blue clone no screen possible fix

[racecoursepete]

if you get an error come on the display and are not able to see anything through the scart then try this. Plug everything in as normal, then press the reset button inside the eurovox (look through the vents on the top you will see it) you will then get 0000 on the ev display, now point the remote at the ev and press 1004 then press menu then right right right down down ok 1004 down ok ok ok, now wait a few seconds. Then you should get a picture on your tv, now go flash your box with the old clone safe firmware and await a new clone safe one. Hope this helps. Thanks to killuminatti for the directions.

[killuminatti]

This process works as i have used it on two eurovox blue box clones. Both pics came up distorted but after you reflash with old firmware your pic will be back up.

One box gave an error code PEAA after i turned the power off,

If you switch the box off and this code appears when switched back on, switch the box off and on again and it should be fine and ready for you to input the codes manually which you can get of bigmak, chatterbox toolbars, at least until the new clone firmware arrives. ( if it does)

[racecoursepete]

sorry the text is all together, dont have an enter button on my phone.