have the keys rolled again this morning/last night

[faisal_uk]

I have just switched on my Eurovox 2 and it just says 'please wait code being updated...'
but I put in the new codes last night (03.12.08 11:43 Keys) and it was working fine

have they changed again for anyone else?

[blade rider]

try keymaster see if they've changed yet

[richgsi]

y u not used new sw on it?

[richgsi]

sorry not read the post properly

[stottey]

no keys have changed yet. the last update key was on the 3/12/08..
have you not updated ya box with the fix. ya dont need to update the keys anymore m8 you will find it on the toolbar. look up other threads on how to do it.

[stottey]

just said on top of the toolbar that .4/12/08 the keymaster is overloaded try it later m8.

[faisal_uk]

I have tried keymaster and there are no new codes for today that's why I was just asking if other people have the same problem.

[stottey]

mine is ok. but looking at the other threads someother people are havin same problem m8. try and update your box with the new fix. this will sort it out for ya...

[stottey]

Re: Here is the fix.
--------------------------------------------------------------------------------
Heres a quick guide on how to transfer the nagrarom7 file using FTP.
Let’s Get Started:
To make this easier, place your tv/box close to your PC
(so that you have easy access to the back of both, to change cables around.)

1. PC Setup: Now would be a good time to create a ‘System Restore Point’ on your PC,
(as you will have probably have to change the IP settings, to something different from your internet settings).
Unplug your internet connection NOW to avoid any conflicts.
Switch OFF all firewalls and antivirus on your PC
(and make sure windows XP built in firewall is OFF)

2. Power on the TV and DBox, but don’t hook it up to your PC yet.
Using the remote control, press DBOX > SETTINGS > NETWORK
Take a note of the DBox network settings
(this is an example only)
IP-Address 192.168.0.3
Net Mask 255.255.255.0
Broadcast 192.168.0.255
Def Gateway 192.168.0.2
Name Server 192.168.0.2

3. On the PC go to START BUTTON > SETTINGS > CONTROL PANEL and open the NETWORK CONNECTIONS
Right-click the network card (it may say Local Area Connection),
and select PROPERTIES > CONFIGURE > ADVANCED tab
Highlight the ‘Connection Type’ (in the left window),
and in the right ‘Value window there is a drop down menu (it will probably currently say automode)
Change the Value to 10 full mode then OK
Again, right-click the same connection, and go back into the PROPERTIES of the network card
There is a List of items in the first window (you may need to scroll down further)
Left-click on internet protocol, when it is highlighted, click the PROPERTIES button.
Select the ‘Use the following IP address’
Enter the settings, as you seen it on your DBox, except the IP address will be one digit less of the last number
(eg. 192.168.0.3 on DBox, so use 192.168.0.2 on your PC)
OK these settings.

4. Connect the RJ45 cable between PC and DBox (linking them together)
Run the Flash FXP program
On one side should be the files on the PC
On the other side make sure you select ‘ftp browser’ (the tab is a monitor and folder picture)
(It may already be selected)
Click CONNECT (the icon which looks like a lightening bolt)
Select QUICK CONNECT the three boxes require some information
SERVER OR URL = (enter the IP address of the DBox)
USERNAME = root
PASSWORD = dbox or dbox2 or commando
Then click CONNECT
You should now see the DBox files in the window (if not, check the IP settings/password).

5. In the PC file window, browse to the folder containing the nagrarom7 file.
In the DBox window browse to the var/keys folder (NOTE: you may already be in this folder).
Transfer the nagrarom7 file across into the var/keys folder
Delete any other nagrarom(10/11... etc) files
When done close down the Flash FXP program.
Enable Autoupdates on your Image (check previous posts on how to do this).
Now reboot the DBox
Switch to a non-FTA channel. Wait a few minutes for codes to update.
6*. You may want to use the ‘System Restore’ program now, on your PC,
Select ‘Restore To An Earlier Time’ and choose the correct point
Turn back ON your firewall, and virus checker
Connect back onto the internet, and online to the forum
Let us know if you have any problems.

[faisal_uk]

Originally Posted by stottey

just said on top of the toolbar that .4/12/08 the keymaster is overloaded try it later m8.

Ok thanks for your help guys. I guess it will be on keymaster shortly.