V+ Pad fix, pad fix ? ? ? ? LOL

callum16 · 28-11-08, 08:47 AM

hi mate, been doing the pad fix for the chip as i took a pad off like a fool, so i did the fix and fitted chip it then got stuck in an update loop, so i then fitted a programmed chip and it showed er40 as 2 legs were touching and wen moving the leg i pulled the pad off, leg 5 now has nowere to go is there anywhere else leg 5 can go to on the board or have i well and truly foo*ed it?

fingures crossed

thanks callum

callum16 · 28-11-08, 05:03 PM

rite, its turn out the pad lifted on the origional position is, for the same leg as the chip ive lifted in the pad fix.
so were as 2719 on the board is were leg 5 would go i now need somewere else to send leg 5 can some 1 please help.

i attach pictures so you can understand what i mean.
Any help would massively hugely humungously be appreciated.

Pic11.jpg

Pic18.jpg

PLEASE HELP THANKS

wizboxes · 28-11-08, 05:41 PM

dont think there are any other alternative places to route that leg pal

callum16 · 28-11-08, 06:33 PM

is the origional brocked pad repairable, i see there are brocken pad repair kits? this difficult?

callum16 · 30-11-08, 09:13 PM

help!!!!!!!
:-)

callum16 · 03-12-08, 10:16 AM

still need help lol, any one think there may be anuva place to route that leg, or are we all agreed im fooooked

georgiagrrl · 03-12-08, 02:13 PM

is thre any of the track that connected to the pad still there? if so, get to maplin, get a fibreglass pencil and gently rub away at the green stuff til you see bare copper, and try soldering a link to that. if that's not possible, are the via holes still there, from the second picture? again, same story, but you'll probalby need really fine wire for that, like the kynar wire they use for modchips

callum16 · 11-12-08, 06:34 PM

yea can see a tiny bit, in the centre of the pad thats their, but how the hell am i gna get solder to stick 2 that? any good solderer's in the nottingham area? :-) whos got all the gear?

thanks

G77 · 11-12-08, 07:16 PM

fill the hole in with that conductive pen stuff and solder some kynar to the end of that resistor

28-11-08, 08:47 AM	#1 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	V+ Pad fix, pad fix ? ? ? ? LOL hi mate, been doing the pad fix for the chip as i took a pad off like a fool, so i did the fix and fitted chip it then got stuck in an update loop, so i then fitted a programmed chip and it showed er40 as 2 legs were touching and wen moving the leg i pulled the pad off, leg 5 now has nowere to go is there anywhere else leg 5 can go to on the board or have i well and truly foo*ed it? fingures crossed thanks callum

28-11-08, 05:03 PM	#2 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL rite, its turn out the pad lifted on the origional position is, for the same leg as the chip ive lifted in the pad fix. so were as 2719 on the board is were leg 5 would go i now need somewere else to send leg 5 can some 1 please help. i attach pictures so you can understand what i mean. Any help would massively hugely humungously be appreciated. Pic11.jpg Pic18.jpg PLEASE HELP THANKS

28-11-08, 05:41 PM	#3 (permalink)
wizboxes www.wizboxes.com Join Date: Aug 2008 Posts: 171 Thanks: 1 Thanked 35 Times in 31 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL dont think there are any other alternative places to route that leg pal __________________ bringing you the best in cable set top boxes DO NOT CONTACT ME BY PM REGARDING CABLE

28-11-08, 06:33 PM	#4 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL is the origional brocked pad repairable, i see there are brocken pad repair kits? this difficult?

30-11-08, 09:13 PM	#5 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL help!!!!!!! :-)


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

03-12-08, 10:16 AM	#6 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL still need help lol, any one think there may be anuva place to route that leg, or are we all agreed im fooooked

03-12-08, 02:13 PM	#7 (permalink)
georgiagrrl mad scottish bint Join Date: Nov 2008 Posts: 66 Thanks: 2 Thanked 7 Times in 4 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL is thre any of the track that connected to the pad still there? if so, get to maplin, get a fibreglass pencil and gently rub away at the green stuff til you see bare copper, and try soldering a link to that. if that's not possible, are the via holes still there, from the second picture? again, same story, but you'll probalby need really fine wire for that, like the kynar wire they use for modchips

11-12-08, 06:34 PM	#8 (permalink)
callum16 Senior Member Join Date: Apr 2008 Posts: 267 Thanks: 37 Thanked 2 Times in 2 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL yea can see a tiny bit, in the centre of the pad thats their, but how the hell am i gna get solder to stick 2 that? any good solderer's in the nottingham area? :-) whos got all the gear? thanks

11-12-08, 07:16 PM	#9 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 4,426 Thanks: 317 Thanked 864 Times in 753 Posts	Re: V+ Pad fix, pad fix ? ? ? ? LOL fill the hole in with that conductive pen stuff and solder some kynar to the end of that resistor __________________ When N3 hits your area ALL modded original and 3rd party cable boxes will be useless!