Firmware probs with Max v?

[shaundu]

May be having probs with latest firmware on Max v 2008 (I have searched other postings for info but nothing) - Have downloaded f/w (twice!) but I now cannot tune into any channels.
I followed same procedure as last firmware update in April (which was completed successfully), can anyone please point me in right direction?
Out of interest I checked the key codes & provider info, they were all set at 0.

[20rsport]

Originally Posted by shaundu

May be having probs with latest firmware on Max v 2008 (I have searched other postings for info but nothing) - Have downloaded f/w (twice!) but I now cannot tune into any channels.
I followed same procedure as last firmware update in April (which was completed successfully), can anyone please point me in right direction?
Out of interest I checked the key codes & provider info, they were all set at 0.

Please read "Ronsters Guide To Flashing Box For Newbies" its all there....in the Eurovox forums

Stage One
Ronsters Guide To Flashing Box For Newbies
Once flashed do a rescan, and your channels should be back.

Stage Two
Firmware can be located @

_http://thechatterboxcc.ourtoolbar.com/

The new firmware for the Eurovox Max V is the one labelled "UFL Eurovox Max V-Box AU fix"..

Stage 3
CDF Flies can be found here:-

CDF Files for the Eurovox

The CDF files is for those that forget to back up there channel data.


ALSO READ THIS
Check to see if your box is a Clone or FAQ's
Eurovox Frequently Asked Questions...
How can I connect my PC to the eurovox without RS232?
How can I connect my laptop to the eurovox without RS232?


________
If you found this post helpful please remember to click the "Thanks" button

[AciidSn3ak3r]

do a power scan for channels in the installation part, and then you should get ur channels back

[shaundu]

Thanks for replies, appreciated.
Have done several powerscans, but nothing.
Will have a reread of other postings again, see if I can sort it.

[carterjohn]

Originally Posted by shaundu

Thanks for replies, appreciated.
Have done several powerscans, but nothing.
Will have a reread of other postings again, see if I can sort it.

Try a factory reset then power scan.

[smoggy]

and make sure you are scanning with the correct symbolrate

[Daley]

We have 3 2008 Max V's in the house, I've just updated them all 1 after the other, all worked first time flawlessly and all accepted the cdf I backed up just before updating. Cheers to whoever in the world made the new update.

[shaundu]

Out of interest I downloaded the April firmware back onto the box & imputted the last set of key codes, and hey presto! powerscan worked, and got all the channels back. Have downloaded the latest firmware yet again from Bigmaq toolbar, but still not getting any channels Still don't understand what's happening...
I also noticed a an additional title has been added under installation, which is "deep scan" - is it worth trying this?