Pace 4001 Problem.

morashid679 · 14-11-08, 08:23 PM

My pace 4001 wont work now after I disabled TB in the tuner.

It just displays PACE and wont move.

Have I knackered it???

morashid679 · 14-11-08, 08:37 PM

I tried putting solder on where I removed the track to see of that helps, but still nothing.

Do you think if I get a new Tuner cim it will be OK.

reddiesel · 15-11-08, 12:06 AM

That shouldnt have caused that problem, you havnt dislodged the tiny surface mount resistor near to the chip leg ? Try booting up holding the down button in see what happens.

morashid679 · 15-11-08, 01:31 AM

As soon as I power up I get the Pace message.

I cant go into the em.

morashid679 · 15-11-08, 01:35 AM

Quote:

Originally Posted by reddiesel

you havnt dislodged the tiny surface mount resistor near to the chip leg ? .

I have now,

I tried to see if I did and while poking at the solder I ripped the resistor.

Could that be the cause????

Is there a solution.

Thanks

morashid679 · 21-11-08, 05:59 PM

I have got a new tuner and I still get the same message!!!!

Why is this happening?

It was working OK, till I messed with the tuner, now even though I got a new one its still stuck on Pace.

uni · 21-11-08, 07:47 PM

Had this problem,

listen morashid

leave it no cable feed and dont do nothing for say 30 minute it should sort it self out trust me it works had the same problem m8

get back to me and let me know cheers

Quote:

Originally Posted by morashid679

I have got a new tuner and I still get the same message!!!!

Why is this happening?

It was working OK, till I messed with the tuner, now even though I got a new one its still stuck on Pace.

morashid679 · 22-11-08, 12:09 AM

I did as you said UNI and it worked for 10 mins then it rebooted auto then PACE again.

reddiesel · 22-11-08, 01:11 AM

It needs caps replacing probably, have a look at the ones at the power supply, or there are a few around the two tuners, the bit you changed is the cim (cable interface module).

morashid679 · 22-11-08, 01:35 AM

I had a look at all the caps on the board and they seem ok.

None of them are bulging or anything.

14-11-08, 08:23 PM	#1 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Pace 4001 Problem. My pace 4001 wont work now after I disabled TB in the tuner. It just displays PACE and wont move. Have I knackered it???

14-11-08, 08:37 PM	#2 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Re: Pace 4001 Problem. I tried putting solder on where I removed the track to see of that helps, but still nothing. Do you think if I get a new Tuner cim it will be OK.

15-11-08, 12:06 AM	#3 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,271 Thanks: 117 Thanked 830 Times in 738 Posts	Re: Pace 4001 Problem. That shouldnt have caused that problem, you havnt dislodged the tiny surface mount resistor near to the chip leg ? Try booting up holding the down button in see what happens.

15-11-08, 01:31 AM	#4 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Re: Pace 4001 Problem. As soon as I power up I get the Pace message. I cant go into the em.

21-11-08, 05:59 PM	#6 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Re: Pace 4001 Problem. I have got a new tuner and I still get the same message!!!! Why is this happening? It was working OK, till I messed with the tuner, now even though I got a new one its still stuck on Pace.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

22-11-08, 12:09 AM	#8 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Re: Pace 4001 Problem. I did as you said UNI and it worked for 10 mins then it rebooted auto then PACE again.

22-11-08, 01:11 AM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,271 Thanks: 117 Thanked 830 Times in 738 Posts	Re: Pace 4001 Problem. It needs caps replacing probably, have a look at the ones at the power supply, or there are a few around the two tuners, the bit you changed is the cim (cable interface module).

22-11-08, 01:35 AM	#10 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 476 Thanks: 27 Thanked 63 Times in 59 Posts	Re: Pace 4001 Problem. I had a look at all the caps on the board and they seem ok. None of them are bulging or anything.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie pace 4001	GaryM	Cable TV Chat	8	15-12-09 04:46 PM
error 20 pace 4001	tony2803	Other Cable Boxes	0	26-10-08 08:18 PM
pace 4001	darter	Other Cable Boxes	1	06-10-08 01:01 AM
pace 4001	anndy1972	Cable TV Chat	1	05-10-08 02:52 PM
Getting a pace 4001 to work in a docsis are (ex cw)	sassbs11	Cable TV Chat	1	02-07-08 01:48 PM