Step by step guide to transferring the new Nagrarom7.bin file to Dbox2

[skywalker111]

Hello All does anyone know why my ftp connection fails in about 30 secs?I tried increasing the timeout but sometimes i can dtp the site which is very slow when I try to transfer the image takes ages or time out....Im using ax over cable to ftp and followed sub zero's guide... thanks in advance.

[Subzero]

Make sure your firewall is disabled and you have done the following:
On the PC go to START BUTTON > SETTINGS > CONTROL PANEL and open the NETWORK CONNECTIONS

Right-click the network card (it may say Local Area Connection),
and select PROPERTIES > CONFIGURE > ADVANCED tab

Highlight the ‘Connection Type’ (in the left window),
and in the right ‘Value window there is a drop down menu (it will probably currently say automode)
Change the Value to 10 full mode then OK

And follow everything else in the guide :-)

[skywalker111]

Originally Posted by Subzero

Make sure your firewall is disabled and you have done the following:
On the PC go to START BUTTON > SETTINGS > CONTROL PANEL and open the NETWORK CONNECTIONS

Right-click the network card (it may say Local Area Connection),
and select PROPERTIES > CONFIGURE > ADVANCED tab

Highlight the ‘Connection Type’ (in the left window),
and in the right ‘Value window there is a drop down menu (it will probably currently say automode)
Change the Value to 10 full mode then OK

And follow everything else in the guide :-)

I have followed your guide Subzero and I can connect sometimes for a little while i get all the directory list ing etc can see the file but very slow and it disconnects in a while i have no time transferring the new image and is this because im on a laptop?I m on xo and I have followd and you mean the connection type is my network card is it?I have set the speed and duplex to 10mbfull and the flow control enabled.
What am I missing?Thanks a lot for your time

[humforce]

Originally Posted by skywalker111

I have followed your guide Subzero and I can connect sometimes for a little while i get all the directory list ing etc can see the file but very slow and it disconnects in a while i have no time transferring the new image and is this because im on a laptop?I m on xo and I have followd and you mean the connection type is my network card is it?I have set the speed and duplex to 10mbfull and the flow control enabled.
What am I missing?Thanks a lot for your time

that should be 10 half duplex

[Subzero]

Mine tends to work fine with 10 full, but try humforce's suggestion. Btw which FTP program are you using? If you are still having problems connecting, do a forum search for the IFA method and try that.

[skywalker111]

Will try and give a shout thanks

[ballal10]

Originally Posted by Subzero

A typical folder contains:

AutoRoll.key
Autoupdate.key
Keylist.txt
SoftCam.Key
camd_cfg
gbox_cfg
mg_cfg
nagra
nagraepr7.bin
nagraram7.bin
nagrarom7.bin

This can vary depending on your image. Post what you have in you keys folder.

Hey sub zero..

I'm currently having to manually input new key's into my dbox2 everytime there's a new keyroll..

my var/keys/ folder currently contains the following:

Autoupdate.Key
camd_cfg
Keylist.txt
nagrarom7.bin

I hardly have any files in my box compared to yours lol, which is probably why my keys don't update automatically.. any idea's mate? cheers...

[Subzero]

Just flash a new auto updating image for your box. A guide on how to do this is on post 17 of this thread. Good luck

[ballal10]

Originally Posted by Subzero

Just flash a new auto updating image for your box. A guide on how to do this is on post 17 of this thread. Good luck

Thanks for the quick reply mate, I've read through your excellent flashing guide and i think my dbox2 is currently using a sportster image (a sportster logo appears when I boot my dbox2) but i was wondering what is the "new auto updating image" for my box and where can I download it from buddy?

I initially thought the "nagrarom7.bin" was the autoupdating image (which I transferred into my box via Flash FXP) but its still not currently updating the keys.. so now i'm a little puzzled and not sure where to go from here..

Also, how can I make sure that I use the correct 1x or 2x Image?

Sorry for the questions mate, I'm a complete newbie to all this and I spent over £200 on purchasing the box a few weeks ago lol... so i'm feeling kinda gutted now that the keys don't update... Thanks for your help mate!!

[Subzero]

You spent quite a bit there, you could have got a HD box for that much! Never mind, the image files are in the private FTA: http://www.techwatch.co.uk/forums/25...oad-links.html

If your box is a nokia then most likely it is a 2x chip. If a sagem, take off the cover and count how many amd/intel chips it has. Do a forum search for pics on where to find the chips if you are struggling