eurovox error code

[immy_2k]

some peeps just reflashed and worked but other tried everything else and nothing so if uve tried everything else try this, but u should have went to the post i made for clones and orginals but anyway here goes

i did a post on this but no one bothered to go to it, now either uve managed to brick ur box but when u get that number do u also get a blankscreen if u do then disconnect scart connect eurovox upto tv with coxial cable scan on tv for channel should come up with enter code its 1000 or master code 1004 now delete channel data and do a factory default scart av should start working so revert back to scart if this doesnt work for u then maybe uve bricked it
if u need more help go to the post about orginial and cloned blue boxes for more instructions mate

[carterjohn]

Originally Posted by asifqabil

so if they are bricked, what can be done ?...

If you 100% cannot get it working by flashing in standby mode you will need to j-tag it.....

Getting more info off peeps there seem to be some that when they use the new firmware it works on their clones thats good news for them, but still do be careful if you do try it and always have a jtag kit at hand it cant hurt
if you manage to brick your box then heres how to jtag
list of things you will need 1) jtag kit 2) skymax software 3)tsop for your box
now heres what you do

1) connect jtag
2)After connecting jtag turn box on and wait until it has booted
3)Open sky max.
4) Select 2mb
5)click connect
6)click,erase, should say successful
7)click write, window will open select the tsop file for example (2006tsop(blue).bin or select the correct tsop for what ever your box is
8)should now write to eurovox wait a couple of minutes
9) if 'ram fail' shows dont worry turn box off then on and you should see 0000 or 0001 on lcd, thats it your done

dont worry ur remote wont work yet so scan for channels, do erase channels first the default and full scan

if u need to then just reflash with safe clone firmware

(thanks to whoever i copied that off!)

[asifqabil]

immy mate, how do u mean connect eurovox upto tv with coxial cable ?????...it connecys through scart, if i dont use the scart how do i connect to it ?....i basically get it out of standby and the into standby but nothing else, no picture, no menu nothing...sorry if posted in wrong forum, wont happen in future...

thanks

[immy_2k]

ok connect a coxial cable (its usually the one u connect a video to tv) just that cable connect it to the back of ur eurvox where it says "tv/vcr" and the other end to the back of the tv, now all u do is get the tv remote and scan for channels like u owuld normally automatic scan of channles on tv see if it picks up a screen that asks for a code if it does then let me know

[immy_2k]

dont worry aobut no menu or anything just have ur eurovox connected with no scart just the coxial cable and eurovox on not in standby but on, and scan on tv for channels

[doddster]

mine works with everything u said but it keep stopping the picture when i access a channel and going back to boot mode

[immy_2k]

ok now press 1000 or 1004 u have to delete channel data and factory defualy then scart will begin to work again

[asifqabil]

immy mate you're the man, got it up.....

serious man thanks, i owe u one...

shall i just put the clone safe software on it ?...

[immy_2k]

dont go into any channels just go straight to menu >config>clear data> clear channels>factory default and thats it scan on correct symbol rate scartav should now be working and ur box back to normal with new firmware on

[benyboybob]

Maybe a sticky for cloned boxes is need!