How To Program Card Yourself? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Apcov81 · 28-11-08, 01:44 PM

Hi,

I have a black box with a modded card in there, as with all the others I too have been hit with the Key update. I have the key codes but unsure on what I need to do next. I used to pay someone to update my card but this person is no longer local for me to ask.

My question is how can I do this myself, I have read some tutorials but seem to be confusing myself even more, I'm not sure what Card I have, it is a blank white one. It is in the black Pace N*L box. I am in a pure N*L area.

I have a card programmer, but not sure on what software to use and how to do it. Anyhelp here would be really appreciated.

If you do not want to post it, please PM me with some guidance.

Many Thanks

sassbs11 · 28-11-08, 02:12 PM

You got a lot of reading to do. start with the stickies.

5av1dg312 · 28-11-08, 02:28 PM

yes please read because the forums are busy at the minite with people wanting keys posting keys ect so try to read a little if there is something you are not sure of ask then. but it just doesnt come to you its like driving a car you got to learn.

addyb · 28-11-08, 02:43 PM

cable fordummies is a good guide to start with... its in down loads section... thats where i started... granted, its hard to read about things u dont know what your reading about, but once u've read a few, u'll soon get the jist...

sassbs11 · 28-11-08, 02:45 PM

Novice angel cable guide is good to start with. Its on the bigmaq toolbar.

dannyt0812 · 28-11-08, 02:55 PM

I'd reccomend you get the bigmaq toolbar. It contains all the files and info your going to need and as stated before id start reading Novice Angel Guide for all the info you need.

Apcov81 · 30-11-08, 02:44 PM

Hi,

Thanks for he info, I have dowloaded Nagraedit and romstudio to be prepared for when I use the reader for the card. Looking at the information available in the eng menu on box it looks like I have a Rom 10 A16 card.

However as mentioned above, the card is a blank white one so not sure how to proceed, am I right in thinking I can open the card using nagraedit and simply enter the key files in there and that should allow the box to run until the next key roll.

Thanks again

Apcov81 · 30-11-08, 03:19 PM

Hi,

I have tried to read the card but am getting the following error:

Attempting to login to BD3
Error, BackDoor reported disable - Card may contain update
Reading ROM10 failed
Closing of COM1 was successful

Any help with this?

Apcov81 · 01-12-08, 06:54 PM

I know many people were busy over the weekend with all the key rolls, but can someone help me with this please?

TIA

Roco · 01-12-08, 07:12 PM

what exactly is the card mate-any writing on it? i know its a rom10 but i dont think any of the original cards are blank white?

28-11-08, 01:44 PM	#1 (permalink)
Apcov81 Senior Member Join Date: Apr 2008 Posts: 145 Thanks: 5 Thanked 3 Times in 3 Posts	How To Program Card Yourself? Hi, I have a black box with a modded card in there, as with all the others I too have been hit with the Key update. I have the key codes but unsure on what I need to do next. I used to pay someone to update my card but this person is no longer local for me to ask. My question is how can I do this myself, I have read some tutorials but seem to be confusing myself even more, I'm not sure what Card I have, it is a blank white one. It is in the black Pace NL box. I am in a pure NL area. I have a card programmer, but not sure on what software to use and how to do it. Anyhelp here would be really appreciated. If you do not want to post it, please PM me with some guidance. Many Thanks

28-11-08, 02:12 PM	#2 (permalink)
sassbs11 Senior Member Join Date: Jun 2008 Posts: 358 Thanks: 99 Thanked 5 Times in 5 Posts	Re: How To Program Card Yourself? You got a lot of reading to do. start with the stickies.

28-11-08, 02:28 PM	#3 (permalink)
5av1dg312 Clueless Cable Moderator Join Date: Apr 2007 Location: Pure Posts: 1,580 Thanks: 23 Thanked 81 Times in 45 Posts	Re: How To Program Card Yourself? yes please read because the forums are busy at the minite with people wanting keys posting keys ect so try to read a little if there is something you are not sure of ask then. but it just doesnt come to you its like driving a car you got to learn. __________________ [SIGPIC][/SIGPIC] *Clueless Cable Moderator*

28-11-08, 02:43 PM	#4 (permalink)
addyb Senior Member Join Date: Apr 2008 Posts: 229 Thanks: 10 Thanked 7 Times in 7 Posts	Re: How To Program Card Yourself? cable fordummies is a good guide to start with... its in down loads section... thats where i started... granted, its hard to read about things u dont know what your reading about, but once u've read a few, u'll soon get the jist...

28-11-08, 02:45 PM	#5 (permalink)
sassbs11 Senior Member Join Date: Jun 2008 Posts: 358 Thanks: 99 Thanked 5 Times in 5 Posts	Re: How To Program Card Yourself? Novice angel cable guide is good to start with. Its on the bigmaq toolbar.

28-11-08, 02:55 PM	#6 (permalink)
dannyt0812 'The Don' Join Date: Oct 2008 Location: Stockport Posts: 392 Thanks: 62 Thanked 73 Times in 64 Posts	Re: How To Program Card Yourself? I'd reccomend you get the bigmaq toolbar. It contains all the files and info your going to need and as stated before id start reading Novice Angel Guide for all the info you need. __________________ Good things come to those who wait........ so be patient!

30-11-08, 02:44 PM	#7 (permalink)
Apcov81 Senior Member Join Date: Apr 2008 Posts: 145 Thanks: 5 Thanked 3 Times in 3 Posts	Re: How To Program Card Yourself? Hi, Thanks for he info, I have dowloaded Nagraedit and romstudio to be prepared for when I use the reader for the card. Looking at the information available in the eng menu on box it looks like I have a Rom 10 A16 card. However as mentioned above, the card is a blank white one so not sure how to proceed, am I right in thinking I can open the card using nagraedit and simply enter the key files in there and that should allow the box to run until the next key roll. Thanks again

30-11-08, 03:19 PM	#8 (permalink)
Apcov81 Senior Member Join Date: Apr 2008 Posts: 145 Thanks: 5 Thanked 3 Times in 3 Posts	Re: How To Program Card Yourself? Hi, I have tried to read the card but am getting the following error: Attempting to login to BD3 Error, BackDoor reported disable - Card may contain update Reading ROM10 failed Closing of COM1 was successful Any help with this?

01-12-08, 06:54 PM	#9 (permalink)
Apcov81 Senior Member Join Date: Apr 2008 Posts: 145 Thanks: 5 Thanked 3 Times in 3 Posts	Re: How To Program Card Yourself? I know many people were busy over the weekend with all the key rolls, but can someone help me with this please? TIA

01-12-08, 07:12 PM	#10 (permalink)
Roco Senior Member Join Date: Dec 2006 Posts: 1,231 Thanks: 179 Thanked 135 Times in 128 Posts	Re: How To Program Card Yourself? what exactly is the card mate-any writing on it? i know its a rom10 but i dont think any of the original cards are blank white?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to program atmega card	the kize	Cable TV Chat	22	29-01-09 01:16 AM
2110 Card Marked	yusuf_gaz	Cable TV Chat	9	26-09-08 08:26 PM
how to program a card	Physcogem	Cable TV Chat	9	16-09-08 05:43 PM
can i program a card	Physcogem	CAMs Cards & Programmers	0	15-09-08 01:41 PM