quick response needed for glitching rom 11 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

hantsmale · 12-12-08, 10:25 PM

im trying to glitch a rom 11 im using tiny unlooper and using sidewinder.
ive had the nornal stuff when gltching this card
----++rst7 but at the end of last line i got 9000! ! in green and underneath rom 11 payload ack recieved and under that i have sending ird write back packet....
i have both lights on..on the unlooper and has been for nearly 2 hours now.ive checked the task manager and it says sidewinder is still running..but its running cpunusage at 100%
right question is do i end the program as sidewinder is running or is there an error with program.
im using windows xp and set sidwinder to run in windows98/me
any advice would be greatful
many thanx
gary

yusuf_gaz · 12-12-08, 10:52 PM

Hi

Id use the mikdata script in winexplorer.

Regards

hantsmale · 12-12-08, 11:17 PM

Quote:

Originally Posted by yusuf_gaz

Hi

Id use the mikdata script in winexplorer.

Regards

i would but looks like ive knackered another card as i cant get a pot reading now
gary

homer@shack · 13-12-08, 01:20 AM

try reading the card in nagra, if ird is lost you can always convert the barcode on the box, or read it off the em menu.

sqwidge · 13-12-08, 10:57 AM

if you get 9000 then your card has popped just read in 4.1 and away you go

G77 · 13-12-08, 11:11 AM

i twiddle the pot a little when its waiting for the writeback. it usualy comes back with it. the card is unlooped and ok but ird will not be on there.

hantsmale · 13-12-08, 12:51 PM

Quote:

Originally Posted by sqwidge

if you get 9000 then your card has popped just read in 4.1 and away you go

tried reading card and got error

Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful

sharkbait559 · 13-12-08, 12:57 PM

cards knackered mate , make sure you have the right com port and try reading a few times before you give up , i have it sometimes but it will read he 3rd or fourth time.

hantsmale · 13-12-08, 12:59 PM

yes thought it was knackered last night.thanx for all that has helped with info
gary

sqwidge · 13-12-08, 01:23 PM

before you bin it you should also slide the card in and out of the reader a few times to remove any s.hit left on the prongs that read your card

12-12-08, 10:25 PM	#1 (permalink)
hantsmale Senior Member Join Date: Sep 2007 Posts: 352 Thanks: 39 Thanked 16 Times in 15 Posts	quick response needed for glitching rom 11 im trying to glitch a rom 11 im using tiny unlooper and using sidewinder. ive had the nornal stuff when gltching this card ----++rst7 but at the end of last line i got 9000! ! in green and underneath rom 11 payload ack recieved and under that i have sending ird write back packet.... i have both lights on..on the unlooper and has been for nearly 2 hours now.ive checked the task manager and it says sidewinder is still running..but its running cpunusage at 100% right question is do i end the program as sidewinder is running or is there an error with program. im using windows xp and set sidwinder to run in windows98/me any advice would be greatful many thanx gary

12-12-08, 10:52 PM	#2 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: quick response needed for glitching rom 11 Hi Id use the mikdata script in winexplorer. Regards

13-12-08, 01:20 AM	#4 (permalink)
homer@shack Senior Member Join Date: May 2008 Posts: 171 Thanks: 3 Thanked 20 Times in 19 Posts	Re: quick response needed for glitching rom 11 try reading the card in nagra, if ird is lost you can always convert the barcode on the box, or read it off the em menu.

13-12-08, 10:57 AM	#5 (permalink)
sqwidge Thanks to those that help Join Date: Jul 2008 Location: At home Posts: 380 Thanks: 19 Thanked 32 Times in 29 Posts	Re: quick response needed for glitching rom 11 if you get 9000 then your card has popped just read in 4.1 and away you go __________________ All information supplied is for educational purposes only.

13-12-08, 11:11 AM	#6 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,080 Thanks: 695 Thanked 1,248 Times in 1,042 Posts	Re: quick response needed for glitching rom 11 i twiddle the pot a little when its waiting for the writeback. it usualy comes back with it. the card is unlooped and ok but ird will not be on there. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

13-12-08, 12:57 PM	#8 (permalink)
sharkbait559 Technology Forums Join Date: Feb 2008 Location: Wales - Pure NTL Posts: 835 Thanks: 42 Thanked 67 Times in 65 Posts	Re: quick response needed for glitching rom 11 cards knackered mate , make sure you have the right com port and try reading a few times before you give up , i have it sometimes but it will read he 3rd or fourth time.

13-12-08, 12:59 PM	#9 (permalink)
hantsmale Senior Member Join Date: Sep 2007 Posts: 352 Thanks: 39 Thanked 16 Times in 15 Posts	Re: quick response needed for glitching rom 11 yes thought it was knackered last night.thanx for all that has helped with info gary

13-12-08, 01:23 PM	#10 (permalink)
sqwidge Thanks to those that help Join Date: Jul 2008 Location: At home Posts: 380 Thanks: 19 Thanked 32 Times in 29 Posts	Re: quick response needed for glitching rom 11 before you bin it you should also slide the card in and out of the reader a few times to remove any s.hit left on the prongs that read your card __________________ All information supplied is for educational purposes only.