Sagem dbox problem

[plasterer]

Just Copy your Service and bow k s from the working box
To the non working box
Doesent matter wot chips they are
As long as you dont transfer the Images .....Paul

[TwinTown]

Originally Posted by D4MAN0

hi,

I have tried what you suggested, but nothing still. I have 2 dbox, one black one chip, flash and scan Ok,one grey and 2 chip, flash with 2 chip flash,scanned an nothing. Need help.

r u using the same img on both doxes just converted 1x to 2x

[D4MAN0]

Hi,

thanks for helping, were will i find services is it a file, i did see a service but it was only 1kb,

the images are the same both boxes, but one is a 1x and the other is a 2x,

I'll look for the service file.

thanks

[D4MAN0]

Hi,

I need to transfer the service and what file you wrote bow ks whats this.

thanks

[yusuf_gaz]

Hi

You need to ftp your services and bouquets from the working box to non working box using an ftp program. Just do a search on ftp should put you on right track.

Regards

[TwinTown]

Originally Posted by D4MAN0

Hi,

I need to transfer the service and what file you wrote bow ks whats this.

thanks

both files bouquet.xml and service.xml are in the var/tuxbox/config/zapit folder

[D4MAN0]

hi,

I ahve transfered the 2 files for working box to knackered box, set location to edinburgh, scan on sym6952 , fast scan off, and still nothing.

Thanks for trying.

[TwinTown]

Originally Posted by D4MAN0

hi,

I ahve transfered the 2 files for working box to knackered box, set location to edinburgh, scan on sym6952 , fast scan off, and still nothing.

Thanks for trying.

the whole point of transferring the service file is to stop the need to scan. scanning creates the service file,....transfer the file only and see if u can see the channels

[D4MAN0]

Hi,

thanks I have done this and I know see all channels but they say error channel not available.

any ideas

[TwinTown]

Originally Posted by D4MAN0

Hi,

thanks I have done this and I know see all channels but they say error channel not available.

any ideas

there may be other files midding from the non-working box image...transfer the var/keys from the working box and transfer them to the non-working and make sure emu selected is evocamd and ucode 001a