2100c Sammy BK

[Vodkaholic1983]

hi all been trying to jtag this BK from my sammy 2100 but every time i get cant connect

i have Mac_not running and installed
the wires are soldered on right (i think)

ive never done a sammy before and the tuts dont say alot

do i plug the feed in when doing this?
anything else i have missed?

Thanks

[tariqz118]

no mate you dont connect to cable feed. has the box got net id set on it check by goin into engineers menu

[Vodkaholic1983]

lol i can edit

just read it and the BK is FF FF EF FF FF etc...

:S anyone any ideas i guessing its the bits but how do i found my area etc..

[Marc]

You need the latest bytes for the software version on your box, so if its 3.6 then the latest bytes are on this list,
excw 3_2B
0x00942d24 8

excw 3_3B
0x00974c70 8
or
0x009b5290 8
or
0x00f6a930 8

excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8
or
0x00f69af8
Excw 3.6
0x008D6284

pure 3_2L & 3_3L
0x00f6a8a8 8

pure 3_5L
0x0086b6b0 8
or
0x008adcd0 8
or
0x00f69af8 8

Pure 3.6
0x00895934


IRD for all

0x20020004 4

You will need to edit the config file in bke 2.2 to add the relevent bytes in, this you can do from the menu of bke,

Marc

[Vodkaholic1983]

Thanks mate i am in purentl
and is it Config 1 or 2 mate

Thanks again

config 1 and 2 says

[NTL]
IRD =0x20020004
BOXKEY =0x00A0E6DC

[CW]
IRD =0x20020004
BOXKEY =0x00941464

[PACE]
IRD =0x20040000
BOXKEY =0x20040004

[Marc]

You can edit either just make sure you pick the right config when you choose it in bke (ie when you pick box type and area and config )
Just remove the entry for your area ie pure then add the new one in its place So add this in the pure section next to boxkey 0x00895934

Marc

[Vodkaholic1983]

Originally Posted by Marc

You can edit either just make sure you pick the right config when you choose it in bke (ie when you pick box type and area and config )
Just remove the entry for your area ie pure then add the new one in its place So add this in the pure section next to boxkey 0x00895934

Marc

Hey ok i did this

[NTL]
IRD =0x20020004 4
BOXKEY =0x00895934

[CW]
IRD =0x20020004
BOXKEY =0x00941464

[PACE]
IRD =0x20040000
BOXKEY =0x20040004

but my box key and ird shows

IRD FE FF FF EA

FF FF FF FF FF FF FF FF

cheers

[666]

havent done 1 of these of ages,, wait till you see pd20 press the hold down button for 5 seconds then release, and wait till light turns green then connect jtag,,i think ant way

[Vodkaholic1983]

just checked the menu and i think am on 3_7 ? is this right or am i reading the wrong file

[Vodkaholic1983]

Originally Posted by 666

havent done 1 of these of ages,, wait till you see pd20 press the hold down button for 5 seconds then release, and wait till light turns green then connect jtag,,i think ant way

by doing that it gives me

FE FF FF EA
00 00 00 00 00 00 00 00