Jtag-ing A Samsung 2100C - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Ciwan · 04-12-08, 10:44 AM

Hi Guys

It has been so long since I last used OCD Commander and I have forgotten everything

When I first open the program I get the following Dialog Box:

Can someone please tell me what settings I need to choose there > also What the LATEST Bytes are for NTHELL Pure Area.

Thanks.

windy1603 · 04-12-08, 11:52 AM

Settings are ARM processor and device 940

byte address

3.2 & 3.3L Software 0x00F6A8A8
3.5L Software 0x0086B6B0 or 0x008ADCD0
3.6L Software 0x00895934

ird = 0x20020004 for all version. I find that BKE2.2 or Sammy Debug Tool is easier to use.

Ciwan · 04-12-08, 12:41 PM

Awesome thanks Windy

I actually tried BKE2.2 before downloading OCD Commander >> but it didn't work !!

It kept giving me errors.

BKE2.2 works Perfectly for Pace Boxes (Di4001, Di4010) but it doesn't work for the Samsung boxes.

Anywhoo I shall try the bytes you provided along with them settings and let you know if it worked with OCD Commander.

Thank You

ronster · 04-12-08, 12:52 PM

Have a read of this thread Ciwan it might jog yer memory

sammy jtag

Ciwan · 04-12-08, 12:55 PM

cool will have a read of that thread for sure

Thanks Ronster

Ciwan · 04-12-08, 11:51 PM

OCD Commander doesn't work either

it gives me errors !!!!

when using BKE2.2 do I have to put the box in Debug mode ? if so .. how do I make go into Debug mode ?

Thanks

pepper · 04-12-08, 11:59 PM

double check your connections then boot box up to bbc1 then jtag with correct bytes all will be well

Ciwan · 04-12-08, 11:59 PM

I've forgotten how the jtag pins go

anyone has a picture please ?

pepper · 05-12-08, 12:02 AM

noobs guide to sammy is in downloads its in there

pepper · 05-12-08, 12:04 AM

vcc=2 tdi=5 tms=7 tck=9 tdo=13 gnd=4-20

04-12-08, 10:44 AM	#1 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Jtag-ing A Samsung 2100C Hi Guys It has been so long since I last used OCD Commander and I have forgotten everything When I first open the program I get the following Dialog Box: Can someone please tell me what settings I need to choose there > also What the LATEST Bytes are for NTHELL Pure Area. Thanks.

04-12-08, 11:52 AM	#2 (permalink)
windy1603 Member Join Date: Aug 2007 Posts: 40 Thanks: 4 Thanked 4 Times in 4 Posts	Re: Jtag-ing A Samsung 2100C Settings are ARM processor and device 940 byte address 3.2 & 3.3L Software 0x00F6A8A8 3.5L Software 0x0086B6B0 or 0x008ADCD0 3.6L Software 0x00895934 ird = 0x20020004 for all version. I find that BKE2.2 or Sammy Debug Tool is easier to use. __________________ If you cant fix it with a hammer it's an electrical fault

04-12-08, 12:41 PM	#3 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Jtag-ing A Samsung 2100C Awesome thanks Windy I actually tried BKE2.2 before downloading OCD Commander >> but it didn't work !! It kept giving me errors. BKE2.2 works Perfectly for Pace Boxes (Di4001, Di4010) but it doesn't work for the Samsung boxes. Anywhoo I shall try the bytes you provided along with them settings and let you know if it worked with OCD Commander. Thank You

04-12-08, 12:52 PM	#4 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: Jtag-ing A Samsung 2100C Have a read of this thread Ciwan it might jog yer memory sammy jtag

04-12-08, 12:55 PM	#5 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Jtag-ing A Samsung 2100C cool will have a read of that thread for sure Thanks Ronster

04-12-08, 11:51 PM	#6 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Jtag-ing A Samsung 2100C OCD Commander doesn't work either it gives me errors !!!! when using BKE2.2 do I have to put the box in Debug mode ? if so .. how do I make go into Debug mode ? Thanks

04-12-08, 11:59 PM	#7 (permalink)
pepper Senior Member Join Date: Mar 2007 Location: England Posts: 173 Thanks: 1 Thanked 27 Times in 27 Posts	Re: Jtag-ing A Samsung 2100C double check your connections then boot box up to bbc1 then jtag with correct bytes all will be well

04-12-08, 11:59 PM	#8 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Jtag-ing A Samsung 2100C I've forgotten how the jtag pins go anyone has a picture please ?

05-12-08, 12:02 AM	#9 (permalink)
pepper Senior Member Join Date: Mar 2007 Location: England Posts: 173 Thanks: 1 Thanked 27 Times in 27 Posts	Re: Jtag-ing A Samsung 2100C noobs guide to sammy is in downloads its in there

05-12-08, 12:04 AM	#10 (permalink)
pepper Senior Member Join Date: Mar 2007 Location: England Posts: 173 Thanks: 1 Thanked 27 Times in 27 Posts	Re: Jtag-ing A Samsung 2100C vcc=2 tdi=5 tms=7 tck=9 tdo=13 gnd=4-20

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
samsung 2100c jtag error	nomic	Cable TV Chat	2	19-11-08 01:59 PM
samsung 2100c jtag gives ird but no box key	mancmw	Cable TV Chat	67	27-07-08 10:38 AM