box does not recognise card - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

foxyuk · 28-11-08, 07:09 PM

put in card but sdays not inserted correctly...... it is

never had problem until i went to re-prog card

is this a ntl message.. as says cont tel number??

anyone else getting same

morashid679 · 28-11-08, 07:17 PM

We cant mind read?

What box?

What card is it?

Did you make sure to put a cam id?

foxyuk · 28-11-08, 07:24 PM

Quote:

Originally Posted by morashid679

We cant mind read?

What box?

What card is it?

Did you make sure to put a cam id?

sorry m8

yes cam id in

fun 4 open platform

box- nokia 4001

Keith81 · 28-11-08, 08:32 PM

do u get the channels?

does the msg disappear when you click ok and then come back when you change channel ?

This used to happen me - turn off the box and power up without the card in, once it boots up you shld get the msg saying card not properly inserted, insert the card, wait a minute or 2 and then the msg stops appearing.

foxyuk · 28-11-08, 09:01 PM

hi there missing loads of channels and still says same message all the time when going up channel

Marc · 28-11-08, 09:04 PM

What sort of camid did you use? you should prefix it with 24 for pure,(4001 box is pure)
Re do your external image using toxic,enter bk and ird (enter ird as it read ie 12111009)and a camid like 24A13C22 then choose the area tab at the bottom,save image and then write to card in external,then write the new flash to the card,it should work fine,

Marc

foxyuk · 28-11-08, 09:15 PM

Quote:

Originally Posted by Marc

What sort of camid did you use? you should prefix it with 24 for pure,(4001 box is pure)
Re do your external image using toxic,enter bk and ird (enter ird as it read ie 12111009)and a camid like 24A13C22 then choose the area tab at the bottom,save image and then write to card in external,then write the new flash to the card,it should work fine,

Marc

thanks pm sent

foxyuk · 28-11-08, 10:12 PM

not happening still giving me card not entered correctly and jumps a few hundred channels at a time...................... argjh

River-Rat · 28-11-08, 10:22 PM

so ur got ur bk and ird? and sure are correct?

best way to re do a card if a funcard is:

open ur reader software, read the exprom and save, drag that hex file over the convert to bin.
open toxic , open that bin file and this will list all the info in toxic , bk ird cam ect

put the keys in 00 and 01 save

erase card

write the bin file in the exprom FIRST

i then, but up to you close and re open my reader software and then i then write the flash

put on 110 ( living ) updates in seconds

morashid679 · 29-11-08, 04:10 AM

Quote:

Originally Posted by foxyuk

not happening still giving me card not entered correctly and jumps a few hundred channels at a time...................... argjh

What are you doing, tell us and we will tell you what you should and shouldnt do.

28-11-08, 07:09 PM	#1 (permalink)
foxyuk Member Join Date: Apr 2008 Posts: 89 Thanks: 4 Thanked 5 Times in 4 Posts	box does not recognise card put in card but sdays not inserted correctly...... it is never had problem until i went to re-prog card is this a ntl message.. as says cont tel number?? anyone else getting same

28-11-08, 07:17 PM	#2 (permalink)
morashid679 Senior Member Join Date: Mar 2008 Location: Herts Posts: 477 Thanks: 27 Thanked 63 Times in 59 Posts	Re: box does not recognise card We cant mind read? What box? What card is it? Did you make sure to put a cam id?

28-11-08, 08:32 PM	#4 (permalink)
Keith81 Member Join Date: Apr 2008 Posts: 57 Thanks: 5 Thanked 2 Times in 2 Posts	Re: box does not recognise card do u get the channels? does the msg disappear when you click ok and then come back when you change channel ? This used to happen me - turn off the box and power up without the card in, once it boots up you shld get the msg saying card not properly inserted, insert the card, wait a minute or 2 and then the msg stops appearing. Last edited by Keith81; 28-11-08 at 08:45 PM.

28-11-08, 09:01 PM	#5 (permalink)
foxyuk Member Join Date: Apr 2008 Posts: 89 Thanks: 4 Thanked 5 Times in 4 Posts	Re: box does not recognise card hi there missing loads of channels and still says same message all the time when going up channel

28-11-08, 09:04 PM	#6 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 647 Thanks: 18 Thanked 182 Times in 143 Posts	Re: box does not recognise card What sort of camid did you use? you should prefix it with 24 for pure,(4001 box is pure) Re do your external image using toxic,enter bk and ird (enter ird as it read ie 12111009)and a camid like 24A13C22 then choose the area tab at the bottom,save image and then write to card in external,then write the new flash to the card,it should work fine, Marc

28-11-08, 10:12 PM	#8 (permalink)
foxyuk Member Join Date: Apr 2008 Posts: 89 Thanks: 4 Thanked 5 Times in 4 Posts	Re: box does not recognise card not happening still giving me card not entered correctly and jumps a few hundred channels at a time...................... argjh

28-11-08, 10:22 PM	#9 (permalink)
River-Rat Dogs Body Join Date: Apr 2007 Posts: 2,744 Thanks: 62 Thanked 384 Times in 281 Posts	Re: box does not recognise card so ur got ur bk and ird? and sure are correct? best way to re do a card if a funcard is: open ur reader software, read the exprom and save, drag that hex file over the convert to bin. open toxic , open that bin file and this will list all the info in toxic , bk ird cam ect put the keys in 00 and 01 save erase card write the bin file in the exprom FIRST i then, but up to you close and re open my reader software and then i then write the flash put on 110 ( living ) updates in seconds __________________ A wise man once said " if you don`t ask, you want get"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2110 Card Marked	yusuf_gaz	Cable TV Chat	9	26-09-08 09:26 PM
NTL Card Question	arrows	Cable TV Chat	17	02-07-08 09:19 PM
One Fix For Faulty Card Readers	Ciwan	Cable TV Chat	1	26-04-08 02:49 PM