com cable, and box. NO remote.

The kid says its chiped. I am not so shore and with this being my 1st starview I would not know. I can not seem to find softwair to flash images on to it. I did find alot of images thow.

So is ther anyway I can get in to the menu without a remoate?

If not can I do what I need to do on the pc without a remoate?
eg... flash new image.

And wher can I get hold of the app to flash it.

With haveing a dbox2 I had no need for any of this because of ftp but it dont have that.

Allso I am not shore if its a copy or not due to being the 1st one I have seen. So I am posting a image too. (sorry its not grate but maybe you can tell me what box it is.)

Thankyou for takeing time to read my post.

Regards,

Raster.
------------------------------------------------------------
EDIT:

OK Guys, I have found some tools over at http://www.box.net/shared/126wtvkow8

And downloaded gtrom loader v4.0 and cryptstar 1.4 clonesafe core 257. bin file I then went on to flash the box with it, The box counted to 100 and then the program said it was saved.

I then connected the box to the TV and it was just the same as befor. So now I am thinking that I need to put the codes in. Am I right in thinking this? If so back to the Q can I do it with out the remote? I have orderd one off ebay but still i would like to get the box working.

Thanks again,

Raster.

[satsmo]

You need the remote. You have flashed it correctly, but need to turn the key emu on, as above. Then scan on your provider.

[raster]

Originally Posted by satsmo

You need the remote. You have flashed it correctly, but need to turn the key emu on, as above. Then scan on your provider.

Thankyou,

I thort this would be the case. As I put befor I have orderd one on ebay. Hopeing it will not take to long to come. Once I have sorted it I will edit my 1st post to wher to get tools, How to flash and how to put keys in. I know the info is on the forums but its not in one topic.

Meening I am not realy a noob at hacking and when it takes me a day to find the info I am looking for thats not good. When you think how menny forums have this box on and yet the info for flashing it is at best shody.

So if I put all the info in one place then a mod can put it up as a sticky and then ther shuld be less new users asking for help on something that is so simpull to mod.

Regards,

Raster.

[satsmo]

There are quite a few guides about. I done one for an SV3 here Starview 3 - Setup Tutorial similar in method, just different firmware, (and loader in later SV2 revisions).

SV1, SV2, SV3, (all in one firmware/loader for an SV3), all use a similar method, SV4 differs as it is flashed via the USB with a memory stick.